T298/M02/2017 Liite 1 / Appendix 1 Sivu / Page 1(6) AKKREDITOITU TESTAUSLABORATORIO ACCREDITED TESTING LABORATORY ESPOTEL OY, TESTILABORATORIO ESPOTEL OY, TEST LABORATORY Tunnus Code Laboratorio Laboratory Osoite Address www www T298 Espotel Oy, Testilaboratorio Mattilanniemi 6 40100 JYVÄSKYLÄ Espotel Oy, Test Laboratory Mattilanniemi 6 FI-40100 JYVÄSKYLÄ FINLAND www.espotel.com www.espotel.com Testausalat Fields of testing Materiaali- ja tuotetestaus Material and product testing
T298/M02/2017 Liite 1 / Appendix 1 Sivu / Page 2(6) Materiaali- ja tuotetestaus, EMC/RF -testaus Material and product testing, EMC/RF-testing Kädessä pidettävät, liikuteltavat ja siirrettävät radio- ja multimedialaitteistot oheislaitteineen Mittaus- ja testauslaitteet ja - järjestelmät Lääkinnälliset laitteet Handheld, mobile and portable radio communication and multimedia devices with accessories Measurement and control devices and systems Medical devices and equipment Conformance testing of GSM Terminals (Methods and tests) GSM frequency bands included: GSM850, GSM900, GSM1800 and GSM1900 and Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mw; Part 1: Technical characteristics and test methods. Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive and Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive and Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive 3GPP TS 51.010-1 subclauses 12.1 and 12.2 EN 300 220 Limitations: Test frequency limited to 18 GHz. EN 300 328 EN 300 440 Limitations: Test frequency limited to 18 GHz
T298/M02/2017 Liite 1 / Appendix 1 Sivu / Page 3(6) and equipment and services; Part 1: Common technical requirements. and equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 khz and 40 GHz and equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS). and equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and inear monitoring devices and equipment; Part 17: Specific conditions for Broadband Data Transmission Systems and equipment and services; Part 18: Specific conditions for Terrestrial Trunked Radio (TETRA) equipment EN 301 489-1 EN 301 489-3 EN 301 489-7 EN 301 489-9 EN 301 489-17 EN 301 489-18 Limitation: EMC room measurement length 3m
T298/M02/2017 Liite 1 / Appendix 1 Sivu / Page 4(6) and equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) for Mobile and portable (UE) radio and ancillary equipment Radiated Spurious Emission measurement (EMC) Part 4-2: Testing and measurement techniques Electrostatic discharge immunity test (EMC); Part 4-6: Testing and measurement techniques Immunity to conducted disturbances, induced by radiofrequency fields Radio Equipment and Systems (RES); ElectroMagnetic Compatibility (EMC) for European digital cellular telecommunications system (GSM 900 MHz and DCS 1 800 MHz); Part 1: Mobile and portable radio and ancillary equipment - Product family standard for lifts, escalators and moving walks - Emission - Product family standard for lifts, escalators and moving walks - Immunity Industrial, scientific and medical equipment Radio -frequency disturbance characteristics Limits and methods of measurement Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement EN 301 489-24 Limitation: EMC room measurement length 3m EN 301 511 clauses 5.2.16 and 5.2.17 IEC/EN 61000-4-2 IEC/EN 61000-4-6 EN 300 342-1 EN 12015 EN 12016 CISPR 11 / EN55011 excluding radiated emissions CISPR 22 / EN55022 excluding radiated emissions
T298/M02/2017 Liite 1 / Appendix 1 Sivu / Page 5(6) of multimedia equipment - Emission requirements Specification for radio disturbance and immunity measuring apparatus and methods (EMC) Part 4-4: Testing and measurement techniques Electrical fast transient/burst immunity test (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and lightindustrial environments (EMC) - Part 6-2: Generic standards - Immunity for industrial environments CISPR 32 / EN55032 CISPR 16-2-1 IEC/EN 61000-4-4 EFT / Burst IEC/EN 61000-4-5 IEC/EN 61000-4-8 IEC/EN 61000-4-9 IEC/EN 61000-4-11 AC Dips and Interrupts IEC/EN 61000-4-29 DC Dips and Interrupts IEC/EN 61000-6-1 Generic Residential IEC/EN 61000-6-2 Generic Industrial
T298/M02/2017 Liite 1 / Appendix 1 Sivu / Page 6(6) Electrical equipment for measurement, control and laboratory use - EMC requirements Cable networks for television signals, sound signals and interactive services - Part 2: for equipment Alarm systems - Part 4: - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems Railway applications - -- Part 4: Emission and immunity of the signaling and telecommunications apparatus and Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements Arc welding equipment - Part 10: (EMC) requirements Information technology equipment Immunity characteristics Limits and methods of measurement (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and lightindustrial environments (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments IEC/EN 61326-1 IEC/EN 61326-2-1 IEC/EN 61326-2-2 IEC/EN 61326-2-3 IEC/EN 61326-2-4 IEC/EN 61326-2-5 EN 50083-2 EN 50130-4 EN 50121-4 EN 300 386 IEC/EN 60974-10 EN 55024 IEC/EN 61000-6-3 IEC/EN 61000-6-4