Tuotetiedot Ominaisuudet ATV340U22N4E ATV340 2,2kW 380-480V, 3-vaihe,ethernet Sähkönumero : 3881313 varastokoodi : Kyllä Tuotetiedot Tuoteryhmä Tuote tai komponentti tyyppi Laitteen sovellus Laitteen lyhytnimi Vaihtoehtoinen Tuotteen kohde Asennusalusta EMC filter Oct 13, 2017 Altivar Machine ATV340 Taajuusmuuttaja Machine ATV340 Standard version Tasatahtimoottorit Oikosulkumoottorit Seinä IP suojausluokka IP20 vahvistaen IEC 61800-5-1 IP20 vahvistaen IEC 60529 Jäähdytystapa Integroitu kanssa 20 m motor cable maxi vahvistaen EN/IEC 61800-3 category C3 Pakotettu lämmön virtaus Syöttötaajuus 50...60 Hz +/- 5 % Syöttöverkko vaiheiden lukumäärä 3 vaihetta [Us] nimellissyöttöjännite 380...480 V - 15...10 % Moottorin teho kw Moottorin teho hp Syöttövirta Mahdollinen syötön Isc Näennäisteho Jatkuva lähtövirta Suurin transienttivirta 3 kw (normal duty) 2.2 kw (heavy duty) 3 hp (normal duty) 3 hp (heavy duty) 8.4 A 380 V without line choke (heavy duty) 6.6 A 480 V without line choke (heavy duty) 6.6 A 380 V with external line choke (normal duty) 5.3 A 480 V with external line choke (normal duty) 5.1 A 380 V with external line choke (heavy duty) 4.1 A 480 V with external line choke (heavy duty) 5 ka 5.2 kva 480 V (normal duty) 5.5 kva 480 V (heavy duty) 7.2 A 4 khz (normal duty) 5.6 A 4 khz (heavy duty) 7.9 A aikana 60 s (normal duty) 1 Vastuuvapauslauseke: Tätä asiakirjaa ei ole tarkoitettu tuotteiden sopivuuden tai luotettavuuden määrittämiseen tiettyjä käyttäjäsovelluksia varten, eikä sitä saa käyttää tähän tarkoitukseen.
Oikosulkumoottorin ohjausprofiili Tasatahtimoottorin ohjausprofiili Taajuusmuuttajan lähtötaajuus Nimelliskytkentätaajuus Kytkentätaajuus 9.7 A aikana 2 s (normal duty) 10.1 A aikana 2 s (heavy duty) 8 A aikana 60 s (heavy duty) Variable torque standard Optimized torque mode Constant torque standard Permanent magnet motor Reluctance motor 0.1...599 Hz 4 khz 2...16 khz säädettävä 4...16 khz with derating factor Turvatoiminto STO (safe torque off) SIL 3 Täydentävät tiedot Binääritulo logiikka Kommunikointiprotokolla Lisäkortti Lähtöjännite Sallittu tilapäinen virtapiikki Moottorin jättämän kompensointi Kiihdytys- ja hidastusrampit Jarrutus pysähdyksiin Suojaustyyppi Taajuusresoluutio Sähköinen liitäntä Liittmen tyyppi Fyysinen rajapinta Lähetyskehys 16 preset speeds Modbus TCP Modbus sarja Ethernet/IP Slot GP-X : digital and analog I/O extension module Slot GP-X : output relay extension module Slot GP-ENC : 5/12 V digital encoder interface module Slot GP-ENC : analog encoder interface module Slot GP-ENC : resolver encoder interface module <= virtalähteen jännite 1.1 x In varten 60 s (normal duty) 1.5 x In varten 60 s (heavy duty) 1.35 x In varten 2 s (normal duty) 1.8 x In varten 2 s (heavy duty) Säädettävä Voidaan vaimentaa Not available in permanent magnet motor law Automaattinen kuormasta riippumatta Linear adjustable separately from 0.01...9999 s S, U tai muokattava DC injektiolla Moottori: thermal protection Drive: thermal protection Drive: overheating Drive: line supply overvoltage Drive: line supply undervoltage Drive: break on the control circuit Moottori: "safe torque off" Drive: "safe torque off" Drive: short-circuit between motor phases Moottori: motor phase loss Drive: overcurrent Drive: output overcurrent between motor phase and earth Drive: output overcurrent between motor phases Drive: short-circuit between motor phase and earth Drive: motor phase loss Drive: DC Bus overvoltage Drive: input supply loss Drive: exceeding limit speed Display unit: 0.1 Hz Analog input: 0.012/50 Hz Screw terminal with clamping capacity: 1.5...4 mm², AWG 14...AWG 12 päällä line side Screw terminal with clamping capacity: 4...6 mm², AWG 12...AWG 10 päällä DC bus Screw terminal with clamping capacity: 1.5...4 mm², AWG 14...AWG 12 päällä moottori Screw terminal with clamping capacity: 0.2...2.5 mm², AWG 24...AWG 12 päällä control Connector(S)1 x RJ45-liitin, Modbus serial on front face Connector(S)1 x RJ45-liitin, Modbus serial varten HMI on front face Connector(S)2 x RJ45-liitin, Ethernet IP/Modbus TCP on front face 2-johdin RS485 Modbus serial RTU Modbus serial 2
Lähetysnopeus "Exchange mode" Tietomuoto Polarisaatiotyyppi Osoitteiden lukumäärä Pääsymenetelmä Syöttö Paikallisilmaisu Leveys Korkeus Syvyys Tuotteen paino Analogiatulojen lukumäärä 2 Analogiatulo tyyppi Binääritulon lukumäärä 8 10/100 Mbit/s Ethernet IP/Modbus TCP 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps Modbus serial Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP 8 bits, configurable odd, even or no parity Modbus serial Ei impedanssia Modbus serial 1...247 Modbus serial Slave Modbus TCP Slave Modbus RTU External supply for digital inputs: 24 V DC (19...30 V), <= 1.25 ma, protection type: overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kohm): 10.5 V DC +/- 5 %, <= 10 ma, protection type: overload and short-circuit protection Internal supply for digital inputs and STO: 24 V DC (21...27 V), <= 200 ma, protection type: overload and short-circuit protection 4 LED, mono/dual colour varten local diagnostic 4 LED, dual colour varten communication module status 85 mm 270 mm 232.5 mm 1.8 kg AI1 software-configurable current: 0...20 ma, impedanssi 250 Ohm, resoluutio 12 bittiä AI1 software-configurable temperature probe or water level sensor AI1 software-configurable voltage: 0...10 V DC, impedanssi 31.5 kohm, resoluutio 12 bittiä AI2 software-configurable voltage: - 10...10 V DC, impedanssi 20 kohm, resoluutio 12 bittiä Digitaalisen tulon tyyppi PTI programmable as pulse input: 0...30 khz, 24 V DC (<= 30 V) STOA, STOB safe torque off, 24 V DC (<= 30 V), impedanssi > 2.2 kohm DI1...DI5 programmable, 24 V DC (<= 30 V), impedanssi 4.4 kohm Input compatibility DI1...DI5: discrete input taso 1 PLC vahvistaen EN/IEC 61131-2 PTI: pulse input taso 1 PLC vahvistaen IEC 65A-68 STOA, STOB: discrete input taso 1 PLC vahvistaen EN/IEC 61131-2 Binääritulo logiikka Analogialähtö lukumäärä 1 Analogialähtö tyyppi Tulo-/Lähtötyyppi Näytteenoton kesto DI1...DI5 positive logic (source) tilassa 0: < 5 V, tilassa 1: > 11 V DI1...DI5 negative logic (sink) tilassa 0: > 16 V, tilassa 1: < 10 V PTI positive logic (source) tilassa 0: < 0.6 V, tilassa 1: > 2.5 V STOA, STOB positive logic (source) tilassa 0: < 5 V, tilassa 1: > 11 V Software-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resoluutio 10 bittiä Software-configurable current AQ1: 0...20 ma impedance 500 Ohm, resoluutio 10 bittiä Programmable as logic input/output DQ1: 0...1 khz, <= 30 V DC, < 100 ma Programmable as logic input/output DQ2: 0...1 khz, <= 30 V DC, < 100 ma Discrete input DI1...DI5: 2 ms (+/- 0.5 ms) Pulse input PTI: 5 ms (+/- 1 ms) Analog input AI1, AI2: 1 ms (+/- 1 ms) Analogialähtö AQ1: 5 ms (+/- 1 ms) Discrete input/output DQ1, DQ2: 2 ms (+/- 0.5 ms) Tarkkuus Analog input AI1, AI2: +/- 0.6 % for a temperature variation 60 C Analogialähtö AQ1: +/- 1 % for a temperature variation 60 C Lineaarisuus virhe Relay output number 2 Relay output type Päivitysaika Minimi kytkentävirta AI1, AI2: +/- 0.15 % of maximum value varten analog input AQ1: +/- 0.2 % varten analogialähtö Configurable relay logic R1: fault relay NO/NC 100000 cycles at maximum switching current Configurable relay logic R2: sequence relay Ei 100000 cycles at maximum switching current Relay output R1, R2: 5 ms (+/- 0.5 ms) Relay output R1, R2: 5 ma 24 V DC Maksimi kytkentävirta Relay output R1: 3 A 250 V AC päällä Resistiivinen kuorma (cos phi = 1 Relay output R1: 3 A 30 V DC päällä Resistiivinen kuorma (cos phi = 1 Relay output R1: 2 A 250 V AC päällä Induktiivinen kuorma (cos phi = 0.4 ja L/R = 7 ms Relay output R1: 2 A 30 V DC päällä Induktiivinen kuorma (cos phi = 0.4 ja L/R = 7 ms Relay output R2: 5 A 250 V AC päällä Resistiivinen kuorma (cos phi = 1 Relay output R2: 5 A 30 V DC päällä Resistiivinen kuorma (cos phi = 1 Relay output R2: 2 A 250 V AC päällä Induktiivinen kuorma (cos phi = 0.4 ja L/R = 7 ms Relay output R2: 2 A 30 V DC päällä Induktiivinen kuorma (cos phi = 0.4 ja L/R = 7 ms 3
Taajuusmuuttaja sovelluksen valinta Moottorin tehoalue AC-3 Moottorikäynnistimen tyyppi Packaging conveyor Packaging other application Hoisting tower crane Hoisting other application Material handling grouping conveyor Material handling palletizer - high performance Material working (wood, ceramic, stone, pvc, metal) cutting - high accuracy Material working (wood, ceramic, stone, pvc, metal) polishing Material working (wood, ceramic, stone, pvc, metal) grinding Material working (wood, ceramic, stone, pvc, metal) slitter Packaging filling bottles - synchronized operation Packaging feed conveyor - medium performance Packaging grouping boxing Packaging elevator Hoisting standard crane - hoist Material handling automatic storage / retrieval system Packaging shrinking wrapping 2.2...3 kw 380...440 V 3 vaihetta 2.2...3 kw 480...500 V 3 vaihetta Taajuusmuuttaja Ympäristötiedot Eristys Eristysresistanssi Äänitaso Tehohäviö W Toiminta-asento Teho- ja ohjausliittimien välillä > 1 MOhm 500 V DC for 1 minute to earth 55.4 db vahvistaen 86/188/EEC Luonnollinen lämmön virtaus: 65 W 380 V, switching frequency 4 khz (heavy duty) Pakotettu lämmön virtaus: 65 W 380 V, switching frequency 4 khz (heavy duty) Luonnollinen lämmön virtaus: 80 W 380 V, switching frequency 4 khz (normal duty) Pakotettu lämmön virtaus: 80 W 380 V, switching frequency 4 khz (normal duty) Pystysuora +/- 10 astetta Sähkömagneettinen yhteensopivuus 1.2/50 µs - 8/20 µs ylijännitesuojan testi taso 3 vahvistaen IEC 61000-4-5 Sähköiset transientti/purske sietotestit taso 4 vahvistaen IEC 61000-4-4 Elektrostaattisen purkauksen sietotesti taso 3 vahvistaen IEC 61000-4-2 Säteilevän radiotaajuisen sähkömagneettisen kentän häiriönsietotesti taso 3 vahvistaen IEC 61000-4-3 Suoritettu radiotaajuuksien sietotesti taso 3 vahvistaen IEC 61000-4-6 Epäpuhtausaste 2 vahvistaen EN/IEC 61800-5-1 Tärinänkestoisuus Iskunkestävyys Suhteellinen kosteus Ympäristön lämpötila käytettäessä Ympäristön lämpötila varastoitaessa -25...70 C Operointi korkeus 1.5 mm huipusta huippuun (f= 2...19 Hz) vahvistaen EN/IEC 60721-3-3 class 3M3 1 gn (f= 9...200 Hz) vahvistaen EN/IEC 60721-3-3 class 3M3 15 gn (kesto = 11 ms) vahvistaen EN/IEC 60721-3-3 class 3M3 5...95 % ilman kondensiota vahvistaen EN/IEC 60721-3-3 class 3K3 0...50 C without current derating (heavy duty) 0...40 C without current derating (normal duty) 50...60 C with current derating (heavy duty) 40...60 C with current derating (normal duty) <= 1000 m ilman alentamista 1000...3000 m with current derating 1 % per 100 m Ympäristölliset ominaisuudet Chemical pollution resistance class 3C3 vahvistaen EN/IEC 60721-3-3 Dust pollution resistance class 3S3 mukainen EN/IEC 60721-3-3 Standardit EN/IEC 61800-3 EN/IEC 61800-3 environment 1 category C2 EN/IEC 61800-3 environment 2 category C3 UL 508C EN/IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 Tuote sertifiointi Merkintä UL TÜV CSA REACH CE 4
Tuotteen ympäristötiedot Ympäristövaatimusten tila RoHS (päiväys: YYWW) REACH Tuotteen ympäristöprofiili Ohjeet tuotteen käsittelylle käyttöiän jälkeen Green Premium tuote Yhteensopiva - lähtien 1635 - Schneider Electric declaration of conformity Schneider Electric declaration of conformity Referenssi ei ylitä SVHC raja-arvoa Referenssi ei ylitä SVHC raja-arvoa Saatavilla Tuotteiden ympäristöprofiilit Saatavilla Tuotteiden ympäristöprofiilit 5