KEMESTA ry Eurooppalaiset lausuntopyynnöt Tässä raportissa luetellaan kansalliselle lausuntokierrokselle lähetetyt CENin (ml. ECISS) ehdotukset sekä CENin ja ISOn yhteiset ehdotukset. Kysymme näiden ehdotusten osalta hyväksyntää EN-standardeiksi sekä CENin ja ISOn yhteisten ehdotusten osalta myös hyväksyntää ISO-standardeiksi. Kaikki hyväksytyiksi tulleet EN-standardit on vahvistettava kansallisiksi SFS-standardeiksi. Lausuntopyynnöt luetellaan komiteakohtaisesti. Luettelo sisältää lausuntopyyntöjä väliltä LP 2013013... LP 2013032 CEN/TC 172 Pulp, paper and board LP 2013028 pren ISO 12625-7 Tissue paper and tissue products. Part 7: Determination of optical properties. Measurement of brightness and colour with D65/10 (outdoor daylight) (ISO/DIS 12625-7:2013) Korvaa standardin SFS-EN ISO 12625-7:2007 Kansallinen lausuntoaika päättyy: 2013-04-22 Vastuuhenkilö: Tuula Rantalaiho CEN/TC 193 Adhesives LP 2013032 FprEN 16254 Adhesives. Emulsion polymerized isocyanate (EPI) for load-bearing timber structures. Classification and performance requirements Sivuja/Pages: 19 Kansallinen lausuntoaika päättyy: 2013-04-22 Vastuuhenkilö: Tuula Rantalaiho CEN/TC 207 Furniture LP 2013026 pren 1021-1 rev Käsittelyvaihe: CENin lausuntokierros Furniture. Assessment of the ignitability of upholstered furniture. Part 1: Ignition source smouldering cigarette Sivuja/Pages: 23 Kansallinen lausuntoaika päättyy: 2013-04-22 Vastuuhenkilö: Tuula Rantalaiho LP 2013027 pren 1021-2 rev Käsittelyvaihe: CENin lausuntokierros Furniture. Assessment of the ignitability of upholstered furniture. Part 2: Ignition source match flame equivalent Sivuja/Pages: 23 Kansallinen lausuntoaika päättyy: 2013-04-22 Vastuuhenkilö: Tuula Rantalaiho 1
CEN/TC 23 Transportable gas cylinders LP 2013031 EN ISO 11120:1999/FprA1 Käsittelyvaihe: CENin ja ISOn rinnakkaisäänestys Gas cylinders. Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l. Design construction and testing. Amendment 1: Requirements for design of tubes for embrittling gases (EN ISO 11120:1999/FDAM 1:2013) 2008/68/EC Directive 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods Kansallinen lausuntoaika päättyy: 2013-04-22 Vastuuhenkilö: Tuula Rantalaiho CEN/TC 249 Plastics LP 2013021 pren ISO 11403-1 rev Plastics. Acquisition and presentation of comparable multipoint data. Part 1: Mechanical properties (ISO/DIS 11403-1:2012) Kansallinen lausuntoaika päättyy: 2013-04-08 Vastuuhenkilö: Tuula Rantalaiho CEN/TC 392 Cosmetics LP 2013024 pren 16521 Käsittelyvaihe: CENin lausuntokierros Cosmetics. Analytical methods. GC/MS method for the identification and assay of 12 phthalates in cosmetic samples ready for analytical injection Sivuja/Pages: 21 Kansallinen lausuntoaika päättyy: 2013-04-22 Vastuuhenkilö: Tuula Rantalaiho LP 2013025 FprEN 16344 Cosmetics. Analysis of cosmetic products. Screening for UV-filters in cosmetic products and quantitative determination of 10 UV-filters by HPLC. Sivuja/Pages: 26 Kansallinen lausuntoaika päättyy: 2013-04-15 Vastuuhenkilö: Tuula Rantalaiho 2
KEMESTA ry Kansainväliset lausuntopyynnöt Tässä raportissa luetellaan kansalliselle lausuntokierrokselle lähetetyt ISOn ehdotukset. Kysymme näiden ehdotusten osalta hyväksyntää ISO-standardeiksi. Lausuntopyynnöt luetellaan komiteakohtaisesti. Luettelo sisältää lausuntopyyntöjä väliltä LP 2013013... LP 2013032 ISO/TC 6/SC 2 Test methods and quality specifications for paper and board LP 2013028 ISO/DIS 12625-7.2 Tissue paper and tissue products -- Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10- (outdoor daylight) Kansallinen lausuntoaika päättyy: 2013-04-22 Vastuuhenkilö: Alina Ruonala-Lindgren ISO/TC 61/SC 2 Mechanical properties LP 2013021 ISO/DIS 11403-1 Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1: Mechanical properties Sivuja/Pages: 12 Kansallinen lausuntoaika päättyy: 2013-04-08 Vastuuhenkilö: Tuula Rantalaiho ISO/TC 61/SC 5 Physical-chemical properties LP 2013022 ISO/DIS 17221 Plastics -- Determination of image clarity (degree of sharpness of reflected or transmitted image) Kansallinen lausuntoaika päättyy: 2013-04-08 Vastuuhenkilö: Tuula Rantalaiho LP 2013029 ISO/DIS 11359-1 Plastics -- Thermomechanical analysis (TMA) -- Part 1: General principles Kansallinen lausuntoaika päättyy: 2013-04-22 Vastuuhenkilö: Tuula Rantalaiho 3
Liikennevirasto Eurooppalaiset lausuntopyynnöt Tässä raportissa luetellaan kansalliselle lausuntokierrokselle lähetetyt CENin (ml. ECISS) ehdotukset sekä CENin ja ISOn yhteiset ehdotukset. Kysymme näiden ehdotusten osalta hyväksyntää EN-standardeiksi sekä CENin ja ISOn yhteisten ehdotusten osalta myös hyväksyntää ISO-standardeiksi. Kaikki hyväksytyiksi tulleet EN-standardit on vahvistettava kansallisiksi SFS-standardeiksi. Lausuntopyynnöt luetellaan komiteakohtaisesti. Luettelo sisältää lausuntopyyntöjä väliltä LP 2013001... LP 2013004 CEN/TC 226 Road equipment LP 2013001 pren 14389-1 Käsittelyvaihe: CENin lausuntokierros Road traffic noise reducing devices. Procedures for assessing long term performance. Part 1: Acoustical elements Sivuja/Pages: 15 Kansallinen lausuntoaika päättyy: 2013-07-01 Vastuuhenkilö: Sami Petäjä LP 2013002 pren 14389-2 Käsittelyvaihe: CENin lausuntokierros Road traffic noise reducing devices. Procedures for assessing long term performance. Part 2: Non-acoustical characteristics Sivuja/Pages: 14 Kansallinen lausuntoaika päättyy: 2013-07-01 Vastuuhenkilö: Sami Petäjä CEN/TC 250/SC 7 Eurocode 7 - Geotechnical design LP 2013004 EN 1997-1:2004/FprA1 Eurocode 7: Geotechnical design. Part 1: General rules Sivuja/Pages: 17 89/106/EEC Construction products Käsittelyvaihe: CENin UAP-kysely Vastuuhenkilö: Pentti Salo CEN/TC 288 Execution of special geotechnical works LP 2013003 FprEN 1537 Execution of special geotechnical work. Ground anchors Sivuja/Pages: 49 Korvaa standardin SFS-EN 1537:en Vastuuhenkilö: Pentti Salo 4
METSTA ry Eurooppalaiset lausuntopyynnöt Tässä raportissa luetellaan kansalliselle lausuntokierrokselle lähetetyt CENin (ml. ECISS) ehdotukset sekä CENin ja ISOn yhteiset ehdotukset. Kysymme näiden ehdotusten osalta hyväksyntää EN-standardeiksi sekä CENin ja ISOn yhteisten ehdotusten osalta myös hyväksyntää ISO-standardeiksi. Kaikki hyväksytyiksi tulleet EN-standardit on vahvistettava kansallisiksi SFS-standardeiksi. Lausuntopyynnöt luetellaan komiteakohtaisesti. Luettelo sisältää lausuntopyyntöjä väliltä LP 2013051... LP 2013126 CEN/SS F01 Technical drawings LP 2013077 pren ISO 10628-1 Diagrams for the chemical and petrochemical industry. Part 1: Specification of diagrams (ISO/DIS 10628-1:2013) Kansallinen lausuntoaika päättyy: 2013-06-15 Vastuuhenkilö: Jukka-Pekka Rapinoja CEN/SS M11 Powder metallurgy LP 2013074 FprEN ISO 3326 rev Hardmetals. Determination of (the magnetization) coercivity Kansallinen lausuntoaika päättyy: 2013-05-07 Käsittelyvaihe: CENin ja ISOn rinnakkaisäänestys Vastuuhenkilö: Ville Rantanen CEN/SS T01 Shipbuilding and maritime structures LP 2013075 pren ISO 6185-3 Inflatable boats. Part 3: Boats with a maximum motor power rating of 15 kw and greater (ISO/DIS 6185-3:2013) Ilmatäytteiset veneet. Osa 3: Veneet moottorilla, jonka teho on yli 15 kw Korvaa standardin SFS-EN ISO 6185-3:en 2003/44/EC Approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft 94/25/EC Recreational craft Kansallinen lausuntoaika päättyy: 2013-07-01 Vastuuhenkilö: Lauri Elers 5
LP 2013085 FprEN ISO 7840 Käsittelyvaihe: CENin ja ISOn rinnakkaisäänestys Small craft. Fire-resistant fuel hoses (ISO/FDIS 7840:2013) Veneet. Palonkestävät polttoaineletkut Korvaa standardin SFS-EN ISO 7840:en 2003/44/EC Approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft 94/25/EC Recreational craft Kansallinen lausuntoaika päättyy: 2013-05-01 Vastuuhenkilö: Lauri Elers LP 2013086 FprEN ISO 8469 Käsittelyvaihe: CENin ja ISOn rinnakkaisäänestys Small craft. Non-fire-resistant fuel hoses (ISO/FDIS 8469:2013) Veneet. Ei-palonkestävät polttoaineletkut Korvaa standardin SFS-EN ISO 8469:en 2003/44/EC Approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft 94/25/EC Recreational craft Kansallinen lausuntoaika päättyy: 2013-05-01 Vastuuhenkilö: Lauri Elers LP 2013087 FprEN ISO 10088 Käsittelyvaihe: CENin ja ISOn rinnakkaisäänestys Small craft. Permanently installed fuel systems (ISO/FDIS 10088:2013) Veneet. Kiinteästi asennetut polttoainejärjestelmät Korvaa standardin SFS-EN ISO 10088 2003/44/EC Approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft 94/25/EC Recreational craft Kansallinen lausuntoaika päättyy: 2013-05-01 Vastuuhenkilö: Lauri Elers CEN/TC 10 Lifts, escalators and moving walks LP 2013104 FprEN 12016 Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Immunity Sähkömagneettinen yhteensopivuus. Tuoteperhestandardi hisseille, liukuportaille ja liukukäytäville. Häiriönsieto Sivuja/Pages: 23 Korvaa standardin SFS-EN 12016+A1 2004/108/EC 2006/42/EC 95/16/EC Kansallinen lausuntoaika päättyy: 2013-05-15 Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) Lifts Vastuuhenkilö: Lauri Elers 6
CEN/TC 113 Heat pumps and air conditioning units LP 2013088 FprEN 12900 Refrigerant compressors. Rating conditions, tolerances and presentation of manufacturer''s performance data Kylmäainekompressorit. Luokitusolosuhteet, toleranssit ja valmistajan suorituskykyä koskevat tiedot Sivuja/Pages: 14 Korvaa standardin SFS-EN 12900:en 206/2012 Commission Regulation (EU) No 206/2012 of 6 March 2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for air conditioners and comfort fans Kansallinen lausuntoaika päättyy: 2013-04-30 Vastuuhenkilö: Ville Rantanen CEN/TC 121 Welding LP 2013106 pren ISO 5826 Resistance welding equipment. Transformers. General specifications applicable to all transformers (ISO/DIS 5826:2013) Korvaa standardin SFS-EN ISO 5826:en Kansallinen lausuntoaika päättyy: 2013-05-02 Vastuuhenkilö: Carl-Gustaf Lindewald CEN/TC 130 Space heating appliances without integral heat sources LP 2013112 FprEN 14037-5 Free hanging heating and cooling surfaces for water with a temperature below 120 C. Part 5: Test method for thermal output of open or closed heated ceiling surfaces Sivuja/Pages: 18 Kansallinen lausuntoaika päättyy: 2013-04-25 Vastuuhenkilö: Kimmo Konkarikoski LP 2013113 FprEN 14037-3 Free hanging heating and cooling surfaces for water with a temperature below 120 C. Part 3: Rating method and evaluation of radiant thermal output of ceiling mounted radiant panels Sivuja/Pages: 8 Korvaa standardin SFS-EN 14037-3:2003 Kansallinen lausuntoaika päättyy: 2013-04-25 Vastuuhenkilö: Kimmo Konkarikoski LP 2013114 FprEN 14037-2 Free hanging heating and cooling surfaces for water with a temperature below 120 C. Part 2: Test method for thermal output of ceiling mounted radiant panels 5 Korvaa standardin SFS-EN 14037-2:2003 Kansallinen lausuntoaika päättyy: 2013-04-25 Vastuuhenkilö: Kimmo Konkarikoski 7
LP 2013115 FprEN 14037-4 Free hanging heating and cooling surfaces for water with a temperature below 120 C. Part 4: Test method for cooling capacity of ceiling mounted radiant panels Sivuja/Pages: 14 Kansallinen lausuntoaika päättyy: 2013-04-25 Vastuuhenkilö: Kimmo Konkarikoski CEN/TC 132 Aluminium and aluminium alloys LP 2013062 pren 573-3 rev Käsittelyvaihe: CENin UAP-kysely Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 3: Chemical composition and form of products 6 Korvaa standardin SFS-EN 573-3 Kansallinen lausuntoaika päättyy: 2013-05-31 LP 2013063 FprEN 485-2 Käsittelyvaihe: CENin UAP-kysely Aluminium and aluminium alloys. Sheet, strip and plate. Part 2: Mechanical properties Sivuja/Pages: 87 Korvaa standardin SFS-EN 485-2 Kansallinen lausuntoaika päättyy: 2013-05-31 LP 2013064 FprEN 754-2 Käsittelyvaihe: CENin UAP-kysely Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Part 2: Mechanical properties Sivuja/Pages: 45 Korvaa standardin SFS-EN 754-2 Kansallinen lausuntoaika päättyy: 2013-05-31 LP 2013065 FprEN 755-2 Käsittelyvaihe: CENin UAP-kysely Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 2: Mechanical properties Sivuja/Pages: 66 Korvaa standardin SFS-EN 755-2 Kansallinen lausuntoaika päättyy: 2013-05-31 LP 2013066 FprEN 13195 Käsittelyvaihe: CENin UAP-kysely Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) Sivuja/Pages: 20 Korvaa standardin SFS-EN 13195 Kansallinen lausuntoaika päättyy: 2013-05-31 8
CEN/TC 150 Industrial Trucks - Safety LP 2013068 pren 12895 Käsittelyvaihe: CENin lausuntokierros Industrial trucks. Electromagnetic compatibility Trukit. Sähkömagneettinen yhteensopivuus Sivuja/Pages: 17 Korvaa standardin SFS-EN 12895 2004/108/EC Directive 89/336/EEC Kansallinen lausuntoaika päättyy: 2013-07-07 LP 2013105 Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Vastuuhenkilö: Ville Rantanen pren 1755 Käsittelyvaihe: CENin lausuntokierros Safety of industrial trucks. Operation in potentially explosive atmospheres. Use in flammable gas, vapour, mist and dust Trukkien turvallisuus. Käyttötoiminta räjähdysvaarallisissa tiloissa. Käyttö palavassa kaasussa, höyryssä, sumussa ja pölyssä Sivuja/Pages: 53 Korvaa standardin SFS-EN 1755 + A1:en 2006/42/EC Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) 94/9/EC Equipment and protective systems intended for use in potentially explosive atmospheres (ATEX) Kansallinen lausuntoaika päättyy: 2013-08-07 Vastuuhenkilö: Ville Rantanen CEN/TC 156 Ventilation for buildings LP 2013097 pren 13141-6 Käsittelyvaihe: CENin lausuntokierros Ventilation for buildings. Performance testing of components/products for residential ventilation. Part 6: Exhaust ventilation system packages used in a single dwelling Sivuja/Pages: 25 Korvaa standardin SFS-EN 13141-6:en Kansallinen lausuntoaika päättyy: 2013-05-01 Vastuuhenkilö: Kimmo Konkarikoski LP 2013098 pren 13141-11 Käsittelyvaihe: CENin lausuntokierros Ventilation for buildings. Performance testing of components/products for residential ventilation. Part 11: Positive pressure ventilation systems Sivuja/Pages: 23 Kansallinen lausuntoaika päättyy: 2013-05-01 Vastuuhenkilö: Kimmo Konkarikoski 9
CEN/TC 231 Mechanical vibration and shock LP 2013108 FprEN ISO 10819 Käsittelyvaihe: CENin ja ISOn rinnakkaisäänestys Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO/FDIS 10819:2013) Mekaaninen värähtely ja isku. Käsitärinä. Käsineiden kautta kämmeniin kohdistuvan tärinän mittaus- ja arviointimenetelmä Korvaa standardin SFS-EN ISO 10819:1997 89/686/EEC Personal protective equipment (PPE) Kansallinen lausuntoaika päättyy: 2013-04-25 Vastuuhenkilö: Kimmo Konkarikoski CEN/TC 232 Compressors, vacuum pumps and their systems LP 2013084 FprEN 1012-3 Käsittelyvaihe: CENin UAP-kysely Compressors and vaccum pumps. Safety requirements. Part 3: Process compressors Kompressorit ja tyhjöpumput. Turvallisuusvaatimukset. Osa 3: Prosessikompressorit Sivuja/Pages: 103 2006/42/EC Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) Kansallinen lausuntoaika päättyy: 2013-08-01 Vastuuhenkilö: Lauri Elers CEN/TC 242 Safety requirements for passenger transportation by rope LP 2013116 pren 13107 Käsittelyvaihe: CENin lausuntokierros Safety requirements for cableway installations designed to carry persons. Civil engineering works Sivuja/Pages: 62 Korvaa standardin SFS-EN 13107:en 2000/9/EC Cableway installations designed to carry persons Kansallinen lausuntoaika päättyy: 2013-05-27 Vastuuhenkilö: Carl-Gustaf Lindewald LP 2013117 pren 1709 Käsittelyvaihe: CENin lausuntokierros Safety requirements for cableway installations designed to carry persons. Precommissioning inspection, maintenance, operational inspection and checks Henkilökuljetukseen tarkoitetut köysiradat. Turvallisuusvaatimukset. Ennen käyttöönottoa tehtävä tarkastus, kunnossapito ja käyttötarkastukset Sivuja/Pages: --- Korvaa standardin SFS-EN 1709 2000/9/EC Cableway installations designed to carry persons Kansallinen lausuntoaika päättyy: 2013-05-27 Vastuuhenkilö: Carl-Gustaf Lindewald 10
LP 2013118 pren 1908 Käsittelyvaihe: CENin lausuntokierros Safety requirements of cableway installations designed to carry persons. Tensioning devices Henkilökuljetukseen tarkoitetut köysiradat. Turvallisuusvaatimukset. Kiristyslaitteet Sivuja/Pages: --- Korvaa standardin SFS-EN 1908 2000/9/EC Cableway installations designed to carry persons Kansallinen lausuntoaika päättyy: 2013-05-27 Vastuuhenkilö: Carl-Gustaf Lindewald LP 2013119 pren 12929-1 Käsittelyvaihe: CENin lausuntokierros Safety requirements for cableway installations designed to carry persons. General requirements. Part 1: Requirements for all installations Henkilökuljetukseen tarkoitetut köysiradat. Turvallisuusvaatimukset. Yleiset ohjeet. Osa 1: Kaikkia laitteita koskevat vaatimukset Sivuja/Pages: --- Korvaa standardin SFS-EN 12929-1 2000/9/EC Cableway installations designed to carry persons Kansallinen lausuntoaika päättyy: 2013-05-27 Vastuuhenkilö: Carl-Gustaf Lindewald LP 2013120 pren 12929-2 Käsittelyvaihe: CENin lausuntokierros Safety requirements for cableway installations designed to carry persons. General requirements. Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes Sivuja/Pages: --- Korvaa standardin SFS-EN 12929-2:en 2000/9/EC Cableway installations designed to carry persons Kansallinen lausuntoaika päättyy: 2013-05-27 Vastuuhenkilö: Carl-Gustaf Lindewald LP 2013121 pren 12930 Käsittelyvaihe: CENin lausuntokierros Safety requirements for cableway installations designed to carry persons. Calculations Henkilökuljetukseen tarkoitetut köysiradat. Turvallisuusvaatimukset. Laskelmat Sivuja/Pages: --- Korvaa standardin SFS-EN 12930 2000/9/EC Cableway installations designed to carry persons Kansallinen lausuntoaika päättyy: 2013-05-27 Vastuuhenkilö: Carl-Gustaf Lindewald LP 2013122 pren 13223 Käsittelyvaihe: CENin lausuntokierros Safety requirements for cableway installations designed to carry persons. Drive systems and other mechanical equipment Henkilökuljetukseen tarkoitetut köysiradat. Turvallisuusvaatimukset. Käyttökoneistot ja muut mekaaniset laitteet Sivuja/Pages: --- Korvaa standardin SFS-EN 13223 2000/9/EC Cableway installations designed to carry persons Kansallinen lausuntoaika päättyy: 2013-05-27 Vastuuhenkilö: Carl-Gustaf Lindewald 11
LP 2013123 pren 13243 Käsittelyvaihe: CENin lausuntokierros Safety requirements for cableway installations designed to carry persons. Electrical equipment other than for drive systems Henkilökuljetukseen tarkoitetut köysiradat. Turvallisuusvaatimukset. Sähkölaitteet käyttökoneistojen sähkölaitteita lukuun ottamatta Sivuja/Pages: --- Korvaa standardin SFS-EN 13243 2000/9/EC Cableway installations designed to carry persons Kansallinen lausuntoaika päättyy: 2013-05-27 Vastuuhenkilö: Carl-Gustaf Lindewald LP 2013124 pren 12927 Käsittelyvaihe: CENin lausuntokierros Safety requirements for cableway installations designed to carry persons. Ropes Henkilökuljetukseen tarkoitetut köysiradat. Turvallisuusvaatimukset. Köydet Sivuja/Pages: 65 Korvaa standardin SFS-EN 12927-1:en,SFS-EN 12927-2:en,SFS-EN 12927-3:en,SFS-EN 12927-4:en,SFS-EN 12927-5:en,SFS-EN 12927-6,SFS-EN 12927-7,SFS-EN 12927-8 2000/9/EC Cableway installations designed to carry persons Kansallinen lausuntoaika päättyy: 2013-05-27 Vastuuhenkilö: Carl-Gustaf Lindewald CEN/TC 69 Industrial valves LP 2013067 pren ISO 4126-6 Safety devices for protection against excessive pressure. Part 6: Application, selection and installation of bursting disc safety devices (ISO/DIS 4126-6:2013) Korvaa standardin SFS-EN ISO 4126-6:en Kansallinen lausuntoaika päättyy: 2013-06-30 LP 2013083 FprEN 13547 Industrial valves. Copper alloy ball valves Teollisuusventtiilit. Kupariseoksiset palloventtiilit Sivuja/Pages: 25 97/23/EC Pressure equipment Kansallinen lausuntoaika päättyy: 2013-07-14 Vastuuhenkilö: Ville Rantanen Käsittelyvaihe: CENin UAP-kysely Korvaa standardin CEN/TS 13547:en Vastuuhenkilö: Ville Rantanen CEN/TC 74 Flanges and their joints LP 2013107 FprEN 1591-4 Flanges and their joints. Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems Sivuja/Pages: 15 Korvaa standardin CEN/TS 1591-4:en Kansallinen lausuntoaika päättyy: 2013-05-07 Vastuuhenkilö: Ville Rantanen 12
ECISS/TC 101 Test methods for steel (other than chemical analysis) LP 2013089 pren ISO 6506-1 Metallic materials. Brinell hardness test. Part 1: Test method (ISO/DIS 6506-1:2013) Metallien Brinellin kovuuskoe. Osa 1: Menetelmä Korvaa standardin SFS-EN ISO 6506-1 Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013090 pren ISO 6506-2 Metallic materials. Brinell hardness test. Part 2: Verification and calibration of testing machines (ISO/DIS 6506-2:2013) Metallien Brinellin kovuuskoe. Osa 2: Kovuusmittareiden varmentaminen ja kalibrointi Korvaa standardin SFS-EN ISO 6506-2 Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013091 pren ISO 6506-3 Metallic materials. Brinell hardness test. Part 3: Calibration of reference blocks (ISO/DIS 6506-3:2013) Metallien Brinellin kovuuskoe. Osa 3: Vertailukovuuspalojen kalibrointi Korvaa standardin SFS-EN ISO 6506-3:en Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013092 pren ISO 6506-4 Metallic materials. Brinell hardness test. Part 4: Table of hardness values (ISO/DIS 6506-4:2013) Metallien Brinellin kovuuskoe. Osa 4: Kovuusarvojen taulukko Korvaa standardin SFS-EN ISO 6506-4 Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013093 pren ISO 16859-1 Metallic materials. Leeb hardness test. Part 1: Test method (ISO/DIS 16859-1:2013) Metallien Leebin kovuuskoe. Osa 1: Menetelmä Kansallinen lausuntoaika päättyy: 2013-06-28 13
LP 2013094 pren ISO 16859-2 Metallic materials. Leeb hardness test. Part 2: Verification and calibration of the testing devices (ISO/DIS 16859-2:2013) Metallien Leebin kovuuskoe. Osa 2: Kovuusmittareiden varmentaminen ja kalibrointi Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013095 pren ISO 16859-3 Metallic materials. Leeb hardness test. Part 3: Calibration of reference test blocks (ISO/DIS 16859-3:2013) Metallien Leebin kovuuskoe. Osa 3: Vertailukovuuspalojen kalibrointi Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013099 pren ISO 6508-1 Metallic materials. Rockwell hardness test. Part 1: Test method (ISO/DIS 6508-1:2013) Metallien Rockwellin kovuuskoe. Osa 1: Menetelmä Korvaa standardin SFS-EN ISO 6508-1 Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013100 pren ISO 6508-2 Metallic materials. Rockwell hardness test. Part 2: Verification and calibration of testing machines and indenters (ISO/DIS 6508-2:2013) Metallien Rockwellin kovuuskoe. Osa 2: Kovuusmittareiden sekä painimien varmentaminen ja kalibrointi Korvaa standardin SFS-EN ISO 6508-2 Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013101 pren ISO 6508-3 Metallic materials. Rockwell hardness test. Part 3: Calibration of reference blocks (ISO/DIS 6508-3:2013) Metallien Rockwellin kovuuskoe. Osa 3: Vertailukovuuspalojen kalibrointi Korvaa standardin SFS-EN ISO 6508-3:en Kansallinen lausuntoaika päättyy: 2013-06-28 ECISS/TC 109 Coated and uncoated flat products to be used for cold forming LP 2013081 FprEN 10049 Käsittelyvaihe: CENin UAP-kysely Measurement of roughness average Ra and peak count RPc on metallic flat products Sivuja/Pages: 12 Korvaa standardin SFS-EN 10049:en Kansallinen lausuntoaika päättyy: 2013-06-14 14
METSTA ry Kansainväliset lausuntopyynnöt Tässä raportissa luetellaan kansalliselle lausuntokierrokselle lähetetyt ISOn ehdotukset. Kysymme näiden ehdotusten osalta hyväksyntää ISO-standardeiksi. Lausuntopyynnöt luetellaan komiteakohtaisesti. Luettelo sisältää lausuntopyyntöjä väliltä LP 2013051... LP 2013126 ISO/TC 108/SC 4 Human exposure to mechanical vibration and shock LP 2013108 ISO/FDIS 10819 Käsittelyvaihe: ISOn lopullinen äänestys Mechanical vibration and shock -- Hand-arm vibration -- Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand Sivuja/Pages: 26 Kansallinen lausuntoaika päättyy: 2013-04-25 Vastuuhenkilö: Kimmo Konkarikoski ISO/TC 164/SC 3 Hardness testing LP 2013089 ISO/DIS 6506-1 Metallic materials -- Brinell hardness test -- Part 1: Test method Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013090 ISO/DIS 6506-2 Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013091 ISO/DIS 6506-3 Metallic materials -- Brinell hardness test -- Part 3: Calibration of reference blocks Kansallinen lausuntoaika päättyy: 2013-06-28 15
LP 2013092 ISO/DIS 6506-4 Metallic materials -- Brinell hardness test -- Part 4: Table of hardness values Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013093 ISO/DIS 16859-1 Metallic materials -- Leeb hardness test -- Part 1: Test method Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013094 ISO/DIS 16859-2 Metallic materials -- Leeb hardness test -- Part 2: Verification and calibration of the testing devices Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013095 ISO/DIS 16859-3 Metallic materials -- Leeb hardness test -- Part 3: Calibration of reference test blocks Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013099 ISO/DIS 6508-1 Metallic materials -- Rockwell hardness test -- Part 1: Test method Kansallinen lausuntoaika päättyy: 2013-06-28 LP 2013100 ISO/DIS 6508-2 Metallic materials -- Rockwell hardness test -- Part 2: Verification and calibration of testing machines and indenters Kansallinen lausuntoaika päättyy: 2013-06-28 16
LP 2013101 ISO/DIS 6508-3 Metallic materials -- Rockwell hardness test -- Part 3: Calibration of reference blocks Kansallinen lausuntoaika päättyy: 2013-06-28 ISO/TC 188 Small craft LP 2013075 ISO/DIS 6185-3 Inflatable boats -- Part 3: Boats with a maximum motor power rating of 15 kw and greater Kansallinen lausuntoaika päättyy: 2013-07-01 Vastuuhenkilö: Lauri Elers LP 2013085 ISO/FDIS 7840 Small craft -- Fire-resistant fuel hoses Käsittelyvaihe: ISOn lopullinen äänestys Sivuja/Pages: 11 Kansallinen lausuntoaika päättyy: 2013-05-01 Vastuuhenkilö: Lauri Elers LP 2013086 ISO/FDIS 8469 Small craft -- Non-fire-resistant fuel hoses Käsittelyvaihe: ISOn lopullinen äänestys Sivuja/Pages: 9 Kansallinen lausuntoaika päättyy: 2013-05-01 Vastuuhenkilö: Lauri Elers LP 2013087 ISO/FDIS 10088 Small craft -- Permanently installed fuel systems Käsittelyvaihe: ISOn lopullinen äänestys Sivuja/Pages: 11 Kansallinen lausuntoaika päättyy: 2013-05-01 Vastuuhenkilö: Lauri Elers 17
ISO/TC 85/SC 2 Radiation protection LP 2013082 ISO/FDIS 15690 Käsittelyvaihe: ISOn lopullinen äänestys Radiological protection -- Recommendations for dealing with discrepancies between personal dosimeter systems used in parallel Sivuja/Pages: 11 Kansallinen lausuntoaika päättyy: 2013-04-07 Vastuuhenkilö: Ville Rantanen LP 2013102 ISO/FDIS 13304-1 Käsittelyvaihe: ISOn lopullinen äänestys Radiological protection -- Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation -- Part 1: General principles Sivuja/Pages: 18 Kansallinen lausuntoaika päättyy: 2013-05-02 Vastuuhenkilö: Ville Rantanen 18
METSTA ry Kansalliset lausuntopyynnöt Tässä raportissa luetellaan kansalliselle lausuntokierrokselle lähetetyt laatimamme SFS-standardiehdotukset sekä sellaiset ISOn ehdotukset, joille kysymme hyväksyntää kansallisiksi SFS-ISO -standardeiksi (sekä myös hyväksyntää ISO-standardeiksi, jos kyseessä on DIS- tai FDIS-versio). Lausuntopyynnöt luetellaan LP-tunnusnumeron mukaisessa järjestyksessä. Luettelo sisältää lausuntopyyntöjä väliltä LP 2013051... LP 2013126 LP MET-2013096 ISO/FDIS 20032 Metallisten superplastisten materiaalien lujuusominaisuuksien arviointimenetelmä Method for evaluation of tensile properties of metallic superplastic materials Sivuja/Pages: 11 Komitea ISO/TC 164/SC 2 Ductility testing Kansallinen lausuntoaika päättyy: 2013-04-26 Korvaa standardin LP MET-2013103 E292 Hissityöturvallisuus Safe working on lifts 8 Korvaa standardin SFS 5880 Kansallinen lausuntoaika päättyy: 2013-05-22 Vastuuhenkilö: Lauri Elers LP MET-2013125 ISO/FDIS 12110-1 Metallien väsytyskokeet. Vaihtuva-amplitudiset väsytyskokeet. Osa 1: Yleisperiaatteet, koemenetelmä ja raportointivaatimukset Metallic materials -- Fatigue testing -- Variable amplitude fatigue testing -- Part 1: General principles, test method and reporting requirements Sivuja/Pages: --- Korvaa standardin Komitea ISO/TC 164/SC 5 Fatigue testing Kansallinen lausuntoaika päättyy: 2013-05-17 LP MET-2013126 ISO/FDIS 12110-2 Metallien väsytyskokeet. Vaihtuva-amplitudiset väsytyskokeet. Osa 2: Jännitysjaksojen laskenta ja tietojen yksinkertaistaminen Metallic materials -- Fatigue testing -- Variable amplitude fatigue testing -- Part 2: Cycle counting and related data reduction methods Sivuja/Pages: --- Korvaa standardin Komitea ISO/TC 164/SC 5 Fatigue testing Kansallinen lausuntoaika päättyy: 2013-05-17 19
Muoviteollisuus ry Kansainväliset lausuntopyynnöt Tässä raportissa luetellaan kansalliselle lausuntokierrokselle lähetetyt ISOn ehdotukset. Kysymme näiden ehdotusten osalta hyväksyntää ISO-standardeiksi. Lausuntopyynnöt luetellaan komiteakohtaisesti. Luettelo sisältää lausuntopyyntöjä väliltä LP 2013007... LP 2013007 ISO/TC 138/SC 2 Plastics pipes and fittings for water supplies LP 2013007 ISO/DIS 16422.2 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications Kansallinen lausuntoaika päättyy: 2013-04-16 Vastuuhenkilö: Rasmus Pinomaa 20