INSTRUCTIONS FOR PUBLISHING IN THE REPORT SERIES

Transkriptio

1 LAPPEENRANTA UNIVERSITY OF TECHNOLOGY Publication Committee October, 2010 INSTRUCTIONS FOR PUBLISHING IN THE REPORT SERIES Report series The Lappeenranta University of Technology report series are considered either faculty or unit-specific. The respective faculty/unit is responsible for the contents as well as for the printing costs. Regarding document layout and distribution, the recommendations of the Publishing Committee should be respected. The Publication Committee gives permission to establish a report series and approves the title of the series. The Publication Committee recommends that the title of a report series should include the following information: the name of the publishing faculty/unit followed by the case-specific characterization: Research Report Report Lecture Notes Manual Acceptance for publication Financing Research results and descriptions, lecture notes etc. related to the scientific fields of the respective faculty/unit can be published in the report series. Each faculty/unit approves publications to its report series itself and also decides the number of copies printed. The publishing faculty/unit is responsible for the publication costs of the report series. Publication procedure Faculty/units are responsible for printing of their own publications. The University Library provides the publications with ISBN and ISSN codes but the serial numbers are given by the publishing faculty/unit. 1

2 Layout The Publication Committee recommends a standard layout for the report series to be used. The Publication Committee also recommends that the cover page and the title page should include the following information 1) front cover: name of the university in Finnish and in English faculty and department in Finnish faculty and department in English title of the publication series in Finnish and in English, serial number author(s) and title of the publication 2) title page (model enclosed): top of page: title of the publication series in Finnish and in English, serial number center of page: author(s) and title of publication bottom of page: address of the unit, ISBN- and ISSN-codes and publishing location and year 3) abstract: The Publication Committee recommends that the abstract of the publication is at least in English. A model of the abstract structure is enclosed. 4) back cover: ISBN of the printed version ISBN of the PDF-version ISSN publishing location and year Distribution and sales Each faculty/unit takes responsibility for the distribution and sales of its own report series. According to the legal deposit copy law, free copies should be turned over to the University Library. In addition, an adequate number of copies should be given to the University Library for the Library collection and for document exchange with other institutions. The University Library arranges the official distribution of the reports. The Publication Committee recommends that the publications be sold in the Aalef bookstore. Furthermore, the Library will supply the Granum e-store with publications for sale. Orders placed to Granum will be delivered by Aalef as well. 2

3 Appendices 1. Reference material 2. Abstract 3. List of LUT report series 4. Title page model 3

4 Appendix 1 Reference material SFS Suureet ja yksiköt. Suurenimet, tunnukset ja yksiköt. Quantities and units. Names, symbols and units for quantities. 2. p. [2 nd edition.] SFS Kirjallisuusviitteiden laatiminen. Bibliographic references. 2. p. [2 nd edition.] SFS Tiivistelmien laatiminen ja käyttö. Abstracts for publications and documentation SFS 5831.Viittaaminen sähköisiin dokumentteihin tai niiden osiin. Bibliographic references. Electronic documents or parts thereof SFS-ISO 31-0+A1 Suureet ja yksiköt. Osa 0: Yleiset periaatteet. Quantities and units. Part 0: General principles SFS-ISO A1 SI-yksiköt sekä suositukset ja niiden kerrannaisten ja eräiden muiden yksiköiden käytöstä. SI units and recommendations for the use of their multiples and of certain other units SFS-ISO Suureet ja yksiköt. Osa 11: Matemaattiset merkinnät fysikaalisissa tieteissä ja tekniikassa. Quantities and units. Part 11: Mathematical signs and symbols for use in the physical sciences and technology Above-mentioned standards are available on the lending desk at the library. Suureet ja yksiköt: SI-mittayksikköjärjestelmä. Quantities and units. The international system of units (SI). 3. uud. p. SFS-käsikirja 19. Helsinki The ACS style guide. A manual for authors and editors. Ed. By Janet S. Dodd. 2 nd ed. Washington, DC. American Chemical Society Airila, Mauri & Pekkanen, Martti. Tekniikan alan väitöskirjaopas. [Instructions for Writing a Technical Thesis.] Espoo.Teknillinen korkeakoulu. [Helsinki University of Technology.] Hirsjärvi, Sirkka & Remes, Pirkko & Sajavaara, Paula. Tutki ja kirjoita. 10., osin uud. laitos. Helsinki

5 Kauranen, Ilkka & Ropponen, Pasi & Aaltonen, Mika, Tutkimusraportin kirjoittamisen opas. [Instructions for Writing a Research Report.] Otaniemi. Teknillinen korkeakoulu. [Helsinki University of Technology.] Mälkiä, Matti. Teksti- ja kirjallisuusviitteiden laatiminen. 2. p. Tampereen yliopisto. Hallintotiede 1994 B 6. Nykänen, Olli. Toimivaa tekstiä. Opas tekniikasta kirjoittaville. [Efficient Text. Instructions for Technical Writers. ] Helsinki. Tekniikan Akateemisten Liitto TEK. [The Finnish Association of Graduate Engineers TEK.] Quantities, units and symbols in physical chemistry. Prep. For publication by Ian Mills et al. 2 nd ed. IUPAC. Oxford. Blackwell Tirronen, Kerttu & Rautanen, Teemu & Ukskoski, Leena. Tutkijan julkaisuopas. Espoo. VTT

6 Abstract Appendix 2 Bibliographical information should be inserted in the abstract before the text part Keywords are inserted after the text part. ABSTRACT Name of author Title of publication Publishing location and year (Lappeenranta 200x) Number of pages (xx p.) Name of the series and serial number ISBN code, ISSN code The text part of the abstract Keywords 6

7 List of LUT report series 10/2010 Appendix 3 Updated October 2010 Teknillinen tiedekunta Faculty of Technology Teknillinen tiedekunta. LUT Energia / Faculty of Technology. LUT Energy Tutkimusraportti - Research report ISSN Opetusmoniste Lecture notes ISSN Teknillinen tiedekunta. LUT Kemia / Faculty of Technology. LUT Chemistry Julkaisu - Report ISSN Opetusmoniste - Lecture notes ISSN Teknillinen tiedekunta LUT Metalli / Faculty of Technology. LUT Mechanical Engineering Tutkimusraportti - Research report ISSN Teknistaloudellinen tiedekunta Faculty of Technology Management Tietotekniikan laitos / Information Technology Käsikirja - Manual ISSN Lecture notes - Opetusmoniste - ISSN Raportti - Report ISSN Research report - Tutkimusraportti ISSN Tuotantotalouden laitos / Industrial Engineering and Management Opetusmoniste - Lecture notes ISSN Selvitys - Report ISSN Tutkimusraportti - Research report ISSN Studies in industrial engineering and management ISSN Kauppatieteellinen tiedekunta School of Business Raportti - Report ISSN Tutkimusraportti - Research report ISSN Kauppatieteellisen tiedekunnan tutkimuksia - Studies in School of Business ISSN Opetusmoniste - Lecture notes 7

8 o o o o o o o o o o o o o o o o o o Etelä-Karjala-instituutti South Karelian Institute Julkaisu Publication ISSN Raportti Report ISSN Koulutus- ja kehittämiskeskus / Centre for Training and Development Julkaisu - Publication ISSN LIITU Liiketoiminnan tutkimusyksikkö (Lahden yksikkö) Tutkimusraportti ISSN Työpapereita ISSN Northern Dimension Research Centre Publication ISSN Technology Business Research Center Working Papers ISSN Research Reports ISSN Hallinnon julkaisuja ISSN Kielikeskuksen julkaisuja ISSN Lappeenrannan teknillisen yliopiston kirjaston julkaisuja ISSN (Lappeenranta University of Technology Library Publications) 8

9 Lappeenrannan teknillinen yliopisto Teknillinen tiedekunta. LUT Metalli Tutkimusraportti XX Lappeenranta University of Technology Faculty of Technology. LUT Mechanical Engineering Research report XX Appendix 4 Updated January 2010 Author(s) Title of the publication Lappeenranta University of Technology Faculty of Technology LUT Mechanical Engineering P.O. Box 20 FI LAPPEENRANTA ISBN XXX-X ISSN XXXX-XXXX Lappeenranta