1(17) Sen lisäksi laaditaan NDT-standardeja myös levyille, putkille, valuille ja takeille.

Transkriptio

1 1(17) Carl-Gustaf Lindewald EUROOPPALAISTEN NDT-STANDARDIEN TILANNEKATSAUS YLEISTÄ Eurooppalaiset NDT-standardit laaditaan komiteassa CEN/TC 138 "Non destructive testing ja kansainväliset NDT-standardit komiteassa ISO/TC 135. Hitsaukseen liittyvät NDTstandardit laaditaan alakomiteassa CEN/TC 121/SC 5 "Non destructive testing of welds ja ISO/TC 44/SC 5 Testing and inspection of welds. Nämä standardit ovat ns. horisontaaleja standardeja, johon tuotestandardit tarvittaessa viitataan. Liitteessä on kaavio NDT-standardeja koskevasta järjestelmästä. Sen lisäksi laaditaan NDT-standardeja myös levyille, putkille, valuille ja takeille. Komiteat TC 138 ja TC 121/SC 5 tekevät kiinteästi yhteistyötä ja ne ovat perustaneet kullekin NDT-menetelmälle työryhmät. Organisaatio näkyy alla olevasta taulukosta, jossa suluissa oleva maa toimii sihteeristönä. Yleiset NDT-standardit CEN/TC 138 (Ranska) WG 1 Radiografia (Saksa) WG 2 Ultraääni (Saksa) WG 3 Pyörrevirta (Ranska) WG 4 Tunkeumaneste (Saksa) WG 5 Magneettijauhe (Espanja) WG 6 Vuototestaus (Italia) WG 7 Akustinen emissio (Italia) WG 8 Silmämääräinen tarkastus (Englanti) Hitsaukseen liittyvät standardit CEN/TC 121/SC 5 (Ranska) WG 1 Radiografia (Saksa) WG 2 Ultraääni (Sakska) WG 3 Pyörrevirta (Ranska) WG 4 Tunkeumaneste (Saksa) WG 5 Magneettijauhe (Suomi) WG 6 Silmämääräinen (Englanti) Hitsaukseen liittyvä standardisointitoiminta on siirtymässä ISOlle (ISO/TC 44/SC 5). Tällöin sihteeristöt saattavat vaihtua (ainakin Suomen osalta). Seuraavassa esitetään standardisointitilannetta menetelmittäin. Kohteita edeltävä numero viittaa saatavissa olevaan työryhmän asiakirjaan. Jos tunnus alkaa kirjaimilla SFS tarkoittaa se, että standardi on saatavana suomenkielisinä. RADIOGRAFIA YLEISSTANDARDIT EN NDT - Industrial radiographic illuminators - Minimum requirements. SFS-EN 444 NDT - General principles for radiographic examination of metallic materials by X- and gamma-rays.

2 2(17) SFS-EN NDT - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value (Revision of EN 462-1) NDT - Image quality of radiographs - Part 2: Concepts, image quality indicators (step and hole type), determination of image quality value (Revision of EN 462-2) NDT - Image quality of radiographs - Part 3: Image quality classes for ferrous metals (Revision of EN 462-3). NDT - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables (Revision of EN 462-4) NDT - Image quality of radiographs - Part 5: Image quality indicators (Duplex wire type), determination of total image unsharpness value (Revision of EN 462-5) NDT - Terminology - Part 3: Terms used in industrial radiographic testing. EN NDT Terminology Part 11: X-ray diffraction from polycrystalline and amorphous materials NDT - Industrial radiographic film - Part 1: Classification of films systems for industrial radiography (Revision of EN 584-1) Industrial radiographic film - Part 2: Control of film processing by means of reference values (Revision of EN 584-2) EN Characteristics of focal spots in industrial X-ray tube assemblies. Part 1: Scanning method. EN Characteristics of focal spots in industrial X-ray tube assemblies. Part 2: Pinhole camera radiographic method. EN Characteristics of focal spots in industrial X-ray tube assemblies. Part 3: Slit camera radiographic method. EN Characteristics of focal spots in industrial X-ray tube assemblies. Part 4: Edge method. EN Characteristics of focal spots in industrial X-ray tube assemblies. Part 5: Measurement of effective focal spot size of mini and microfocus X-ray tubes used for industrial radiography. EN Evaluation and determination of the X-ray voltage. Part 1: Voltage divider method. EN Measurement and evaluation of the X-ray voltage. Part 2:Constancy check by the thick filter method. EN Measurement and evaluation of the X-ray tube voltage. Part 3: Spectrometric method.

3 3(17) EN Non-destructive testing - Determination of the size of industrial radiographic sources - Radiographic method EN NDT-Radioscopic testing. Part 1: Quantitative measurement of imaging properties. EN NDT-Radioscopic testing. Part 2: Qualitative control and long term stability of imaging devices. EN General principles of radioscopic testing of construction materials by X- and gamma rays EN NDT-X- ray diffraction from polycrystalline and amorphous material Part 1: General principles EN NDT-X- ray diffraction from polycrystalline and amorphous material Part 2: Procedures EN NDT X-ray diffraction from polycrystalline and amorphous materials Part 3: Instruments EN NDT-Qualification of radiographic film digitization systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control EN NDT-Qualification of radiographic film digitization systems - Part 2: Minimum requirements for digitization systems according to the application field EN NDT Industrial computed radiography with storage phosphor imaging plates Part 1 Classification of systems EN NDT Industrial computed radiography with storage phosphor imaging plates Part 2 General principles for testing of metallic materials using X-rays and gamma rays EN NDT Test method for measurement of residual stress by X-ray diffraction EN NDT Radiation method Computed tomography - Part 1: Terminology EN EN EN NDT - Radiation method - Computed tomography - Part 2: Principle, equipment and samples NDT- Radiation methods - Part 3: Operation and interpretation NDT - Radiation methods - Part 4: Qualification ISO EN C TS NDT Test method for measurement of residual stress by neutron diffraction Äänestysvaiheessa Fpr 5579 Revision of EN 444

4 4(17) ISO/FDIS NDT Infrared thermography Vocabulary FprEN Revision of EN FprEN (N 1373) Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Part 1: Tangential radiographic inspection FprEN (N 1375) Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Part 2: Double wall radiographic inspection Työn alla: pren (N 390) Revision of EN HITSIT SFS-EN SFS-EN NDT of welds Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography Acceptance levels NDT of welds Part 1: Evaluation of welded joints in aluminium, and its alloys by radiography Acceptance levels SFS NDT of welds Radiographic examination of welded joints - Part 1: X- and gamma-ray techniques with film (Revision of EN 1435) NDT of welds Radiographic examination of welded joints - Part 2: Computed testing Revision of EN Revision of EN VALUT Valujen radiograafisesta kuvauksesta on julkaistu SFS-EN PUTKET Non-destructive testing of steel tubes. Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO :2011) Non-destructive testing of steel tubes. Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO :2011)

5 5(17) ULTRAÄÄNI YLEISSTANDARDIT SFS-EN ISO EN ISO SFS-EN ISO SFS-EN ISO EN ISO EN ISO SFS-EN Ultrasonic examination - Part 1: General principles. Ultrasonic examination - General principles. Ultrasonic examination - Part 2: Sensitivity and range setting Ultrasonic examination - Sensitivity and range setting Ultrasonic examination - Part 3: Transmission technique. Ultrasonic examination - Transmission technique. Ultrasonic examination - Part 4: Examination for defects perpendicular to the surface. Ultrasonic examination - Examination for defects perpendicular to the surface. Ultrasonic examination Part 5: Characterization and sizing of discontinuities Ultrasonic examination Characterization and sizing of discontinuities Ultrasonic examination - Part 6: Time-of-flight diffraction technique. (Revision of ENV 583-6) Ultrasonic examination - Time-of-flight diffraction technique. Ultrasonic examination Terminology (2. painos) SFS Ultrasonic examination - Specification for calibration block no. 1. (Revision of EN 12223) SFS EN EN SFS-EN SFS-EN Welds in steel - Calibration block nr 2 for ultrasonic examination of welds (Revision of EN 27963) Ultrasonic examination - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments (2. painos.) Ultrasonic examination - Characterization and verification of equipment - Part 2: Probes (2. painos). Ultrasonic examination - Characterization and verification of ultrasonic examination equipment -Part 3: Combined equipment NDT - Ultrasonic thickness measurements.

6 6(17) EN NDT - Ultrasonic thickness measurements (2. painos). CEN/TR EN EN NDT - Automated ultrasonic examination Selection and application of system NDT Ultrasonic testing - Characterization and verification of ultrasonic thickness equipment NDT Terminology Terms used in ultrasonic testing with phased arrays Äänestysvaiheessa: FprEN Revision of EN FprEN ISO/FDIS FprEN NDT Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment Ultrasonic thickness measurement NDT Characterization and verification of ultrasonic phased array systems Part 2: Probes Fpr Revision of EN Fpr Revision of EN Fpr Revision of EN Fpr Revision of EN Fpr Revision of EN Fpr Revision of EN Fpr (N 543) NDT Characterization and verification of ultrasonic phased array systems Part 3: Complete systems ISO/DIS pr pr Non-destructive testing - Ultrasonic testing Reference blocks and test procedures for the characterization of contact probe sound beams Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block NDT Characterization and verification of ultrasonic phased array systems Part 1: Instruments Työn alla:

7 7(17) HITSIT Welding Use of time-of-flight diffraction technique (TOFD) for examination of welds (Revision of CEN/TS 14751) SFS NDT of welds - Ultrasonic examination of welded joints - Acceptance levels (Revision of EN 1712) SFS SFS Welding Use of (semi)automated phase array technology for examination of welds NDT of welds. Time of flight diffraction technique (TOFD). Acceptance levels (Revision of EN 15617) NDT of welds - Ultrasonic examination of welded joints (Revision of EN 1714) NDT of welds Ultrasonic method Testing of welds in austenitic steels and nickel based alloys (2. painos). NDE of welds - Ultrasonic examination - Characterization of imperfections in welds (Revision of EN 1713) pr NDT- UT Technique of testing claddings produced by welding, rolling and explosion VALUT SFS-EN SFS-EN SFS-EN EN Founding - Ultrasonic examination - Part 1: Steel castings for general purposes Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings (2. painos) PUTKET Non-destructive testing of steel tubes. Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO :2011) Non-destructive testing of steel tubes. Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO :2011)

8 8(17) Non-destructive testing of steel tubes. Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO :2011) Non-destructive testing of steel tubes. Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO :2011) Non-destructive testing of steel tubes. Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO :2011) TAKEET EN EN NDT of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings NDT of steel forgings - Part 4: Ultrasonic testing of austenitic or austenitic-ferritic stainless steel forgings pren pren NDT of steel forgings - Part 4: Ultrasonic testing of ferritic or martensitic steel forgings NDT of steel forgings - Part 4: Ultrasonic testing of austenitic or austenitic-ferritic stainless steel forging LEVYT, TANGOT JA PROFIILIT SFS-EN EN EN SFS-EN Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) Iron and steel - Ultrasonic testing of broad flanged beams with parallel flanges and IPE beams Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) Non destructive testing - Ultrasonic testing of steel bars

9 9(17) PYÖRREVIRTATARKASTUS YLEISTÄ SFS Eddy current examination - General principles and basic guidelines (Revision of EN 12084) NDT - Terminology - Terms used in eddy current testing. (Revision of EN ) Eddy current testing - Equipment characteristics and verification - Part 1: Instrument characteristics and verification (Revision of EN ) Eddy current testing - Equipment characteristics and verification - Part 2: Probe characteristics and verification (Revision of EN ) Eddy current testing - Equipment characteristics and verification - Part 3: System characteristics and verification (Revision of EN ) Äänestysvaiheessa: Fpr Revision of Fpr Revision of HITSIT SFS-EN 1711 NDE of welds - Eddy current examination of welds by complex plane analysis. pr Revision of EN 1711 PUTKET EN :2011 EN :2011 Non-destructive testing of steel tubes. Part 2: Automated eddy current testing of seamless and welded (except submerged arcwelded) steel tubes for the detection of imperfections (ISO :2011) Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface

10 10(17) PINNOITEET SFS SFS Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitudesensitive eddy current method Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phasesensitive eddy-current method TUNKEUMANESTETARKASTUS YLEISTÄ SFS-EN NDT - Penetrant testing - Part 1: General principles. SFS Penetrant and magnetic particle testing - Viewing conditions (2. painos) Revision of ISO (EN 571-1) SFS NDT - Penetrant testing - Part 2: Testing of penetrant materials (Revision of ISO :2000). NDT - Penetrant testing - Part 3: Reference test blocks. NDT - Penetrant testing - Part 4: Equipment. NDT Penetrant testing Part 5: Penetrant testing at temperatures higher than 50 C. NDT Penetrant testing Part 6: Penetrant testing at temperatures lower than 10 C. NDT - Terminology - Part 6: Terms used in penetrant testing (2. painos) Äänestysvaiheessa: Fpr Revision of Fpr Revision of FprCEN/TR NDT - Penetrant and magnetic particle testing using blue light HITSIT SFS NDT of welds Penetrant testing of welds Acceptance levels (Revision of EN 1289) ISO/DIS Revision of 23277

11 11(17) VALUT EN SFS-EN Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die casting (2. painos) Founding - Liquid penetrant inspection - Part 2: Investment castings pren Revision of EN PUTKET Non-destructive testing of steel tubes. Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO :2011) TAKEET EN NDT of steel forgings Part 2: Penetrant testing pren NDT of steel forgings Part 2: Penetrant testing MAGNEETTIJAUHETARKASTUS YLEISTÄ SFS Non-destructive testing - Magnetic particle testing - Part 1: General principles Non destructive testing - Magnetic particle testing - Part 2: Detecting media Non-destructive testing - Magnetic particle testing - Part 3: Equipment SFS-EN Magnetic particle inspection - Terminology. ISO/DIS EN pr Revision of pr Revision of pr Revision of HITSIT SFS NDT of welds Magnetic particle examination of welds (Revision of EN 1290)

12 12(17) SFS NDT of welds Magnetic particle testing of welds Acceptance levels (Revision of EN 1291) ISO/DIS Revision of VALUT SFS-EN 1369 EN 1369 Founding - Magnetic particle inspection. Founding - Magnetic particle testing (2. painos) PUTKET Non-destructive testing of steel tubes. Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO :2011) TAKEET EN NDT of steel forgings Part 1: Magnetic particle inspection Työn alla: pren NDT of steel forgings Part 1: Magnetic particle inspection SILMÄMÄÄRÄINEN TARKASTUS YLEISTÄ EN SFS-EN EN NDT - Visual testing - General principles Vocabulary - Part 10: Terms used in visual testing NDT - Visual testing - Equipment HITSIT SFS Visual inspection of welds (Revision of EN 970) VALUT SFS-EN EN 1370:2011 Founding - Visual examination of surface discontinuities - Steel sand castings. Founding - Examination of surface condition (korvaa standardit SFS-EN ja SFS-EN 1370)

13 13(17) VUOTOTESTAUS YLEISTÄ EN EN 1518 EN 1593 EN 1779 EN EN EN EN NDT - Terms used in leak tightness testing. NDT - Leak testing - Characterization of mass spectrometer leak detector. NDT - Leak testing - Bubble emission method. NDT - Leak testing - Guide to the method selection. NDT - Leak testing - Pressure change method. NDT - Leak testing - Trace gas method. NDT - Leak testing - Calibration of reference leaks for gases. NDT Leak testing Guide to selection of instrumentation for the measurement of gas leakage PUTKET Non-destructive testing of steel tubes. Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detec tion of longitudinal and/or transverse imperfections (ISO :2011) Työn alla: NDT - Leak testing - Minimum requirements for MSLD and for sensor used in leak detection AKUSTINEN EMISSIO YLEISTÄ SFS-EN NDT- Terminology Part 9: Terms used in acoustic emission (2. painos) EN Acoustic emission - Equipment characterisation Part 1: Equipment description. EN Acoustic emission - Equipment characterisation Part 2: Verification (2. painos) EN EN EN EN Acoustic emission - General principles (2. painos). Acoustic emission Examination of metallic pressure equipment during proof testing Planar location of AE sources (2. painos) Acoustic emission Examination of metallic pressure equipment during proof testing Zone locations of AE-sources Acoustic emission General principles of acoustic emission testing of corrosion within metallic surrounding filled with liquid

14 14(17) EN Acoustic emission Testing of fibre-reinforced polymers. Specific methodology and general evaluation criteria Äänestysvaiheessa: FprEN Revision of EN NDT-HENKILÖSTÖN PÄTEVÖINTI EN 4179 Aerospace series - Qualification and approval of personnel for non-destructive testing SFS Qualification and certification of NDT personnel - General principles (Revision of EN 473) ISO/TR ISO/TR ISO/TR CEN/TR ISO CEN/TR Qualification of personnel for limited application of NDT NDT Guidelines for NDT training syllabuses NDT Guidelines for NDT personnel training organisations Code of practice for the approval of NDT personnel by recognized third party organisations under the provisions of Directive 97/23/EC Steel products Employer's qualification system for nondestructive testing (NDT) personnel Non-destructive testing. Interpretation of /IEC for NDT personnel certification application Äänestysvaiheessa: FprCEN/TR Revision of CEN/TR pr NDT - Evaluation of vision acuity of NDT personnel Työn alla: ISO/DTS TS (N 694) (TC 135/SC 7 N 214) NDT Perfomance based qualification NDT Discontinuity types to be exhibited in the test specimens for use in NDT personnel qualification examinations

15 15(17) MUITA STANDARDISOINTIKOHTEITA SFS CEN/TR EN EN SFS-EN EN 16090:2011 ISO/TS NDT of welds. General rules for metallic materials (Revision of EN 12062) "NDT-tarkastuksen huomioon ottaminen suunnittelussa". Brazing Non-destructive examination brazed joints Non destructive testing - Terminology - Part 1: General terms Non destructive testing - Terminology - Part 2: Terms common to the non destructive methods Non-destructive testing of steel tubes. Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO :2011) Copper and copper alloys - Estimation of average grain size by ultrasound NDT General terms and definitions Julkaistu on myös tekninen raportti CR NDT Generic NDE data format model Julkaistu on myös hitsien jännitysten mittaamista koskevia standardeja: ISO NDT Metal magnetic memory Part 1: General requirements ISO NDT Metal magnetic memory Part 2: Terms and definitions ISO NDT Metal magnetic memory Part 3: Inspection of welded joints PAINELAITTEIDEN TARKASTUS SFS-EN Lämmittämättömät painesäiliöt - Osa 5: Tarkastus ja testaus (2. painos, issue 3) EN Unfired pressure vessels - Part 5: Inspection and testing (2. painos issue 4) SFS-EN Metalliset teollisuusputkistot - Osa 5: Tarkastus ja testaus EN Metallic industrial piping - Part 5: Inspection and testing (2. painos, issue 1) SFS-EN Vesiputkikattilat ja niihin liittyvät laitteistot - Osa 6: Kattilan paineenalaisten osien valmistuksen aikainen tarkastus, dokumentointi ja merkintä (2. painos) SFS-EN Tulitorvikattilat - Osa 5: Tarkastukset valmistuksen aikana, dokumentaatio ja paineenalaisten osien tunnusmerkintä

16 16(17) Äänestysvaiheessa: EN /prA1 Unfired pressure vessels - Part 5: Inspection and testing (Revision of EN ) EN /prA1 Metallic industrial piping - Part 5: Inspection and testing (Revision of EN ) MISTÄ STANDARDEJA JA EHDOTUKSIA SAA? Valmiit standardit (EN) ja ehdotukset (pren ja FprEN) voi tilata Suomen Standardisoimisliitosta, puh. (09)

17 17(17) LIITE Tuotestandardi Tuotespesifikaatio - laatuvaatimukset - tarkastuslaajuus - hylkäämisen aiheuttamat toimenpiteet 5817 Hitsiluokat -geometria - virheiden koot Hitsien rikkomaton aineenkoetus. Yleisohjeet metallisille materiaaleille - tarkastusmenetelmä - tarkastustekniikka - hyväksymisrajat - tarkastushenkilöstö Silmämääräinen Radiografia Tunkeumaneste Pyörrevirta Ultraääni Magneettijauhe / EN 1711 Tuotestandardi Sanasto EN Sanasto EN Sanasto Sanasto Sanasto EN Sanasto EN Yleisohjeet EN Yleisohjeet EN 444 Yleisohjeet Yleisohjeet Yleisohjeet EN Yleisohjeet Laitteet EN Filmit /2 Laitteet Laitteet /3 Laitteet EN /3 Laitteet Indikaattorit /5 Tarkistuskappale Tarkastuskappale 7963 Tarkastusaineet NDT-henkilöstö 9712