Suomen Standardisoimisliitto SFS. CEN Technical Bodies Mandate M/109

Transkriptio

1 Suomen Standardisoimisliitto SFS CEN Technical Bodies Mandate M/109

2 CEN Technical Bodies The standardization activities of CEN are steered by the CEN Technical Board (BT), who has full responsibility for the execution of CEN's work programme. Standards are prepared by Technical Committees (TCs). Each TC has its own field of operation (scope) within which a work programme of identified standards is developed and executed. TCs work on the basis of national participation by the CEN Members, where delegates represent their respective national point of view. This principle allows the TCs to take balanced decisions that reflect a wide consensus.

3 Technical Bodies CEN A Subcommittee can be established within a TC, in the case of large programs of work. The real standards development is undertaken by Working Groups (WGs) where experts, appointed by the CEN Members but speaking in a personal capacity, come together and develop a draft that will become the future standard. This reflects an embedded principle of 'direct participation' in the standardization activities. Workshops are particularly relevant in emerging or rapidly-changing technologies that require quickly-developed specifications or results of research projects. They produce CEN and/or CENELEC Workshop Agreements (CWAs).

4 CEN Technical Bodies 421 Sub committees 54 Working Groups 1628 Workshops

5 Suomen Standardisoimisliitto SFS CEN/TC 191 Fixed Firefighting Systems Fire and Rescue Service Equipment

6 Scope Standardization in the field of: components for fixed firefighting systems; the design, construction and maintenance of fixed firefighting systems primarily for installation in buildings and other construction works with recommendations for other possible applications and;

7 Scope components for fixed smoke and heat ventilation systems; the design, construction and maintenance of fixed smoke and heat ventilation systems for installation in buildings; fire extinguishing media for use in fixed systems and other firefighting equipment.

8 / SFS Sammutus- ja savunpoistolaitteiden jaosto Toimiala: CEN/TC 191, ISO/TC 21 SC5, SC6, SC8, SC11 Puheenjohtaja Santavuori Ari If Vahinkovakuutusyhtiö Oy Jäsenet Ahonen Ari If Vahinkovakuutusyhtiö Oy Häme Markus Kera Group Oy Kallioniemi Pekka Piikallio Oy Laakkonen Eino LähiTapiola Kinnunen Valtteri FP-ins Oy Johansson Björn Tukes Meurman Karoliina Tukes Pekkala Paavo Inspecta Tarkastus Oy Mero Petri Finanssialan Keskusliitto Rantala Arja Firecon Sihteeri Heiskanen Kati SFS

9 CEN/TC 191 Subcommittees Subcommittee CEN/TC 191/SC1 Title Smoke and heat control systems and components

10 CEN/TC 191 Working Groups Working group CEN/TC 191/WG 1 Title Fire extinguishing media - Powder CEN/TC 191/WG 2 Foam extinguishing systems CEN/TC 191/WG 3 Fire extinguishing media - Foam CEN/TC 191/WG 4 Powder extinguishing systems CEN/TC 191/WG 5 Sprinkler systems CEN/TC 191/WG 6 Gas extinguishing Systems and components CEN/TC 191/WG 9 Hydrant and hose reel systems

11 CEN/TC 191 WG 1 Fire extinguishing media - Powder Sammutusjauheet Scope Powder fire extinguishing media (excluding those suitable only for class D - metal fires - for use in fixed firefighting systems and other firefighting equipment.

12 CEN/TC 191 WG 2 Foam extinguishing systems Vaahtosammutuslaitteistot - Scope The design, construction and maintenance of fixed firefighting systems, for installation in buildings or other construction works, using low, medium or high expansion aqueous foam by surface or subsurface application, or volume flooding; and the components used for such systems. Published EN /A1 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components EN Fixed firefighting systems - Foam systems - Part 2: Design, construction and maintenance Corrigenda from EN13565 Part 2

13 CEN/TC 191 WG 2 Vaahtosammutuslaitteistot (+ WG 5 Sprinklerilaitteistot) Puheenjohtaja Ahonen Ari (WG 5) If Vahinkovakuutusyhtiö Oy Jäsenet Laakkonen Eino (WG 4, WG 6, WG 6 TG3) Kinnunen Valtteri Johansson Björn Meurman Karoliina Mero Petri Rantala Arja Vaari Jukka (WG 5 TG3) LähiTapiola FP-ins Oy Tukes Tukes Finanssialan Keskusliitto Firecon VTT Sihteeri Santavuori Ari (WG 2) If Vahinkovakuutusyhtiö Oy

14 CEN/TC 191 WG 3 Fire extinguishing media - Foam Vaahtosammutusaineet - Scope Foam concentrates for the preparation of low, medium and high expansion aqueous foam suitable for use in fixed firefighting systems and other firefighting equipment, and for application to fires of flammable liquids and/or other combustibles.

15 CEN/TC 191 WG 3 Vaahtosammutusaineet Puheenjohtaja Pekkala Paavo (WG 1 ja WG 3) Inspecta Tarkastus Oy Jäsenet Karppala Jyrki Rilanto Paul-Erik Peltek Oy Mero Petri Finanssialan Keskusliitto Sihteeri

16 CEN/TC 191 WG 3 Vaahtosammutusaineet EN Part 1 rev. EN Part 2 rev. EN Part 3 rev. EN Part 4 rev. Specification for medium expansion foam concentrates for surface application to water-immiscible liquid Specification for high expansion foam concentrates for surface application to water-immiscible liquids Specification for low expansion foam concentrates for surface application to water-immiscible liquids Specification for low expansion foam concentrates for surface application to water-miscible liquids

17 CEN/TC 191 WG 4 Powder Extinguishing Systems Jauhesammutuslaitteistot Scope The design, construction and maintenance of fixed firefighting systems hose for installation in buildings or other construction works, using powder; and the components used for such systems. EN :2001+A1: 2007 rev. Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components.

18 CEN/TC 191 WG 5 Sprinkler systems Scope The design, construction and maintenance of sprinkler systems and fixed water spray firefighting systems, for installation in buildings or other construction works; and the components used for such systems.

19 CEN/TC 191 WG 5 Sprinklerilaitteistot Puheenjohtaja Ahonen Ari (WG 5) If Vahinkovakuutusyhtiö Oy Jäsenet Laakkonen Eino (WG 4, WG 6, WG 6 TG3) Kinnunen Valtteri Johansson Björn Meurman Karoliina Mero Petri Rantala Arja Vaari Jukka (WG 5 TG3) LähiTapiola FP-ins Oy Tukes Tukes Finanssialan Keskusliitto Firecon VTT Sihteeri Santavuori Ari (WG 2) If Vahinkovakuutusyhtiö Oy

20 CEN/TC 191 WG 5 Sprinklerilaitteistot WG 5 on jakautunet 3 työryhmään TG1 (components) TG2 (installation rule) Sub group TG2 (residential sprinkler installation rule Sub group TG2 (pump set) TG3 (water mist)

21 CEN/TC 191 WG 5 Sprinklerilaitteistot TG ja 12 (harmonisoidut) Fixed firefighting systems components for sprinkler and water spray systems - Part 9: Deluge Valves; Part 12 Pump Sets rev. Fixed firefighting systems components for sprinkler and water spray systems - Part 1: Sprinklers pren (eiharmonisoidut) Fixed firefighting systems components for sprinkler and water spray systems - Part 14: Residential Sprinklers

22 CEN/TC 191 WG 5 Sprinklerilaitteistot TG 2 EN Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance Status of 1 st revision Published in august 2015 PrEN TG2 EN and part 12 (TG2) Status of work for the 2 nd revision Enquiry not expected before end of beginning of 2017 Residential sprinklers (component and installation rule) Enquiry started October 2015 Pump Set a first draft to be ready by sept 2015

23 CEN/TC 191 WG 5 Sprinklerilaitteistot TG 3 EN EN (?) EN Watermist system design and installation Watermist system - series of test protocols Watermist system - Components

24 CEN/TC 191 WG 6 Gas extinguishing Systems and components Kaasusammutuslaitteistot Scope To draft standards according to the schedule agreed by CEN TC 191, for the design, construction and maintenance of fixed fire fighting systems for installation in buildings or other construction works, using gaseous extinguishants by volume flooding or local application; and the components used in such systems, and the components

25 CEN/TC 191 WG 6 Kaasusammutuslaitteistot WG 6 on jakautunet 3 työryhmään TG1 (components) TG2 (aerosols) TG3 (gas extinguishing systems)

26 CEN/TC 191 WG 6 Kaasusammutuslaitteistot Puheenjohtaja Laakkonen Eino LähiTapiola Jäsenet Alarto Manu YTM-Industrial Oy Helkamo Matti Siemens Oy Janhonen Harri Pohjola Johansson Björn Tukes Kalsola Juha-Matti Are Oy Meurman Karoliina Tukes Mero Petri Finanssialan Keskusliitto Raitamaa Pentti Mako Oy Sihteeri Karila Kimmo Agis

27 CEN/TC 191 WG 6 Kaasusammutuslaitteistot TG 1 + TG 3 EN Revision EN EN Revision EN ,13 Wait until ISO is completed Physical properties and system design of gas extinguishing systems for extinguishant (ISO x:2006, modified) Fixed firefighting systems - Oxygen reduction systems - Design, installation, planning and maintenance Requesting 9 month tolerance Components for gas extinguishing systems Parts 4 8 and 13 (Requirements and test methods for check valves and non-return valves)

28 CEN/TC 191 WG 6 Kaasusammutuslaitteistot TG Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1: Requirements and test methods for components Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 2: Design, installation and maintenance

29 CEN/TC 191 WG 9 Hydrant and hose reel systems Pikapalopostit Scope The design and construction of fixed first aid firefighting hose systems for installation in buildings or other construction works, and mounted on walls or in cabinets and permanently connected to a water supply; and the components used for such systems.

30 CEN/TC 191 WG 9 Pikapalopostit Puheenjohtaja Hulkkonen Tapani Pivaset Oy Jäsenet Sihteeri SFS-EN SFS-EN Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose Fixed firefighting systems - Hose systems - Part 2: Hose system with lay-flat hose SFS-EN Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose.