T259/M09/2016 Liite 1 / Appendix 1 Sivu / Page 1(10) AKKREDITOITU TESTAUSLABORATORIO ACCREDITED TESTING LABORATORY TEKNOLOGIAN TUTKIMUSKESKUS VTT OY, ÄLYKÄS TEOLLISUUS JA ENERGIAJÄRJESTELMÄT SEKÄ LUONNONVARA- JA YMPÄRISTÖRATKAISUT VTT TECHNICAL RESEARCH CENTRE OF FINLAND LTD, SMART INDUSTRY AND ENERGY SYSTEMS AND SOLUTIONS FOR NATURAL RESOURCES AND ENVIRONMENT Tunnus Code Laboratorio Laboratory Osoite Address www www T259 Teknologian tutkimuskeskus VTT Oy, Älykäs teollisuus ja energiajärjestelmät sekä Luonnonvara- ja ympäristöratkaisut PL 1000 02044 VTT (Kemistintie 3 /Biologinkuja 5 ja 7 /Otakaari 3, 02150 ESPOO) www.vtt.fi VTT Technical Research Centre of Finland Ltd., Smart industry and energy systems and Solutions for natural resources and environment P.O.Box 1000 FI-02044 VTT FINLAND (Kemistintie 3 /Biologinkuja 5 ja 7 /Otakaari 3, FI-02150 ESPOO) www.vtt.fi
T259/M09/2016 Liite 1 / Appendix 1 Sivu / Page 2(10) Testausalat Fields of testing Materiaali- ja tuotetestaus Material and product testing Ympäristötestaus Environmental testing
T259/M09/2016 Liite 1 / Appendix 1 Sivu / Page 3(10) Materiaali- ja tuotetestaus, NDT-testaus Material and product testing, NDT testing Metalliset materiaalit Metallic materials Radiografinen kuvaus Radiographic examination SFS-EN ISO 19232-1 (2013) SFS-EN ISO 19232-2 (2013) SFS-EN ISO 19232-3 (2013) SFS-EN ISO 19232-4 (2013) SFS-EN ISO 19232-5 (2013) SFS-EN 25580 (1992) SFS-EN 444 (1994) ASTM E 1000-92 (1992) ASME V/Article 2 (1989, 1998) ASME SE-94 (1992) (ident. ASTM E 94-89 (1989)) Silmämääräinen tarkastus Visual examination Pyörrevirtatarkastus Eddy current examination Magneettijauhetarkastus Magnetic particle examination Tunkeumanestetarkastus Liquid penetrant examination SFS-EN 583-1 (1999) SFS-EN 583-2 (2001) SFS-EN 583-3 (1997) SFS-EN 583-4 (2002) SFS-EN 583-5 (2001) SFS-EN ISO 2400 (2013) SFS-EN 12668-3 (2000) SFS-EN ISO 8501-1 (2007) SFS-ISO 8501-2 (2001) SFS-EN 13018 SFS-EN ISO 2360 (2004) SFS-EN 2084 (2001) SFS-EN ISO 15549 (2011) SFS-EN ISO 9934-1 (2002) ASME SE-709 (2004) SFS-EN 571-1 (1997) SFS-EN ISO 3452-1 (2013) ASME SE-165 (2004) Hitsausliitokset Welds SFS-EN ISO 17635:en (2010) SFS-EN 12952-6 (2011) SFS-EN 12953-5 (2002) SFS-EN 13445-5 (2011) SFS-EN 13480-5 (2013)
T259/M09/2016 Liite 1 / Appendix 1 Sivu / Page 4(10) Valut Castings Silmämääräinen tarkastus Visual examination Radiografinen kuvaus Radiographic examination Magneettijauhetarkastus Magnetic particle examination Tunkeumanestetarkastus Liquid penetrant examination Pyörrevirtatarkastus Eddy current examination Silmämääräinen tarkastus Visual examination SFS-EN 970 (1997) SFS-EN ISO 17637 (2011) ISO 5817 (2006) ISO 10042 (2006) SFS-EN ISO 13919-1 (1996) SFS-EN ISO 13919-2 (2001) SFS-EN 1435 (1998) SFS-EN 12517 (1998) SFS-EN ISO 10675 (2013) ISO 17636 (2003) SFS-EN 1714 (1998) SFS-EN ISO 17640 (2011) SFS-EN 1713 (1998) SFS-EN ISO 23279 (2010) SFS-EN 1712 (1998) SFS-EN ISO 11666 (2011) ASME V Article 4 ja 5 (1989, 1998) SFS-EN ISO 7963 (2010) SFS-EN 1290 (1998) SFS-EN ISO 17638 (2010) SFS-EN ISO 23278 (2010) SFS-EN 1291 (1998) ASME V art. 7 (2004) SFS-EN 571-1 (1997) SFS-EN ISO 3452-1:2013 SFS-EN 1289 (1998) SFS-EN ISO 23277 (2010) ASME V art. 6 (2004) SFS-EN 1711 (2000) SFS-EN 12084 (2001) SFS-EN ISO 15549 (2011) NT NDT 011 (1992) SFS-EN 12454 (1998) SFS-EN 1370 (2012)
T259/M09/2016 Liite 1 / Appendix 1 Sivu / Page 5(10) Takeet Forgings Putket Pipes Levyt Plates Radiografinen kuvaus Radiographic examination Pyörrevirtatarkastus Eddy current examination SFS-EN 12681 (2003) ASME SE-1030 (1992) (ident. ASTM E 1030-84 (1984)) ASME SE-186 (1992) (ident. ASTM E 186-84 (1984)) ASME SE-280 (1992) (ident. ASTM E 280-84 (1984)) ASME SE-446 (1992) (ident. ASTM E 446-84 (1984)) ASTM E-155 (1985) ASTM E-505 (1984) SFS-EN 12680-1 (2003) SFS-EN 12680-2 (2003) SFS-EN 12680-3 (2012) ASME SA 609 (1992) (ident. ASTM A 609-78 (1978)) SFS-EN 10228-3 (1998) SFS-EN 10228-4 (1999) ASME SA-338 (1992) (ident. ASTM A 388-80 (1980)) SFS-EN 10246-17 (2000) SFS-EN ISO 10893-8 (2011) ASME V Art.8. AppI (1992) SFS-EN 12084 (2001) ASTM E 215 (1987) ASTM E 243 (1990) ASTM E 309 (1993) ASTM E 426 (1992) ASTM E 571 (1992) ASTM E 690 (1991) DIN 54141 Teil 3 (1987) SS 11 43 05 (1984) SFS-EN 10160 (1999) SEL 072 + Beiblatt (1977) Materiaali- ja tuotetestaus, Rikkova aineenkoetus Material and product testing, Destructive testing Metallit Metallic materials Vetokoe Tensile testing SFS-EN ISO 6892-1 SFS-EN ISO 6892-2 ISO 6892 TH/VETOKOE-1a
T259/M09/2016 Liite 1 / Appendix 1 Sivu / Page 6(10) Valmistajan tiloissa: on Manufacturers Site: Ruuvit Screws Iskukoe. Charpyn V-koe Charpy impact test. V notch. Metallien kovuuskoe Metal hardness test Murtumissitkeys. Referenssilämpötila. Fracture toughness. Reference temperature Murtumissitkeys Fracture toughness test (J-R, JIc) Hitsauksen menetelmäkokeen rikkova testaus Destructive testing of welding procedure test Metallien kovuuskoe Metal hardness test Materiaali- ja tuotetestaus, Rikkova aineenkoetus, Säteilytetyt metallit Material and product testing, Destructive testing, Irradiated metals Säteilytetyt metallit Irradiated metallic materials Vetokoe Tensile test Iskukoe. Charpyn V-koe Charpy impact test. V notch. SFS-EN ISO 148-1 TH/CH-V-1a SFS-EN ISO 6506-1 SFS-EN ISO 6508-1 SFS-EN ISO 6507-1 TH/KOVUUS-1a ASTM E 1921-08 menetelmäohjeet/guidelines: T259-HC/ASTM1921-1a T259-HC/ASTM1921-1b (in English) ASTM E1820-11 TH1/FT test-astm E1820 SFS-EN ISO 15614-1 SFS-EN ISO 15614-2 TH/HMK-1a SFS-EN ISO 6506-1 TH/RuKo-1.1 SFS-EN ISO 6892-1 SFS-EN ISO 6892-2 ASTM E21-09 ASTM E8/8M-11 HC-tensile test1.1 ISO 14556:2000(E), SFS-EN ISO 148-1 ja/and ASTM E 23-07 menetelmäohjeet/guidelines: T259-HC/CH-V-1a T259-HC/CH-V-1b (in English)
T259/M09/2016 Liite 1 / Appendix 1 Sivu / Page 7(10) Kovuuskoe, Vickers Hardness test, Vickers Murtumissitkeys. Referenssilämpötila. Fracture toughness. Reference temperature. - esiväsytysproseduuri - prefatigue procedure - sauvan rekonstituutiotekniikka - Reconstitution of specimen (fracture toughness, Charpy V) SFS-EN ISO 6507-1 HC-hardness test-1.0 ASTM E 1921-08 ASTM E1921-13 menetelmäohjeet/guidelines: T259-HC/ASTM1921-1a T259-HC/ASTM1921-1b (in English) ASTM E1921-08 ja ASTM E1820-08 menetelmäohjeet/guidelines: T259-HC/PREFAT-1a T259-HC/PREFAT-1b (in English) ASTM E1253-07 menetelmäohjeet/guidelines: T259-HC/ASTM1253-1a T259-HC/ASTM1253-1b (in English) Ympäristötestaus, Päästömittaukset Environmental testing, Emission measurements Ajoneuvojen sähkökäytöt Electric drive trains intended for the propulsion of motor vehicles Raskaan kaluston moottorit, jotka on tarkoitettu käytettäviksi ajoneuvoissa. Heavy-duty engines intended for use in vehicles on the road. Sähkökäytön nettotehon ja 30 minuutin maksimitehon mittaaminen Measurement of net power and the maximum 30 minutes power of electric drive trains Säännellyt pakokaasupäästöt: CO, HC, NOx, NMHC, CH4, hiukkaspäästöt ja pakokaasun opasiteetti Regulated exhaust emissions: CO, HC, NOx, NMHC, CH4, particulates and gas opacity ECE sääntö R85, liite 6 UN Regulation R85, Appendix 6 VTT:n koodi/vtt code M02S) Lisäysdirektiivit direktiiviin 88/77/EEC Amendments to directive 88/77/EEC VTT:n koodi/vtt code M02C)
T259/M09/2016 Liite 1 / Appendix 1 Sivu / Page 8(10) Raskaat ajoneuvot Heavy-duty vehicles Työkoneiden moottorit (alle 560 kw) Off-road engines (below 560 kw) Työkoneiden moottorit (alle 560 kw) Off-road engines (below 560 kw) Keskinopeat moottorit Medium speed engines Säännellyt pakokaasupäästöt: CO, HC, NOx, NMHC, CH4, hiukkaspäästöt. Energiankulutus Regulated exhaust emissions: CO, HC, NOx, NMHC, CH4 particulates. Fuel economy Säännellyt pakokaasupäästöt: CO, CO2, HC, NMHC, NOx ja hiukkaspäästö Regulated exhaust emissions: CO, CO2, HC, NMHC, NOx and particulate matter Moottorin nettotehon, -vääntömomentin sekä polttoaineen ominaiskulutuksen mittaaminen Measurement of net power, net torque and specific fuel consumption Säännellyt pakokaasupäästöt: CO, HC, NOx ja hiukkaspäästö Regulated exhaust emissions: CO, HC, NOx and particulate matter Sisäinen menetelmä, VTT:n koodi MK02E (viittaukset direktiiveihin 1999/96/EC, 70/220/EEC,91/441/EEC, 98/96/EC ja SAEJ2711 menetelmään) In-house method, VTT code MK02E (ref. Directives 1999/96/EC, 70/220/EEC, 91/441/EEC, 98/96/EC and SAEJ2711 recommended practice) Direktiivi 97/68/EC ja sen lisäysdirektiivit ISO 8178 Parts 1, 4, 5, 6 Sääntö UN/ECE R96 Directive 97/68/EC and it s amendments ISO 8178 Parts 1, 4, 5, 6 Regulation UN/ECE R96 VTT:n koodi/vtt code M02A, M02C ECE sääntö R120, liite 4 ECE Regulation No. 120, Annex 4 VTT:n koodi/vtt code M02A ISO 8178 Parts 1, 2, 4 ISO 8178 Parts 1, 2, 4 VTT:n koodi/vtt code M02D
T259/M09/2016 Liite 1 / Appendix 1 Sivu / Page 9(10) Henkilö- ja pakettiautot Light-duty vehicles Henkilö- ja pakettiautot Light-duty vehicles Poistokaasu Exhaust gases from stationary sources Poistokaasu Exhaust gases from stationary sources Säännellyt pakokaasupäästöt: CO, HC, NOx sekä dieselautoilla hiukkaspäästöt Regulated exhaust emissions: CO, HC, NOx and particulates in the case of diesel vehicles Polttoaineen kulutus ja hiilidioksidipäästöt Fuel consumption and carbon dioxide emissions Kaasumaisten komponenttien määrittäminen jatkuvatoimisella FT-IR-tekniikalla, CO, CO2, H2O, HCl, HCN, HBr, HF, NH3, NO, NO2, O2 ja SO2 Determination of gaseous components with continuous FT-IR-technique, CO, CO2, H2O, HCl, HCN, HBr, HF, NH3, NO, NO2, O2 and SO2 Hiukkasten näytteenotto, hiukkaspitoisuuden ja päästön määritys Particle sampling and determination of particle concentration and emission E-sääntö n:o 83, Revisio 3, lisäys 2 (Supplement 7 to the 05 series of amendments Date of entry into force: 26 February 2009). Testimenetelmä on kuvattu kokonaisuudessaan lisäyksessä Annex 4. ECE Regulation No. 83, Revision 3 - Amendment 2 (Supplement 7 to the 05 series of amendments Date of entry into force: 26 February 2009). Test method is described in Annex 4. VTT:n koodi/vtt code MK01 E-sääntö n:o 101, revisio 2 (Supplement 6, 4 April 2005). Testimenetelmä on kuvattu lisäyksessä Annex 6. ECE Regulation No. 101, Revision 2 (Supplement 6 to the original version of the Regulation - Date of entry into force: 4 April 2005). Test method is described in Annex 6. VTT:n koodi/vtt code MK01A Jatkuvatoiminen FT-IRtekniikka, SFS 5624 FT-IR-technique, continuous measurement, SFS 5624, Technical Guidance Note M22 menetelmäohje/guideline TK5046/1 SFS-EN 13284-1 menetelmäohje /Guideline TK5046/2 Ympäristötestaus, Teollisuuden kiinteät jätteet sekä veden kanssa kontaktissa olevat rakennustuotteet Environmental testing, Industrial solid wastes and outdoor construction products in contact with water
T259/M09/2016 Liite 1 / Appendix 1 Sivu / Page 10(10) Jätteet ja sivutuotteet Wastes and secondary raw materials Stabiilit jätteet ja sivutuotteet Stable wastes and secondary raw materials Jätteet ja sivutuotteet Wastes and secondary raw materials Jätteet ja sivutuotteet Wastes and secondary raw materials Liukenevien aineiden tutkiminen kolonnitestillä Leaching of compounds by column test from granular material Kumulatiivisen liukenemisen tutkiminen kiinteytetyistä tai monoliittisista materiaaleista. Study on cumulative leaching from solidified or monolithic materials by diffusion test Materiaalista liukenevien aineiden karkea arviointi laadunvalvontatestillä (ravistelutesti) Study on leaching of compounds from materials by compliance tests (batch leaching test) Liukenevien aineiden tutkiminen eri ph-arvoissa (phstaattinen testi) (ravistelutesti) Study on the leaching behavior of compounds at specified phvalues by using ph-static test series CEN/TS 14405 menetelmäohje/guideline KET 3600197 FprCEN/TS 16637-2 EN 15863 menetelmäohje/guideline KET 3600397 EN 12457 menetelmäohje/guideline KET 3600397 EN 14997 menetelmäohje/guideline KET 3601697