Luetteloliite. Uudet SFS-standardit Uudet CENin julkaisut WTO-tiedotuskeskus SUOMEN STANDARDISOIMISLIITTO SFS RY STELLATUM OY

Transkriptio

1 Luetteloliite Uudet SFS-standardit Uudet CENin julkaisut WTO-tiedotuskeskus SUOMEN STANDARDISOIMISLIITTO SFS RY STELLATUM OY

2 Uudet SFS-standardit Tällä palstalla luetellaan uudet SFS-standardit SFS-ICS-ryhmittäin. Merkintä /A1 tunnuksen lopussa tarkoittaa, että kyseessä on lisäys A1 alkuperäiseen standardiin. Merkintä +A1 tunnuksen lopussa tarkoittaa, että standardi sisältää muutoksen A 1. Standardin tunnuksen jälkeen on mainittu vahvistuspäivä. Standardit, jotka uusi standardi korvaa, on mainittu kunkin uuden standardin tiedoissa. Standardeja myy SFS-standardisoinnin asiakaspalvelu, puh (vaihde). Niitä voi ladata omalle koneelleen SFS:n verkkokaupasta www. sales.sfs.fi. Sähköiset englanninkieliset versiot ovat saatavissa noin kahden viikon sisällä vahvistuspäivästä. Suomennokset ovat yleensä saatavissa 1 2 kuukauden kuluttua vahvistuspäivästä, joskus aikaa voi mennä paljonkin enemmän Osa standardeista liittyy CE-merkintää edellyttäviin uuden lähestymistavan direktiiveihin Ympäristön ja terveydensuojelu. Turvallisuus (Sanastot) SFS-EN 14799:en, Air filters for general air cleaning. Terminology Putkistot, säiliöt, venttiilit, pumput. Hydrauliikka (Sanastot) SFS-EN 14799:en, Air filters for general air cleaning. Terminology Kemiantekniikka (Sanastot) SFS-EN ISO 9235:en, Aromatic natural raw materials. Vocabulary (ISO 9235:2013) Massa- ja paperiteollisuus (Sanastot) SFS-EN 643:en, Paper and board. European list of standard grades of paper and board for recycling SFS-EN 643:2002 SFS-EN 643:en: Rakennusmateriaalit ja rakentaminen (Sanastot) SFS-EN 13707:en, Vedeneristyskermit. Kattojen bitumiset vedeneristyskermit. Määritelmät ja ominaisuudet Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics SFS-EN A2:en:2009 SFS-EN A2:en:2009 SFS-EN 14076:en, Timber stairs. Terminology SFS-EN 14076:en: Värikoodaus SFS-EN ISO 7010/A1:en, Graphical symbols. Safety colours and safety signs. Registered safety signs (ISO 7010:2011/ Amd 1:2012) SFS-EN ISO 7010/A2:en, Graphical symbols. Safety colours and safety signs. Registered safety signs (ISO 7010:2011/ Amd 2:2012) SFS-EN ISO 7010/A3:en, Graphical symbols. Safety colours and safety signs. Registered safety signs (ISO 7010:2011/ Amd 3:2012) Yleisesti käytettävät kuvatunnukset ja piirrosmerkit SFS-EN ISO 7010/A1:en, Graphical symbols. Safety colours and safety signs. Registered safety signs (ISO 7010:2011/ Amd 1:2012) SFS-EN ISO 7010/A2:en, Graphical symbols. Safety colours and safety signs. Registered safety signs (ISO 7010:2011/ Amd 2:2012) SFS-EN ISO 7010/A3:en, Graphical symbols. Safety colours and safety signs. Registered safety signs (ISO 7010:2011/ Amd 3:2012) Tietyissä laitteissa käytettävät kuvatunnukset ja piirrosmerkit SFS-EN ISO 7010/A1:en, Graphical symbols. Safety colours and safety signs. Registered safety signs (ISO 7010:2011/ Amd 1:2012) SFS-EN ISO 7010/A2:en, Graphical symbols. Safety colours and safety signs. Registered safety signs (ISO 7010:2011/ Amd 2:2012) SFS-EN ISO 7010/A3:en, Graphical symbols. Safety colours and safety signs. Registered safety signs (ISO 7010:2011/ Amd 3:2012) Koneenpiirustus SFS-EN ISO 2553:en, Hitsaus ja niiden lähiprosessit. Merkinnät piirustuksiin Welding and allied processes. Symbolic representation on drawings. Welded joints (ISO 2553:2013) SFS-EN 22553:1994 SFS-EN 22553:en: Yrityksen organisaatio ja johtaminen SFS-EN ISO 8586:en, Sensory analysis. General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors (ISO 8586:2012) SFS-EN ISO :en:2009 SFS-EN ISO/IEC :en, Information technology. Learning, education and training. Metadata for learning resources. Part 3: Basic application profile (ISO/IEC :2011) Laatujohtaminen ja laadunvarmistus SFS-EN A1:en, Healthcare provision by chiropractors SFS-EN 16224:2012 SFS-EN 16224:en: Laki. Hallinto SFS-EN :en, Protection profiles for secure signature creation device. Part 2: Device with key generation SFS-EN :en, Turvallisten allekirjoitusten luomismenetelmien suojausprofiilit. Osa 3: Laitteet, joissa on avaimen tuontimahdollisuus Protection profiles for secure signature creation device. Part 3: Device with key import SFS-EN :en, Turvallisten allekirjoitusten luomismenetelmien suojausprofiilit. Osa 4: Laitteet, jotka luovat avaimet ja joilla on luotettu viestintäyhteys sertifikaatin luomissovelluksen kanssa Protection profiles for secure signature creation device. Part 4: Extension for device with key generation and trusted channel to certificate generation application SFS-EN :en, Turvallisten allekirjoitusten luomismenetelmien suojausprofiilit. Osa 5: Laitteet, jotka luovat avaimet ja joilla on luotettu viestintäyhteys allekirjoituksen luomissovelluksen kanssa Protection profiles for secure signature creation device. Part 5: Extension for device with key generation and trusted channel to signature creation application 2

3 Kuljetus SFS-EN 16495:en, Air Traffic Management. Information security for organisations supporting civil aviation operations SFS-EN ISO :en, Liikenne- ja matkainformaatio (TTI). Liikenne- ja matkainformaatio koodattuina viesteinä. Osa 1: RDS-TMC:n (Radio Data System - Traffic Message Channel) koodausprotokolla. ALERT-C Intelligent transport systems. Traffic and travel information messages via traffic message coding. Part 1: Coding protocol for Radio Data System. Traffic Message Channel (RDS-TMC) using ALERT-C (ISO :2013) SFS-EN ISO AC:en:2003 SFS-EN ISO :en, Liikenne- ja matkainformaatio (TTI). Liikenne- ja matkainformaatio koodattuina viesteinä. Osa 2: RDS-TMC:n (Radio data system. Traffic message channel) tapahtuma- ja tietokoodit Intelligent transport systems. Traffic and travel information messages via traffic message coding. Part 2: Event and information codes for Radio Data System. Traffic Message Channel (RDS-TMC) using ALERT-C (ISO :2013) SFS-EN ISO :en:2003 SFS-EN ISO :en, Liikenne- ja matkainformaatio (TTI). Liikenne- ja matkainformaatio koodattuina viesteinä. Osa 3: Tapahtumien paikantaminen ALERT- C:ssä Intelligent transport systems. Traffic and travel information messages via traffic message coding. Part 3: Location referencing for Radio Data System. Traffic Message Channel (RDS- TMC) using ALERT-C (ISO :2013) SFS-EN ISO :en: Elintarvikemikrobiologia SFS-EN ISO :en, Microbiology of the food chain. Horizontal method for the enumeration of microorganisms. Part 1: Colony count at 30 degrees C by the pour plate technique (ISO :2013) SFS-EN ISO 4833:2003 SFS-EN ISO 4833:en:2003 SFS-EN ISO :en, Microbiology of the food chain. Horizontal method for the enumeration of microorganisms. Part 2: Colony count at 30 degrees C by the surface plating technique (ISO :2013) SFS-EN ISO 4833:2003 SFS-EN ISO 4833:en:2003 SFS-EN ISO 7218/A1:en, Microbiology of food and animal feeding stuffs. General requirements and guidance for microbiological examinations. Amendment 1 (ISO 7218:2007/Amd 1:2013) Muut mikrobiologiaan liittyvät standardit SFS-EN ISO 20743, Tekstiilit. Antibakteerisen tehon määritys Textiles. Determination of antibacterial activity of textile products (ISO 20743:2013) SFS-EN ISO 20743:2007 SFS-EN ISO 20743:en:2007 SFS-EN ISO 20743:en, Tekstiilit. Antibakteerisen tehon määritys Textiles. Determination of antibacterial activity of textile products (ISO 20743:2013) SFS-EN ISO 20743:2007 SFS-EN ISO 20743:en: Lääketiede ja lääkintätilat, yleistä SFS-EN A1:en, Healthcare provision by chiropractors SFS-EN 16224:2012 SFS-EN 16224:en: Lääkinnälliset laitteet SFS-EN :en, Active implantable medical devices. Part 2-2: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators) SFS-EN /A1, Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance SFS-EN , Medical electrical equipment -- Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design SFS-EN ISO :en, Health informatics. Point-of-care medical device communication. Part 10103: Nomenclature. Implantable device, cardiac (ISO/IEEE :2014) SFS-EN ISO 14889:en, Silmälääketieteellinen optiikka. Silmälasien linssit. Leikkaamattomien varastolinssien perusvaatimukset Ophthalmic optics. Spectacle lenses. Fundamental requirements for uncut finished lenses (ISO 14889:2013) SFS-EN ISO 14889:en:2009 SFS-EN ISO 8637:en, Suonensisäiset implantit ja kehon ulkopuoliset järjestelmät. Hemodialyysi-, hemodiafiltraatio-, hemofiltraatio- ja hemokonsentraatiolaitteet Cardiovascular implants and extracorporeal systems. Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators (ISO 8637:2010, including Amendment ) SFS-EN ISO 8638:en, Suonensisäiset implantit ja kehon ulkopuoliset järjestelmät. Kehon ulkopuoliset hemodialyysi-, hemodiafiltraatio- ja hemofiltraatiolaitteet Cardiovascular implants and extracorporeal systems. Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters (ISO 8638:2010) SFS-EN ISO :en, Silmälääketieteellinen optiikka. Leikkaamattomat varastolinssit. Osa 3: Valon läpäisevyyden määritelmät ja testimenetelmät Ophthalmic optics. Uncut finished spectacle lenses. Part 3: Transmittance specifications and test methods (ISO :2013) SFS-EN ISO :en: Hammaslääketiede SFS-EN ISO 17304:en, Hammaslääketiede. Polymeroinnin aiheuttamat kutistumat: Yhdistelmämuovipohjaisten paikkamateriaalien kutistumien määritysmenetelmä Dentistry. Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (ISO 17304:2013) Sterilointi ja desinfektio SFS-EN A1:en, Kemialliset desinfektioaineet ja antiseptiset aineet. Lääketieteen alalla käytetty kvantitatiivinen suspensiotesti bakterisidisen tehon arvioimiseksi. Testimenetelmä ja vaatimukset (vaihe 2/1) Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity in the medical area. Test method and requirements (phase 2, step 1) SFS-EN 13727:en: Ympäristönsuojelu SFS-EN , Medical electrical equipment -- Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design Muut ympäristönsuojeluun liittyvät standardit SFS-EN , Uninterruptible power systems (UPS) -- Part 4: Environmental aspects - Requirements and reporting Jätehuolto SFS-EN A1:en, Stationary waste containers up to l, top lifted and bottom emptied. Part 2: Additional requirements for underground or partly underground systems 3

4 SFS-EN /AC:en:2010 SFS-EN :en: Ilman laatu SFS-EN 13936:en, Workplace exposure. Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour. Requirements and test methods SFS-ENV 13936:en:2001 SFS-EN 14799:en, Air filters for general air cleaning. Terminology SFS-EN :en, Workplace exposure. Measurement of the dustiness of bulk materials. Part 1: Requirements and choice of test methods SFS-EN 15051:en:2006 SFS-EN :en, Workplace exposure. Measurement of the dustiness of bulk materials. Part 2: Rotating drum method SFS-EN 15051:en:2006 SFS-EN :en, Workplace exposure. Measurement of the dustiness of bulk materials. Part 3: Continuous drop method SFS-EN 15051:en:2006 SFS-EN A1:en, Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Part 4: Sampling and analysis of dioxin-like PCBs SFS-EN :en: Veden laatu SFS-EN 15910:en, Veden laatu. Ohje kalojen runsauden määrittämisestä liikkuvilla hydroakustisilla laitteilla Water quality. Guidance on the estimation of fish abundance with mobile hydroacoustic methods SFS-EN ISO 16665:en, Water quality. Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna (ISO 16665:2014) SFS-EN ISO 16665:en: Maaperän laatu. Maaperäoppi SFS-EN ISO 14238:en, Soil quality. Biological methods. Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes (ISO 14238:2012) SFS-EN ISO /A1:en, Geotechnical investigation and testing. Identification and classification of soil. Part 1: Identification and description. Amendment 1 (ISO :2002/Amd 1:2013) SFS-EN ISO /A1:en, Geotechnical investigation and testing. Identification and classification of soil. Part 2: Principles for a classification. Amendment 1 (ISO :2004/Amd 1:2013) SFS-EN ISO 16387:en, Soil quality. Effects of contaminants on Enchytraeidae (Enchytraeus sp.). Determination of effects on reproduction (ISO 16387:2014) SFS-ISO 16387:en:2008 SFS-ISO 12404, Maan laatu. Ohjeistus seulontamenetelmien valinnasta ja soveltamisesta Soil quality -- Guidance on the selection and application of screening methods SFS-ISO 12404:en, Maan laatu. Ohjeistus seulontamenetelmien valinnasta ja soveltamisesta Soil quality -- Guidance on the selection and application of screening methods Koneturvallisuus SFS-EN ISO :en, Koneturvallisuus. Laserkäsittelykoneet. Osa 3: Kohinanvaimennus ja kohinan mittausmenetelmät laserkäsittelykoneille ja kädessä pidettäville laserkäsittelykoneille ja liittyville lisälaitteille (tarkkuusluokka 2) Safety of machinery. Laser processing machines. Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO :2013) Kodin turvallisuus SFS-EN , Household and similar electrical appliances - Safety -- Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation SFS-EN :2010 SFS-EN /A11, Household and similar electrical appliances - Safety -- Part 2-7: Particular requirements for washing machines Ergonomia SFS-EN ISO :en, Valvontakeskusten ergonominen suunnittelu. Osa 4: Työpisteiden tilasuunnittelu ja mitat Ergonomic design of control centres. Part 4: Layout and dimensions of workstations (ISO :2013) SFS-EN ISO :en: Palontorjunta SFS 3357, Palavien nesteiden varaston sammutus- ja palontorjuntakalusto Firefighting and fire prevention equipment for storage of flammable liquids Julkaisukieli: fi SFS 3357:1993 SFS-EN 14043:en, Automaattinen tikasauto pelastustehtäviin. Vaatimukset ja testausmenetelmät High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods SFS-EN A1:2009 SFS-EN A1:en:2009 SFS-EN 14044:en, Puoliautomaattinen tikasauto pelastustehtäviin. Vaatimukset ja testausmenetelmät High rise aerial appliances for fire and rescue service use. Turntable ladders with sequential movements. Safety and performance requirements and test methods SFS-EN A1:2009 SFS-EN A1:en:2009 SFS-EN 16327:en, Palonsammutus. Vaahdotteen ylipaineannostelujärjestelmät (PPPS) ja paineilmavaahdotusjärjestelmät (CAFS) Fire-fighting. Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) Aineiden ja tuotteiden syttyvyys ja palo-ominaisuudet SFS-EN ISO :en, Plastics. Development and use of intermediatescale fire tests for plastics products. Part 1: General guidance (ISO :2014) SFS-EN ISO :en: Rakennusmateriaalien ja -elementtien palonkesto SFS-EN :en, Fire resistance tests for non-loadbearing elements. Part 3: Curtain walling. Full configuration (complete assembly) SFS-EN :en:2007 SFS-EN :en, Fire resistance tests for non-loadbearing elements. Part 4: Curtain walling. Part configuration SFS-EN :en:2007 SFS-EN :en, Extended application of results from fire resistance tests. Non-loadbearing walls. Part 6: Curtain walling SFS-EN :en, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and 4

5 elements of building hardware. Part 1: Fire resistance test for door and shutter assemblies and openable windows SFS-EN :en: Vaarallisilta aineilta suojautuminen SFS 3352, Palavien nesteiden jakeluasema Service station for flammable liquids Julkaisukieli: fi SFS 3352/AC:2011 SFS AC:2010 SFS AC:sv:2010 SFS 3352:sv, Distributionsstation för brännbara vätskor Palavien nesteiden jakeluasema Julkaisukieli: sv SFS AC:sv:2010 SFS 3352/AC:2011 SFS AC:2010 SFS 3355, Palavien nesteiden käsittely satama-alueella Handling of flammable liquids in harbour area. Julkaisukieli: fi SFS 3355:1977 SFS 3355:Sv:1979 SFS-EN 14025, Vaarallisten aineiden kuljetussäiliöt. Paineelliset metallisäiliöt. Suunnittelu ja rakenne Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction SFS-EN 14025:2008 SFS-EN 14025:en:2008 SFS-EN 14025:en, Vaarallisten aineiden kuljetussäiliöt. Paineelliset metallisäiliöt. Suunnittelu ja rakenne Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction SFS-EN 14025:2008 SFS-EN 14025:en:2008 SFS-EN ISO 13274:en, Packaging. Transport packaging for dangerous goods. Plastics compatibility testing for packaging and IBCs (ISO 13274:2013) SFS-EN ISO 16495:en, Packaging. Transport packaging for dangerous goods. Test methods (ISO 16495:2013) Rikosten torjunta SFS-EN 1300:en, Secure storage units. Classification for high security locks according to their resistance to unauthorized opening SFS-EN A1:en: Hälytys- ja varoitusjärjestelmät SFS-EN , Valvonta- ja hälytyskeskus. Osa 1: Sijainti- ja rakennusvaatimukset Monitoring and alarm receiving centre -- Part 1: Location and construction requirements SFS-EN :2010 SFS-EN /AC:2011 SFS-EN , Valvonta- ja hälytyskeskus. Osa 2: Tekniset vaatimukset Monitoring and alarm receiving centre -- Part 2: Technical requirements SFS-EN :2010 SFS-EN /AC:2011 SFS-EN , Valvonta- ja hälytyskeskus. Osa 3: Menettelytavat ja toimintavaatimukset Monitoring and alarm receiving centre -- Part 3: Procedures and requirements for operation SFS-EN : Suojavaatetus SFS-EN :en, Kamppailulajeissa käytettävät suojavarusteet. Osa 3: Lisävaatimukset ja testausmenetelmät vartalon suojaimille Protective equipment for martial arts. Part 3: Additional requirements and test methods for trunk protectors SFS-EN /A1:en:2007 SFS-EN :en:2001 SFS-EN :en, Moottoripyöräilijöiden suoja-asut mekaanista iskua vastaan. Osa 2: Moottoripyöräilijöiden selkäsuojat. Vaatimukset ja testausmenetelmät Motorcyclists protective clothing against mechanical impact. Part 2: Motorcyclists back protectors. Requirements and test methods SFS-EN :en:2004 SFS-EN ISO 13688, Suojavaatetus. Yleiset vaatimukset Protective clothing. General requirements (ISO 13688:2013) SFS-EN 340:2004 SFS-EN 340:en:2004 SFS-EN ISO 13688:en, Suojavaatetus. Yleiset vaatimukset Protective clothing. General requirements (ISO 13688:2013) SFS-EN 340:2004 SFS-EN 340:en: Käsien ja käsivarsien suojaus SFS-EN 374-4:en, Kemikaaleilta ja mikro-organismeilta suojaavat käsineet. Osa 4: Kemiallisen vaurioitumisen määrittäminen Protective gloves against chemicals and microorganisms. Part 4: Determination of resistance to degradation by chemicals Jalkojen ja säärien suojaus SFS-EN ISO AC, Moottorisahan käyttäjän turvajalkine Safety footwear with resistance to chain saw cutting (ISO 17249:2013) SFS-EN ISO 17249/A1:en:2007 SFS-EN ISO 17249:en:2005 SFS-EN ISO 17249:en, Moottorisahan käyttäjän turvajalkine Safety footwear with resistance to chain saw cutting (ISO 17249:2013) SFS-EN ISO 17249/A1:en:2007 SFS-EN ISO 17249:en: Pintojen ominaisuudet SFS-EN ISO :en, Geometrical product specifications (GPS). Surface texture: Areal. Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO :2014) Mittauslaitteet SFS-EN ISO :en, Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). Part 8: CMMs with optical distance sensors (ISO :2013) SFS-EN ISO :en, Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). Part 9: CMMs with multiple probing systems (ISO :2013) SFS-EN ISO :en, Geometrical product specifications (GPS). Surface texture: Areal. Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO :2014) Virtausmittaus SFS-EN ISO 18365:en, Hydrometry. Selection, establishment and operation of a gauging station (ISO 18365:2013) Koneiden ja laitteiden aiheuttama melu SFS-EN ISO :en, Koneturvallisuus. Laserkäsittelykoneet. Osa 3: Kohinanvaimennus ja kohinan mittausmenetelmät laserkäsittelykoneille ja kädessä pidettäville laserkäsittelykoneille ja liittyville lisälaitteille (tarkkuusluokka 2) Safety of machinery. Laser processing machines. Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and as- 5

6 sociated auxiliary equipment (accuracy grade 2) (ISO :2013) SFS-EN ISO 1680:en, Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013) SFS-EN ISO 1680:en: Sähköakustiikka SFS-EN , Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology -- Part 1: General method for one package equipment SFS-EN :en:2000 SFS-EN , Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology -- Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design SFS-EN :en:2004 SFS-EN , Electroacoustics - Sound level meters -- Part 1: Specifications SFS-EN :2003 SFS-EN , Electroacoustics - Sound level meters -- Part 2: Pattern evaluation tests SFS-EN :2004 SFS-EN , Electroacoustics - Sound level meters -- Part 3: Periodic tests SFS-EN : Termodynamiikka ja lämpötilan mittaus SFS-EN , Thermocouples -- Part 1: EMF specifications and tolerances SFS-EN :1996 SFS-EN : Sähkö. Magnetismi. Sähkömittaus ja magneettinen mittaus SFS-EN 50413/A1, Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz GHz) SFS-EN , Superconductivity -- Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies Ympäristötestaus SFS-EN , Expression of performance of gas analyzers -- Part 7: Tuneable semiconductor laser gas analyzers Rikkomaton aineenkoetus SFS-EN :en, Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays. Part 1: Tangential radiographic inspection SFS-EN :en, Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays. Part 2: Double wall radiographic inspection SFS-EN ISO :en, Non-destructive testing. Equipment for eddy current examination. Part 1: Instrument characteristics and verification (ISO :2013) SFS-EN ISO /AC:en:2010 SFS-EN ISO :en:2008 SFS-EN ISO :en, Non-destructive testing. Equipment for eddy current examination. Part 2: Probe characteristics and verification (ISO :2013) SFS-EN ISO :en:2008 SFS-EN ISO :en, Rikkomaton aineenkoetus. Tunkeumanestetarkastus. Osa 2: Tarkastusaineiden testaus Non-destructive testing. Penetrant testing. Part 2: Testing of penetrant materials (ISO :2013) SFS-EN ISO :en:2006 SFS-EN ISO :en, Rikkomaton aineenkoetus. Tunkeumanestetarkastus. Osa 3: Vertailukappaleet Non-destructive testing. Penetrant testing. Part 3: Reference test blocks (ISO :2013) SFS-EN ISO :en: Jouset SFS-EN :en, Cylindrical helical springs made from round wire and bar. Calculation and design. Part 3: Torsion springs SFS-EN :en: Ajoneuvoihin asennetut säiliöt SFS-EN 14025, Vaarallisten aineiden kuljetussäiliöt. Paineelliset metallisäiliöt. Suunnittelu ja rakenne Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction SFS-EN 14025:2008 SFS-EN 14025:en:2008 SFS-EN 14025:en, Vaarallisten aineiden kuljetussäiliöt. Paineelliset metallisäiliöt. Suunnittelu ja rakenne Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction SFS-EN 14025:2008 SFS-EN 14025:en:2008 SFS-EN 14841:en, Nestekaasulaitteet ja -varusteet. Nestekaasun rautatiesäiliövaunujen tyhjennys LPG equipment and accessories. Discharge procedures for LPG rail tankers SFS-EN 14841:en: Painelaitteet SFS-EN 12493:en, Nestekaasulaitteet ja varusteet. Hitsatut teräksiset painesäiliöt nestekaasu säiliöajoneuvoihin. Suunnittelu ja valmistus LPG equipment and accessories. Welded steel pressure vessels for LPG road tankers. Design and manufacture SFS-EN A1:en:2012 SFS-EN /A1:en, Lämmittämättömät painesäiliöt. Osa 1: Yleistä Unfired pressure vessels. Part 1: General SFS-EN /A2:en, Unfired pressure vessels. Part 3: Design Kaasupullot SFS-EN 14894:en, Nestekaasulaitteet ja -varusteet. Nestekaasupullojen ja -astioiden merkinnät LPG equipment and accessories. Cylinder and drum marking SFS-EN 14894:en: Putkistot ja niiden osat, yleistä SFS-EN :en, Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Part 1: Specifications for pipes, fittings and the system SFS-EN :1999 SFS-EN :en:1999 SFS-EN 1594:en, Kaasuputkistot. Maksimikäyttöpaine yli 16 bar. Toiminnalliset vaatimukset Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements SFS-EN 1594:en:2009 6

7 SFS-EN :en, Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays. Part 1: Tangential radiographic inspection SFS-EN :en, Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays. Part 2: Double wall radiographic inspection Rauta- ja teräsputket SFS-EN , toimitusehdot. Osa 1: Seostamattomat teräsputket huoneenlämpötiloihin Technical delivery conditions. Part 1: Non-alloy steel tubes with specified room temperature properties SFS-EN A1:2004 SFS-EN /A1:en:2004 SFS-EN :en:2002 SFS-EN :en, toimitusehdot. Osa 1: Seostamattomat teräsputket huoneenlämpötiloihin Technical delivery conditions. Part 1: Non-alloy steel tubes with specified room temperature properties SFS-EN A1:2004 SFS-EN /A1:en:2004 SFS-EN :en:2002 SFS-EN , toimitusehdot. Osa 2: Kuumalujat seostamattomat ja seostetut teräsputket Technical delivery conditions. Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties SFS-EN A1 + A2:en:2007 SFS-EN A1 + A2:2007 SFS-EN :en, toimitusehdot. Osa 2: Kuumalujat seostamattomat ja seostetut teräsputket Technical delivery conditions. Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties SFS-EN A1 + A2:2007 SFS-EN A1 + A2:en:2007 SFS-EN , toimitusehdot. Osa 3: Seostetut hienoraeteräsputket Technical delivery conditions. Part 3: Alloy fine grain steel tubes SFS-EN A1:2004 SFS-EN /A1:en:2004 SFS-EN :en:2002 SFS-EN :en, toimitusehdot. Osa 3: Seostetut hienoraeteräsputket Technical delivery conditions. Part 3: Alloy fine grain steel tubes SFS-EN :en:2002 SFS-EN A1:2004 SFS-EN /A1:en:2004 SFS-EN , toimitusehdot. Osa 4: Seostamattomat ja seostetut teräsputket mataliin käyttölämpötiloihin Technical delivery conditions. Part 4: Non-alloy and alloy steel tubes with specified low temperature properties SFS-EN A1:2004 SFS-EN /A1:en:2004 SFS-EN :en:2002 SFS-EN :en, toimitusehdot. Osa 4: Seostamattomat ja seostetut teräsputket mataliin käyttölämpötiloihin Technical delivery conditions. Part 4: Non-alloy and alloy steel tubes with specified low temperature properties SFS-EN A1:2004 SFS-EN /A1:en:2004 SFS-EN :en:2002 SFS-EN , toimitusehdot. Osa 5: Ruostumattomat teräsputket Technical delivery conditions. Part 5: Stainless steel tubes SFS-EN :2005 SFS-EN /AC:en:2008 SFS-EN :en:2005 SFS-EN :en, toimitusehdot. Osa 5: Ruostumattomat teräsputket Technical delivery conditions. Part 5: Stainless steel tubes SFS-EN :2005 SFS-EN /AC:en:2008 SFS-EN :en:2005 SFS-EN 10357:en, Austeniittiset, austeniittis-ferriittiset ja ferriittiset pituussaumahitsatut ruostumattomat teräsputket elintarvike- ja kemianteollisuuteen Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry SFS-EN :en, Ruostumattomat pituushitsatut muhvilliset putket ja putken osat viemärijärjestelmiin. Osa 4: Komponentit tyhjöpoistojärjestelmiin ja laivojen viemärijärjestelmiin Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems. Part 4: Components for vacuum drainage systems and for drainage systems on ships SFS-EN :en: Muoviputket SFS-EN A1:en, Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Part 2: Pipes SFS-EN :2012 SFS-EN /AC:2013 SFS-EN :en: Metalliset putkiyhteet SFS-EN :en, Ruostumattomat pituushitsatut muhvilliset putket ja putken osat viemärijärjestelmiin. Osa 4: Komponentit tyhjöpoistojärjestelmiin ja laivojen viemärijärjestelmiin Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems. Part 4: Components for vacuum drainage systems and for drainage systems on ships SFS-EN :en: Laipat, liittimet ja muut putkiliitokset SFS-EN :en, Laipat ja niiden yhteet. Pyöreiden tiivisteisten laippaliitosten suunnitteluohjeet. Osa 1: Laskentamenetelmä Flanges and their joints. Design rules for gasketed circular flange connections. Part 1: Calculation SFS-EN A1/AC:en:2010 SFS-EN A1:en: Letkut ja letkukokoonpanot SFS-EN 13482:en, Kumiletkut ja letkukokoonpanot. Asfaltti- ja bitumiletkut. Vaatimukset Rubber hoses and hose assemblies for asphalt and bitumen. Specification SFS-EN 13482:en: Muut putkistojen osat SFS-EN 12473:en, Yleisperiaatteet katodiselle suojaukselle merivedessä 7

8 General principles of cathodic protection in seawater SFS-EN 12473:en: Venttiilit SFS-EN 16129:en, Paineensäätimet, automaattiset vaihtoventtiilit sekä niiden varolaitteet ja adaptorit butaanille ja propaanille ja niiden seoksille, suurin ulostulopaine 4 bar ja kapasiteetti enintään 150 kg/h Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures SFS-EN A1:en, District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene SFS-EN 488:en: Teollisuusautomaatiojärjestelmät SFS-EN , Programmable controllers -- Part 9: Singledrop digital communication interface for small sensors and actuators (SDCI) SFS-EN , Part 5-1: Installation of fieldbuses - Installation profiles for CPF 1 SFS-EN , Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11 SFS-EN :2012 SFS-EN , Part 5-13: Installation of fieldbuses - Installation profiles for CPF 13 SFS-EN , Part 5-14: Installation of fieldbuses - Installation profiles for CPF 14 SFS-EN :2012 SFS-EN , Part 5-16: Installation of fieldbuses - Installation profiles for CPF 16 SFS-EN , Part 5-17: Installation of fieldbuses - Installation profiles for CPF 17 SFS-EN , Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18 SFS-EN , Part 5-19: Installation of fieldbuses - Installation profiles for CPF 19 SFS-EN , Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 SFS-EN :2012 SFS-EN , Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3 SFS-EN :2012 SFS-EN , Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 SFS-EN :2012 SFS-EN , Part 5-8: Installation of fieldbuses - Installation profiles for CPF 8 SFS-EN 61918, Industrial communication networks - Installation of communication networks in industrial premises SFS-EN 61918:2008 SFS-EN , Enterprise-control system integration -- Part 1: Models and terminology SFS-EN , Enterprise-control system integration -- Part 2: Objects and attributes for enterprise-control system integration SFS-EN ISO :en, Valvontakeskusten ergonominen suunnittelu. Osa 4: Työpisteiden tilasuunnittelu ja mitat Ergonomic design of control centres. Part 4: Layout and dimensions of workstations (ISO :2013) SFS-EN ISO :en:2005 SFS-EN ISO 13482:en, Robotit ja robotiikkalaitteet. Turvallisuusvaatimukset muille kuin teollisille roboteille. Muu kuin lääketieteellinen robotti henkilökohtaiseen hoitoon. Robots and robotic devices. Safety requirements for personal care robots (ISO 13482:2014) Hitsaus ja juotto, yleistä SFS-EN ISO , Hitsauksen laatuvaatimukset. Metallien vastushitsaus. Osa 1: Kattavat laatuvaatimukset Quality requirements for welding. Resistance welding of metallic materials. Part 1: Comprehensive quality requirements (ISO :2013) SFS-EN ISO :2000 SFS-EN ISO :en:2000 SFS-EN ISO :en, Hitsauksen laatuvaatimukset. Metallien vastushitsaus. Osa 1: Kattavat laatuvaatimukset Quality requirements for welding. Resistance welding of metallic materials. Part 1: Comprehensive quality requirements (ISO :2013) SFS-EN ISO :2000 SFS-EN ISO :en:2000 SFS-EN ISO , Hitsauksen laatuvaatimukset. Metallien vastushitsaus. Osa 2: Peruslaatuvaatimukset Quality requirements for welding. Resistance welding of metallic materials. Part 2: Elementary quality requirements (ISO :2013) SFS-EN ISO :2000 SFS-EN ISO :en:2000 SFS-EN ISO :en, Hitsauksen laatuvaatimukset. Metallien vastushitsaus. Osa 2: Peruslaatuvaatimukset Quality requirements for welding. Resistance welding of metallic materials. Part 2: Elementary quality requirements (ISO :2013) SFS-EN ISO :2000 SFS-EN ISO :en: Hitsausprosessit SFS-EN ISO , Hitsauksen laatuvaatimukset. Metallien vastushitsaus. Osa 1: Kattavat laatuvaatimukset Quality requirements for welding. Resistance welding of metallic materials. Part 1: Comprehensive quality requirements (ISO :2013) SFS-EN ISO :2000 SFS-EN ISO :en:2000 SFS-EN ISO :en, Hitsauksen laatuvaatimukset. Metallien vastushitsaus. Osa 1: Kattavat laatuvaatimukset Quality requirements for welding. Resistance welding of metallic materials. Part 1: Comprehensive quality requirements (ISO :2013) SFS-EN ISO :2000 SFS-EN ISO :en:2000 SFS-EN ISO , Hitsauksen laatuvaatimukset. Metallien vastushitsaus. Osa 2: Peruslaatuvaatimukset 8

9 Quality requirements for welding. Resistance welding of metallic materials. Part 2: Elementary quality requirements (ISO :2013) SFS-EN ISO :2000 SFS-EN ISO :en:2000 SFS-EN ISO :en, Hitsauksen laatuvaatimukset. Metallien vastushitsaus. Osa 2: Peruslaatuvaatimukset Quality requirements for welding. Resistance welding of metallic materials. Part 2: Elementary quality requirements (ISO :2013) SFS-EN ISO :en:2000 SFS-EN ISO : Hitsausaineet SFS-EN ISO A1, Kaasuhitsausvarusteet. Kaasuhitsauksessa, -leikkauksessa ja vastaavissa prosesseissa käytettävien varusteiden materiaalit Gas welding equipment. Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010/AMD 1:2013) SFS-EN ISO 9539:2010 SFS-EN ISO 9539/A1:en, Kaasuhitsausvarusteet. Kaasuhitsauksessa, -leikkauksessa ja vastaavissa prosesseissa käytettävien varusteiden materiaalit Gas welding equipment. Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010/AMD 1:2013) Hitsauslaitteet SFS-EN ISO A1, Kaasuhitsausvarusteet. Kaasuhitsauksessa, -leikkauksessa ja vastaavissa prosesseissa käytettävien varusteiden materiaalit Gas welding equipment. Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010/AMD 1:2013) SFS-EN ISO 9539:2010 SFS-EN ISO 9539/A1:en, Kaasuhitsausvarusteet. Kaasuhitsauksessa, -leikkauksessa ja vastaavissa prosesseissa käytettävien varusteiden materiaalit Gas welding equipment. Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010/AMD 1:2013) Hitsausliitokset ja hitsit SFS-EN 12732:en, Kaasuputkistot. Teräsputkiston hitsaus. Toiminnalliset vaatimukset Gas infrastructure. Welding steel pipework. Functional requirements SFS-EN 12732:en:2000 SFS-EN ISO 2553:en, Hitsaus ja niiden lähiprosessit. Merkinnät piirustuksiin Welding and allied processes. Symbolic representation on drawings. Welded joints (ISO 2553:2013) SFS-EN 22553:en:1994 SFS-EN 22553: Teollisuusuunit SFS-EN , Electrical resistance trace heating systems for industrial and commercial applications -- Part 1: General and testing requirements SFS-EN :2007 SFS-EN , Electrical resistance trace heating systems for industrial and commercial applications -- Part 2: Application guide for system design, installation and maintenance Aurinkoenergiatekniikka SFS-EN ISO 9806:en, Solar energy. Solar thermal collectors. Test methods (ISO 9806:2013) Eristeet SFS-EN , Communication cables -- Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables SFS-EN :en:2002 SFS-EN , Communication cables -- Part 2-25: Common design rules and construction - Polypropylene insulation compounds SFS-EN :en: Suprajohtavuus ja johtavat materiaalit SFS-EN , Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires SFS-EN :2003 SFS-EN , Superconductivity -- Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies SFS-EN , Superconductivity -- Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi and Bi-2212 composite superconductors Kaapelit ja johtimet SFS-EN /A1, Specifications for particular types of winding wires -- Part 0-3: General requirements - Enamelled round aluminium wire SFS-EN /A1, Winding wires - Test methods -- Part 3: Mechanical properties Sähköeristys SFS-EN 62068, Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses SFS-EN : Sähkötarvikkeet SFS-EN , Measuring relays and protection equipment -- Part 149: Functional requirements for thermal electrical relays SFS-EN :1998 SFS-EN , Coupling capacitors and capacitor dividers -- Part 2: AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application SFS-EN 62444, Cable glands for electrical installations SFS-EN 50262/A1:en:2001 SFS-EN 50262/A2:en:2005 SFS-EN 50262:en:1998 SFS-EN 62606, General requirements for arc fault detection devices Kytkin- ja ohjauslaitteet SFS-EN , Low-voltage switchgear and controlgear -- Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) SFS-EN :1999 SFS-EN /A1:2005 SFS-EN , Low-voltage switchgear and controlgear -- Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors SFS-EN , High-voltage switchgear and controlgear -- Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines SFS-EN , High-voltage switchgear and controlgear -- Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures Valaisimet ja niihin liittyvät laitteet SFS-EN 60081/A5, Double-capped fluorescent lamps - Performance specifications 9

10 SFS-EN 60927/A1, Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements Pyörivät koneet SFS-EN ISO 1680:en, Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013) SFS-EN ISO 1680:en: Muuntajat. Kuristimet SFS-EN , Power transformers -- Part 14: Liquid-immersed power transformers using high-temperature insulation materials SFS-EN , Power transformers -- Part 3: Insulation levels, dielectric tests and external clearances in air SFS-EN :2001 SFS-EN , Safety of transformers, reactors, power supply units and similar products for supply voltages up to V -- Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units Tasasuuntaajat. Vaihtosuuntaajat. Stabiloitu virtalähde SFS-EN 50563/A1, External a.c. - d.c. and a.c. - a.c. power supplies Determination of no-load power and average efficiency of active modes SFS-EN , Uninterruptible power systems (UPS) -- Part 4: Environmental aspects - Requirements and reporting Galvaaniset paristot ja akut SFS-EN , Aircraft batteries -- Part 1: General test requirements and performance levels SFS-EN :2005 SFS-EN , Aircraft batteries - Part 2: Design and construction requirements SFS-EN :2005 SFS-EN , Aircraft batteries - Part 3: Product specification and declaration of design and performance (DDP) SFS-EN :2005 SFS-EN , Universal serial bus interfaces for data and power -- Part 3: USB battery charging specification, Revision Sähkönjakeluverkot SFS-EN , Vaihtosähköilmajohdot yli 1 kv jännitteillä. Osa 1: Yleiset vaatimukset. Yhteiset määrittelyt Overhead electrical lines exceeding AC 1 kv -- Part 1: General requirements - Common specifications SFS-EN , Coupling capacitors and capacitor dividers -- Part 2: AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application SFS-EN 60743, Live working - Terminology for tools, devices and equipment SFS-EN 60743:2002 SFS-EN 60743/A1:2008 SFS-EN 61954/A1, Static VAR compensators (SVC) - Testing of thyristor valves Erityisoloissa käytettävät sähkölaitteet SFS-EN 60743, Live working - Terminology for tools, devices and equipment SFS-EN 60743:2002 SFS-EN 60743/A1: Elektroniikan komponentit, yleistä SFS-EN , Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms SFS-EN : Vastukset SFS-EN /A1, Detail Specification: Fixed low power film resistors - Metal film resistors on high grade ceramic, conformal coated or molded, axial or preformed leads SFS-EN /A1, Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1 SFS-EN /A2, Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2 SFS-EN /A1, Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0, Kondensaattorit SFS-EN /A1, AC motor capacitors -- Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation SFS-EN /A1, AC motor capacitors -- Part 2: Motor start capacitors SFS-EN , Coupling capacitors and capacitor dividers -- Part 2: AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application Puolijohdelaitteet SFS-EN 61954/A1, Static VAR compensators (SVC) - Testing of thyristor valves Elektroniset näyttölaitteet SFS-EN , Liquid crystal display devices -- Part 10-1: Environmental, endurance and mechanical test methods Mechanical SFS-EN :1999 SFS-EN , Organic Light Emitting Diode (OLED) displays -- Part 5-3: Measuring methods of image sticking and lifetime Pietsosähköiset ja dielektriset laitteet SFS-EN , Measurement of quartz crystal unit parameters -- Part 6: Measurement of drive level dependence (DLD) SFS-EN : Piirilevyt ja komponenttilevyt SFS-EN , Materials for printed boards and other interconnecting structures -- Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly SFS-EN , Materials for printed boards and other interconnecting structures -- Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly Elektroniikkalaitteiden mekaaniset rakenteet SFS-EN , Packaging of components for automatic han- 10

11 dling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms SFS-EN :1998 SFS-EN , Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC and IEC series - Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets Optoelektroniikka. Laserlaitteet SFS-EN , Organic Light Emitting Diode (OLED) displays -- Part 5-3: Measuring methods of image sticking and lifetime SFS-EN ISO 11252:en, Laserit ja lasereihin liittyvät laitteet. Laserlaite. Dokumentoinnin vähimmäisvaatimukset Lasers and laser-related equipment. Laser device. Minimum requirements for documentation (ISO 11252:2013) SFS-EN ISO 11252:en:2009 SFS-EN ISO :en, Koneturvallisuus. Laserkäsittelykoneet. Osa 3: Kohinanvaimennus ja kohinan mittausmenetelmät laserkäsittelykoneille ja kädessä pidettäville laserkäsittelykoneille ja liittyville lisälaitteille (tarkkuusluokka 2) Safety of machinery. Laser processing machines. Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO :2013) Tietoliikenne, yleistä SFS-EN 61918, Industrial communication networks - Installation of communication networks in industrial premises SFS-EN 61918: Televiestintäpalvelut. Sovellukset SFS-EN :en, Accessibility requirements suitable for public procurement of ICT products and services in Europe Televerkot SFS-EN , Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement -- Part 1: Apparatus for in-home use SFS-EN , Passive RF and microwave devices, intermodulation level measurement -- Part 5: Measurement of passive intermodulation in filters SFS-EN 62037:2000 SFS-EN , Passive RF and microwave devices, intermodulation level measurement -- Part 6: Measurement of passive intermodulation in antennas SFS-EN 62037: Radioliikenne SFS-EN V1.3.1, Electromagnetic compatibility and Radio spectrum Matters (ERM). Road Transport and Traffic Telematics (RTTT). Short range radar equipment operating in the 24,05 GHz to 24,25 GHz frequency range for automotive application. Part 1: Technical characteristics and test methods SFS-EN V1.3.1, Electromagnetic compatibility and Radio spectrum Matters (ERM). Road Transport and Traffic Telematics (RTTT). Short range radar equipment operating in the 24,05 GHz to 24,25 GHz frequency range for automotive application. Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive SFS-EN , Cable networks for television signals, sound signals and interactive services -- Part 8: Electromagnetic compatibility for networks SFS-EN /A11:en:2009 SFS-EN :en: Sähkömagneettinen yhteensopivuus SFS-EN , Cable networks for television signals, sound signals and interactive services -- Part 8: Electromagnetic compatibility for networks SFS-EN /A11:en:2009 SFS-EN :en:2003 SFS-EN 50413/A1, Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz GHz) Televiestintälaitteiden komponentit ja tarvikkeet SFS-EN , Communication cables - Specifications for test methods -- Part 3-8: Mechanical test methods - Abrasion resistance of cable sheath markings SFS-EN :en:2001 SFS-EN , Communication cables -- Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables SFS-EN :en:2002 SFS-EN , Communication cables -- Part 2-25: Common design rules and construction - Polypropylene insulation compounds SFS-EN :en:2002 SFS-EN , Radio-frequency connectors -- Part 1: Generic specification - General requirements and measuring methods SFS-EN :1995 SFS-EN /A1:1996 SFS-EN /A2:1997 SFS-EN , Universal serial bus interfaces for data and power -- Part 2: Universal serial bus - Micro-USB cables and connectors specification, revision Audio-, video ja audiovisuaalinen tekniikka SFS-EN , Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology -- Part 1: General method for one package equipment SFS-EN :en:2000 SFS-EN , Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology -- Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design SFS-EN :en: Televisio- ja radiolähetykset SFS-EN V1.5.1, Digital Video Broadcasting (DVB). Subtitling systems Kuituoptiikkaviestintä SFS-EN , Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 17-1: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN category B1.3 fibre and field mounted onto IEC category B1.3 or B6a_1 or B6a_2 singlemode fibre, category C SFS-EN , Simplex and duplex cables to be used for cords -- Part 2: Detailed specification and minimum 11

12 requirements for a 3,0 mm simplex ruggedised single mode fibre cable to be used for patchcords/cords category U SFS-EN , Optical fibre cables - Part 1-2: Generic specification - Cross reference table for optical cable test procedures SFS-EN :2004 SFS-EN , Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-25: Examinations and measurements - Concentricity of the non-angled ferrules and non-angled ferrules with fibre installed SFS-EN :1997 SFS-EN , Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces -- Part 1: General and guidance SFS-EN :1997 SFS-EN , Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces -- Part 4: Type SC connector family SFS-EN /A2:2001 SFS-EN :1997 SFS-EN /A1:2000 SFS-EN , Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces -- Part 6: Type MU connector family SFS-EN :1997 SFS-EN /A1:2001 SFS-EN /A2: Etäkäyttö. Etämittaus SFS-EN , Application integration at electric utilities - System interfaces for distribution management -- Part 100: Implementation profiles SFS-EN , Energy management system application program interface (EMS-API) -- Part 301: Common information model (CIM) base SFS-EN : Merkistöt ja tietojen koodaus SFS-EN 16495:en, Air Traffic Management. Information security for organisations supporting civil aviation operations SFS-EN :en, Protection profiles for secure signature creation device. Part 2: Device with key generation SFS-EN :en, Turvallisten allekirjoitusten luomismenetelmien suojausprofiilit. Osa 3: Laitteet, joissa on avaimen tuontimahdollisuus Protection profiles for secure signature creation device. Part 3: Device with key import SFS-EN :en, Turvallisten allekirjoitusten luomismenetelmien suojausprofiilit. Osa 4: Laitteet, jotka luovat avaimet ja joilla on luotettu viestintäyhteys sertifikaatin luomissovelluksen kanssa Protection profiles for secure signature creation device. Part 4: Extension for device with key generation and trusted channel to certificate generation application SFS-EN :en, Turvallisten allekirjoitusten luomismenetelmien suojausprofiilit. Osa 5: Laitteet, jotka luovat avaimet ja joilla on luotettu viestintäyhteys allekirjoituksen luomissovelluksen kanssa Protection profiles for secure signature creation device. Part 5: Extension for device with key generation and trusted channel to signature creation application Avointen järjestelmien yhteenliittäminen (OSI) SFS-EN :en, Protection profiles for secure signature creation device. Part 2: Device with key generation SFS-EN :en, Turvallisten allekirjoitusten luomismenetelmien suojausprofiilit. Osa 3: Laitteet, joissa on avaimen tuontimahdollisuus Protection profiles for secure signature creation device. Part 3: Device with key import SFS-EN :en, Turvallisten allekirjoitusten luomismenetelmien suojausprofiilit. Osa 4: Laitteet, jotka luovat avaimet ja joilla on luotettu viestintäyhteys sertifikaatin luomissovelluksen kanssa Protection profiles for secure signature creation device. Part 4: Extension for device with key generation and trusted channel to certificate generation application SFS-EN :en, Turvallisten allekirjoitusten luomismenetelmien suojausprofiilit. Osa 5: Laitteet, jotka luovat avaimet ja joilla on luotettu viestintäyhteys allekirjoituksen luomissovelluksen kanssa Protection profiles for secure signature creation device. Part 5: Extension for device with key generation and trusted channel to signature creation application SFS-EN , Part 5-1: Installation of fieldbuses - Installation profiles for CPF 1 SFS-EN , Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11 SFS-EN :2012 SFS-EN , Part 5-13: Installation of fieldbuses - Installation profiles for CPF 13 SFS-EN , Part 5-14: Installation of fieldbuses - Installation profiles for CPF 14 SFS-EN :2012 SFS-EN , Part 5-16: Installation of fieldbuses - Installation profiles for CPF 16 SFS-EN , Part 5-17: Installation of fieldbuses - Installation profiles for CPF 17 SFS-EN , Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18 SFS-EN , Part 5-19: Installation of fieldbuses - Installation profiles for CPF 19 SFS-EN , Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 SFS-EN :2012 SFS-EN , Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3 SFS-EN :2012 SFS-EN , Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 SFS-EN :2012 SFS-EN , Part 5-8: Installation of fieldbuses - Installation profiles for CPF Rajapinnat ja liitäntälaitteet SFS-EN , Universal serial bus interfaces for data and power -- Part 1: Universal serial bus specification, revision

13 SFS-EN , Universal serial bus interfaces for data and power -- Part 2: Universal serial bus - Micro-USB cables and connectors specification, revision 1.01 SFS-EN , Universal serial bus interfaces for data and power -- Part 3: USB battery charging specification, Revision Tietotekniikan sovellukset SFS-EN 16495:en, Air Traffic Management. Information security for organisations supporting civil aviation operations SFS-EN :en, Protection profiles for secure signature creation device. Part 2: Device with key generation SFS-EN :en, Turvallisten allekirjoitusten luomismenetelmien suojausprofiilit. Osa 3: Laitteet, joissa on avaimen tuontimahdollisuus Protection profiles for secure signature creation device. Part 3: Device with key import SFS-EN :en, Turvallisten allekirjoitusten luomismenetelmien suojausprofiilit. Osa 4: Laitteet, jotka luovat avaimet ja joilla on luotettu viestintäyhteys sertifikaatin luomissovelluksen kanssa Protection profiles for secure signature creation device. Part 4: Extension for device with key generation and trusted channel to certificate generation application SFS-EN :en, Turvallisten allekirjoitusten luomismenetelmien suojausprofiilit. Osa 5: Laitteet, jotka luovat avaimet ja joilla on luotettu viestintäyhteys allekirjoituksen luomissovelluksen kanssa Protection profiles for secure signature creation device. Part 5: Extension for device with key generation and trusted channel to signature creation application SFS-EN :en, Security requirements for device for authentication. Part 1: Protection profile for core functionality SFS-EN :en, Security requirements for device for authentication. Part 2: Protection profile for extension for trusted channel to certificate generation application SFS-EN :en, Security requirements for device for authentication. Part 3: Additional functionality for security targets SFS-EN , Programmable controllers -- Part 9: Singledrop digital communication interface for small sensors and actuators (SDCI) SFS-EN 61918, Industrial communication networks - Installation of communication networks in industrial premises SFS-EN 61918:2008 SFS-EN , Enterprise-control system integration -- Part 1: Models and terminology SFS-EN , Enterprise-control system integration -- Part 2: Objects and attributes for enterprise-control system integration SFS-EN ISO :en, Health informatics. Point-of-care medical device communication. Part 10103: Nomenclature. Implantable device, cardiac (ISO/IEEE :2014) SFS-EN ISO :en, Liikenne- ja matkainformaatio (TTI). Liikenne- ja matkainformaatio koodattuina viesteinä. Osa 1: RDS-TMC:n (Radio Data System - Traffic Message Channel) koodausprotokolla. ALERT-C Intelligent transport systems. Traffic and travel information messages via traffic message coding. Part 1: Coding protocol for Radio Data System. Traffic Message Channel (RDS-TMC) using ALERT-C (ISO :2013) SFS-EN ISO AC:en:2003 SFS-EN ISO :en, Liikenne- ja matkainformaatio (TTI). Liikenne- ja matkainformaatio koodattuina viesteinä. Osa 2: RDS-TMC:n (Radio data system. Traffic message channel) tapahtuma- ja tietokoodit Intelligent transport systems. Traffic and travel information messages via traffic message coding. Part 2: Event and information codes for Radio Data System. Traffic Message Channel (RDS-TMC) using ALERT-C (ISO :2013) SFS-EN ISO :en:2003 SFS-EN ISO :en, Liikenne- ja matkainformaatio (TTI). Liikenne- ja matkainformaatio koodattuina viesteinä. Osa 3: Tapahtumien paikantaminen ALERT- C:ssä Intelligent transport systems. Traffic and travel information messages via traffic message coding. Part 3: Location referencing for Radio Data System. Traffic Message Channel (RDS- TMC) using ALERT-C (ISO :2013) SFS-EN ISO :en:2004 SFS-EN ISO 18104:en, Health informatics. Categorial structures for representation of nursing diagnoses and nursing actions in terminological systems (ISO 18104:2014) SFS-EN ISO 18104:en:2004 SFS-EN ISO 19156:en, Geographic information. Observations and measurements (ISO 19156:2011) SFS-EN ISO 19157:en, Geographic information. Data quality (ISO 19157:2013) SFS-EN ISO/IEC :en, Information technology. Learning, education and training. Metadata for learning resources. Part 3: Basic application profile (ISO/IEC :2011) Ajoneuvojen tekniset järjestelmät SFS-EN , Alcohol interlocks - Test methods and performance requirements -- Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use SFS-EN :en: Sähkö- ja elektroniset laitteet SFS-EN , Alcohol interlocks - Test methods and performance requirements -- Part 1: Instruments for drink-driving-offender programs SFS-EN :en: Hyötyajoneuvot SFS-EN 13776:en, Nestekaasulaitteet ja varusteet. Nestekaasusäiliöautojen kuorman täyttö ja tyhjennys LPG equipment and accessories. Filling and discharge procedures for LPG road tankers SFS-EN 13776:en: Kiskoliikennetekniikan materiaalit ja komponentit SFS-EN 13802:en, Kiskoliikenne. Jousituselementit. Hydrauliset iskunvaimentimet Railway applications. Suspension components. Hydraulic dampers SFS-EN 13802:en: Kiskoliikennekalusto SFS-EN :en, Kiskoliikenne. Aerodynamiikka. Osa 4: Aerodynamiikan vaatimukset ja testimenetelmät avoimella radalla Railway applications. Aerodynamics. Part 4: Requirements and test procedures for aerodynamics on open track SFS-EN A1:en:2009 SFS-EN 14841:en, Nestekaasulaitteet ja -varusteet. Nestekaasun rautatiesäiliövaunujen tyhjennys LPG equipment and accessories. Discharge 13

14 procedures for LPG rail tankers SFS-EN 14841:en:2006 SFS-EN :en, Kiskoliikenne. Kiskoajoneuvojen merkintä. Osa 2: Vaunujen, veturin voimanlähteiden, vetureiden ja ratakoneiden ulkoiset merkinnät Railway applications. Markings of railway vehicles. Part 2: External markings on coaches, motive power units, locomotives and on track machines SFS-EN 16235:en, Kiskoliikenne. Kiskoajoneuvojen kulkuominaisuuksien hyväksymistestaus. Tavaravaunut. Erivapauden myöntämisehdot tavaravaunuille, joiden ominaisuudet on testattu standardin EN mukaisesti Railway application. Testing for the acceptance of running characteristics of railway vehicles. Freight wagons. Conditions for dispensation of freight wagons with defined characteristics from on-track tests according to EN SFS-EN 16362:en, Kiskoliikenne. Huoltopisteet. Vedenottopisteiden laitteet Railway applications. Ground based services. Water restocking equipment SFS-EN /A1, Railway applications - Rolling stock equipment - Capacitors for power electronics -- Part 3: Electric double-layer capacitors SFS-EN , Electronic railway equipment - On board driving data recording system -- Part 1: System specification Laivanrakennuksen yleisstandardit SFS-EN 12473:en, Yleisperiaatteet katodiselle suojaukselle merivedessä General principles of cathodic protection in seawater SFS-EN 12473:en: Putkistot SFS-EN :en, Ruostumattomat pituushitsatut muhvilliset putket ja putken osat viemärijärjestelmiin. Osa 4: Komponentit tyhjöpoistojärjestelmiin ja laivojen viemärijärjestelmiin Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems. Part 4: Components for vacuum drainage systems and for drainage systems on ships SFS-EN :en: Lastitilat SFS-EN ISO 8311:en, Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. Calibration of membrane tanks and independent prismatic tanks in ships. Manual and internal electro-optical distance-ranging methods (ISO 8311:2013) SFS-EN ISO 8311: Rakentamisessa käytettävät materiaalit SFS-EN 2030, Aerospace series. Steel X105CrMo17 (1.3544). Hardened and tempered. Bars. De = 150 mm SFS-EN 2563, Aerospace series. Carbone fibre reinforced plastics. Unidirectional laminates. Determination of the apparent interlaminar shear strength Rakentamisessa käytettävät kiinnittimet SFS-EN 2149, Aerospace series. Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series SFS-EN 2149:1993 SFS-EN 2648, Aerospace series. Washers, concave, in alloy steel, cadmium plated SFS-EN 2648: Rakentamisessa käytettävät komponentit SFS-EN 2030, Aerospace series. Steel X105CrMo17 (1.3544). Hardened and tempered. Bars. De = 150 mm SFS-EN 4156, Aerospace series. Rod ends, with self-aligning double row ball bearings and threaded shank in steel. Inner ring and balls in corrosion resisting steel. Dimensions and loads. Inch series Lento- ja avaruusalusten sähkölaitteet ja -järjestelmät SFS-EN , Aerospace series. Cables, electrical, for general purpose. Operating temperatures between. 55 C and 260 C. Part 010: DR family, single UV laser printable. Product standard SFS-EN :2006 SFS-EN , Aerospace series. Cable, electrical, fire resistant. Operating temperatures between. 65 C and 260 C. Part 005: DW family, single UV laser printable and multicore assembly. Light weight. Product standard SFS-EN , Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A. Part 001: Technical specification SFS-EN :1999 SFS-EN , Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A. Part 004: UNC thread terminals. Product standard SFS-EN :1999 SFS-EN , Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A. Part 001: Technical specification SFS-EN :1999 SFS-EN , Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. Part 004: UNC thread terminals. Product standard SFS-EN :1999 SFS-EN , Aerospace series. Electrical contacts used in elements of connection. Part 065: Contacts, electrical, male, type A, crimp, class S, size 8. Product standard SFS-EN :2006 SFS-EN , Aerospace series. Electrical contacts used in elements of connection. Part 066: Contacts, electrical, female, type A, crimp, class S, size 8. Product standard SFS-EN :2006 SFS-EN , Aircraft batteries -- Part 1: General test requirements and performance levels SFS-EN :2005 SFS-EN , Aircraft batteries - Part 2: Design and construction requirements SFS-EN :2005 SFS-EN , Aircraft batteries - Part 3: Product specification and declaration of design and performance (DDP) SFS-EN : Lento- tai avaruusaluksessa olevat laitteet ja välineet SFS-EN , Aerospace series. Cable, electrical, for digital data transmission. Part 012: Single braid. Star Quad 100 ohms. 260 C. Type KH. Product standard Pakkaukset ja jakelu, yleistä SFS-EN ISO 13274:en, Packaging. Transport packaging for dangerous goods. Plastics compatibility testing for packaging and IBCs (ISO 13274:2013) 14

15 SFS-EN ISO 16495:en, Packaging. Transport packaging for dangerous goods. Test methods (ISO 16495:2013) Pakkauskoneet SFS-EN :en, Pakkauskoneet. Turvallisuus. Osa 10: Yleiset vaatimukset Safety of packaging machines. Part 10: General Requirements Tekstiilikuidut SFS-EN ISO :en, Textiles. Quantitative chemical analysis. Part 25: Mixtures of polyester and certain other fibres (method using trichloroacetic acid and chloroform) (ISO :2013) Tekstiilit, yleistä SFS-EN 16483:en, Nahka. Nahkaosien merkintä tekstiilituotteissa Leather. Labelling of leather trims in textile products SFS-EN ISO 20743, Tekstiilit. Antibakteerisen tehon määritys Textiles. Determination of antibacterial activity of textile products (ISO 20743:2013) SFS-EN ISO 20743:2007 SFS-EN ISO 20743:en:2007 SFS-EN ISO 20743:en, Tekstiilit. Antibakteerisen tehon määritys Textiles. Determination of antibacterial activity of textile products (ISO 20743:2013) SFS-EN ISO 20743:2007 SFS-EN ISO 20743:en: Tekstiilikankaat SFS-EN ISO 13015:en, Woven fabrics. Distortion. Determination of skew and bow (ISO 13015:2013) SFS-EN ISO :en, Tekstiilit. Kankaiden lujuusominaisuudet. Osa 2: Suurimman murtovoiman määritys grabmenetelmällä Textiles. Tensile properties of fabrics. Part 2: Determination of maximum force using the grab method (ISO :2014) SFS-EN ISO : Lattianpäällysteet SFS-EN 12229:en, Liikuntapaikkojen pintarakenteet. Keinonurmen ja neulehuopamattojen testikappaleiden valmistus Surfaces for sports areas. Procedure for the preparation of synthetic turf and needle-punch test pieces SFS-EN 12229:en:2007 SFS-EN 14215:en, Textile floor coverings. Classification of machine-made pile rugs and runners SFS-EN 14215:en: Geotekstiilit SFS-EN 13249:en, Geotekstiilit ja vastaavat tuotteet. Toiminnalliset vaatimukset teiden ja muiden liikennöityjen alueiden rakentamisessa (lukuun ottamatta rautateitä ja asfaltilla sidottuja kerroksia) Geotextiles and geotextile-related products. Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) SFS-EN 13249:2001 SFS-EN 13249/A1:2005 SFS-EN 13249/A1:en:2005 SFS-EN 13249:en:2001 SFS-EN 13250:en, Geotekstiilit ja vastaavat tuotteet. Toiminnalliset vaatimukset rautateiden rakentamisessa Geotextiles and geotextile-related products. Characteristics required for use in the construction of railways SFS-EN 13250/A1:en:2005 SFS-EN 13250:en:2001 SFS-EN 13250:2001 SFS-EN 13250/A1:2005 SFS-EN 13251:en, Geotekstiilit ja vastaavat tuotteet. Toiminnalliset vaatimukset maanrakennustöissä sekä perustusten ja tukirakenteiden tekemisessä Geotextiles and geotextile-related products. Characteristics required for use in earthworks, foundations and retaining structures SFS-EN 13251:2001 SFS-EN 13251/A1:2005 SFS-EN 13251/A1:en:2005 SFS-EN 13251:en:2001 SFS-EN 13253:en, Geotekstiilit ja vastaavat tuotteet. Toiminnalliset vaatimukset eroosiosuojausten tekemisessä (rantojen suojarakenteet, luiskien suojaverhoukset) Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments) SFS-EN 13253:2001 SFS-EN 13253/A1:2005 SFS-EN 13253/A1:en:2005 SFS-EN 13253:en:2001 SFS-EN 13254:en, Geotekstiilit ja vastaavat tuotteet. Toiminnalliset vaatimukset altaiden ja patojen rakentamisessa Geotextiles and geotextile-related products. Characteristics required for use in the construction of reservoirs and dams SFS-EN AC:2001 SFS-EN AC:en:2001 SFS-EN 13254/A1:2005 SFS-EN 13254/A1:en:2005 SFS-EN 13255:en, Geotekstiilit ja vastaavat tuotteet. Toiminnalliset vaatimukset kanavien rakentamisessa Geotextiles and geotextile-related products. Characteristics required for use in the construction of canals SFS-EN AC:en:2001 SFS-EN 13255/A1:2005 SFS-EN 13255/A1:en:2005 SFS-EN AC:2001 SFS-EN 13256:en, Geotekstiilit ja vastaavat tuotteet. Toiminnalliset vaatimukset tunnelien ja maanalaisten tilojen rakentamisessa Geotextiles and geotextile-related products. Characteristics required for use in the construction of tunnels and underground structures SFS-EN 13256/A1:2005 SFS-EN 13256/A1:en:2005 SFS-EN AC:2001 SFS-EN AC:en:2001 SFS-EN 13257:en, Geotekstiilit ja vastaavat tuotteet. Toiminnalliset vaatimukset kaatopaikkojen rakentamisessa Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals SFS-EN AC:2001 SFS-EN AC:en:2001 SFS-EN 13257/A1:2005 SFS-EN 13257/A1:en:2005 SFS-EN 13265:en, Geotekstiilit ja vastaavat tuotteet. Toiminnalliset vaatimukset jätealtaiden rakentamisessa Geotextiles and geotextile-related products. Characteristics required for use in liquid waste containment projects SFS-EN AC:2001 SFS-EN AC:en:2001 SFS-EN 13265/A1:2005 SFS-EN 13265/A1:en: Nahkateollisuus SFS-EN 16419:en, Leather. Chamois leather for cleaning purposes. Classification and requirements SFS-EN 16483:en, Nahka. Nahkaosien merkintä tekstiilituotteissa Leather. Labelling of leather trims in textile products SFS-EN ISO 17489:en, Leather. Chemical tests. Determination of tan content in synthetic tanning agents (ISO 17489:2013) 15

16 Vaatteet SFS-EN , Vaatetuksen kokomerkintä. Osa 3: Vartalonmitat ja mittavälit Size designation of clothes. Part 3: Body measurements and intervals SFS-EN :2005 SFS-EN :en:2005 SFS-EN :en, Vaatetuksen kokomerkintä. Osa 3: Vartalonmitat ja mittavälit Size designation of clothes. Part 3: Body measurements and intervals SFS-EN :2005 SFS-EN :en: Jalkineet SFS-EN ISO 16187:en, Footwear and footwear components. Test method to assess antibacterial activity (ISO 16187:2013) Maatalouskoneet ja -laitteet, yleistä SFS-EN ISO :en, Itsekulkevat maatalouskoneet. Vakauden arviointi. Osa 1. Periaatteet Self-propelled agricultural machinery. Assessment of stability. Part 1: Principles (ISO :2013) SFS-EN ISO :en, Maatalouskoneet. Turvallisuus. Osa 1: Yleiset vaatimukset Agricultural machinery. Safety. Part 1: General requirements (ISO :2013) Maataloustraktorit ja perävaunut SFS-EN ISO :en, Itsekulkevat maatalouskoneet. Vakauden arviointi. Osa 1. Periaatteet Self-propelled agricultural machinery. Assessment of stability. Part 1: Principles (ISO :2013) Lannoitteiden varastointi-, käsittely- ja levityskoneet SFS-EN 690:en, Maatalouskoneet. Lannoitteenlevittimet. Turvallisuus Agricultural machinery. Manure spreaders. Safety SFS-EN A1:en: Kasvinsuojelukoneet SFS-EN ISO :en, Kasvinsuojelukoneet ja -laitteet. Reppuruiskut. Osa 1: Turvallisuus ja ympäristövaatimukset Equipment for crop protection. Knapsack sprayers. Part 1: Safety and environmental requirements (ISO :2013) SFS-EN ISO :en, Kasvinsuojelukoneet ja -laitteet. Reppuruiskut. Osa 2: Testausmenetelmät Equipment for crop protection. Knapsack sprayers. Part 2: Test methods (ISO :2013) Puutarhanhoitokoneet SFS-EN A1:en, Puutarhakoneet. Puutarhapuhaltimet, imulaitteet ja yhdistetyt puhallus- ja imulaitteet. Turvallisuus Garden equipment. Garden blowers, vacuums and blower/vacuums. Safety SFS-EN 15503:en:2010 SFS-EN ISO 10517/A1:en, Powered hand-held hedge trimmers. Safety (ISO 10517:2009/Amd 1:2013) SFS-EN ISO :en, Puutarhakoneet. Polttomoottorikäyttöisten ruohonleikkureiden turvallisuusvaatimukset. Osa 1: Terminologia ja yhteiset testit Garden equipment. Safety requirements for combustion-engine-powered lawnmowers. Part 1: Terminology and common tests (ISO :2013) SFS-EN ISO :en, Puutarhakoneet. Polttomoottorikäyttöisten ruohonleikkureiden turvallisuusvaatimukset. Osa 2: Kävellen ohjattavat leikkurit Garden equipment. Safety requirements for combustion-engine-powered lawnmowers. Part 2: Pedestrian-controlled lawnmowers (ISO :2013) SFS-EN ISO :en, Puutarhakoneet. Polttomoottorikäyttöisten ruohonleikkureiden turvallisuusvaatimukset. Osa 3: Ajoleikkurit Garden equipment. Safety requirements for combustion-engine-powered lawnmowers. Part 3: Ride-on lawnmowers with seated operator (ISO :2013) Lannoitteet SFS-EN :en, Fertilizers. Determination of chelating agents in fertilizers by chromatography. Part 1: Determination of EDTA, HEEDTA and DTPA by ion chromatography SFS-EN :en:2001 SFS-EN 16318:en, Lannoitteet. Hivenaineiden määritys. Kromi VI:n määritys fotometrialla (menetelmä A) ja ionikromatografialla käyttäen spektrofotometristä havaitsemista (menetelmä B) Fertilizers. Determination of trace elements. Determination of chromium(vi) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B) CEN/TS 16318:en:2012 SFS-EN 16320:en, Lannoitteet. Hivenaineiden määritys. Elohopean määritys höyryn kehittymistä (VG) käyttäen kuningasvesiliuotuksen jälkeen Fertilizers. Determination of trace elements. Determination of mercury by vapour generation (VG) after aqua regia dissolution CEN/TS 16320:en: Eläinten rehut SFS-EN ISO :en, Microbiology of the food chain. Horizontal method for the enumeration of microorganisms. Part 1: Colony count at 30 degrees C by the pour plate technique (ISO :2013) SFS-EN ISO 4833:2003 SFS-EN ISO 4833:en:2003 SFS-EN ISO :en, Microbiology of the food chain. Horizontal method for the enumeration of microorganisms. Part 2: Colony count at 30 degrees C by the surface plating technique (ISO :2013) SFS-EN ISO 4833:2003 SFS-EN ISO 4833:en: Yleiset testaus- ja analysointimenetelmät SFS-EN :en, Foods of plant origin. Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS. Part 1: General considerations SFS-EN :en:2009 SFS-EN :en, Foods of plant origin. Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS. Part 2: Methods for extraction and clean-up SFS-EN :en:2009 SFS-EN :en, Foods of plant origin. Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS. Part 3: Determination and confirmatory tests SFS-EN :en: Viljat, palkokasvit ja niiden jalosteet SFS-EN A1:en, Cereals and cereal products. Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and feed barley (Hordeum vulgare L.) SFS-EN 15587/AC:en:2009 SFS-EN 15587:en:2008 SFS-EN 16378:en, Cereals. Determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.) 16

17 SFS-EN ISO 20483:en, Cereals and pulses. Determination of the nitrogen content and calculation of the crude protein content. Kjeldahl method (ISO 20483:2013) SFS-EN ISO 20483:en: Hedelmät. Kasvikset SFS-EN :en, Foods of plant origin. Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS. Part 1: General considerations SFS-EN :en:2009 SFS-EN :en, Foods of plant origin. Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS. Part 2: Methods for extraction and clean-up SFS-EN :en:2009 SFS-EN :en, Foods of plant origin. Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS. Part 3: Determination and confirmatory tests SFS-EN :en: Maito ja maitovalmisteet SFS-EN ISO :en, Milk and milk products. Determination of alkaline phosphatase activity. Part 1: Fluorimetric method for milk and milk-based drinks (ISO :2013) SFS-EN ISO :en:2006 SFS-EN ISO :en, Milk and milk products. Determination of nitrogen content. Part 1: Kjeldahl principle and crude protein calculation (ISO :2014) SFS-EN ISO :en:2002 SFS-EN ISO :en: Ruokaöljyt ja ravintorasvat. Öljykasvien siemenet SFS-EN ISO 3657:en, Animal and vegetable fats and oils. Determination of saponification value (ISO 3657:2013) SFS-EN ISO 3657:en:2004 SFS-EN ISO 3961:en, Animal and vegetable fats and oils. Determination of iodine value (ISO 3961:2013) SFS-EN ISO 3961:en:2012 SFS-EN ISO /A1:en, Rapeseed. Determination of glucosinolates content. Part 1: Method using high-performance liquid chromatography. Amendment 1 (ISO :1992/Amd 1:2013) Mausteet. Lisäaineet SFS-EN ISO 3961:en, Animal and vegetable fats and oils. Determination of iodine value (ISO 3961:2013) SFS-EN ISO 3961:en: Aistinvarainen arviointi SFS-EN ISO 8586:en, Sensory analysis. General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors (ISO 8586:2012) SFS-EN ISO :en: Elintarvikkeiden kanssa kosketukseen joutuvat materiaalit ja tarvikkeet SFS-EN A1:en, Influence of metallic materials on water intended for human consumption. Dynamic rig test for assessment of metal release. Part 1: Design and operation SFS-EN :en:2008 SFS-EN 16453:en, Pulp, paper and paperboard. Determination of phthalates in extracts from paper and paperboard Analyyttinen kemia SFS-EN , Alcohol interlocks - Test methods and performance requirements -- Part 1: Instruments for drink-driving-offender programs SFS-EN :en:2006 SFS-EN , Alcohol interlocks - Test methods and performance requirements -- Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use SFS-EN :en:2008 SFS-EN , Expression of performance of gas analyzers -- Part 7: Tuneable semiconductor laser gas analyzers Puunsuoja-aineet SFS-EN 118:en, Wood preservatives. Determination of preventive action against Reticulitermes species (European termites) (Laboratory method) SFS-EN 118:en:2005 SFS-EN A1:en, Durability of wood and wood-based products. Efficacy of preventive wood preservatives as determined by biological tests. Part 1: Specification according to use class SFS-EN 599-1:en: Eteeriset öljyt SFS-EN ISO 9235:en, Aromatic natural raw materials. Vocabulary (ISO 9235:2013) Kosmetiikka. Hygieniatarvikkeet SFS-EN ISO 28888:en, Hammaslääketiede. Menetelmä suuveden käytöstä aiheutuvien hampaan kovakudosvaurioiden kartoittamiseksi Dentistry. Screening method for erosion potential of oral rinses on dental hard tissues (ISO 28888:2013) Vedenpuhdistuskemikaalit SFS-EN 12911:en, Talousveden käsittelyyn tarkoitetut tuotteet. Mangaani glaukoniittihiekka Products used for treatment of water intended for human consumption. Manganese greensand SFS-EN 12911:en:2006 SFS-EN 15031:en, Uima-allasvesien käsittelyyn tarkoitetut kemikaalit. Alumiinipohjaiset saostusaineet Chemicals used for treatment of swimming pool water. Aluminium based coagulants SFS-EN 15031:en:2006 SFS-EN 15072:en, Uima-allasvesien käsittelyyn tarkoitetut kemikaalit. Natriumdikloori-isosyanuraatti, vedetön Chemicals used for treatment of swimming pool water. Sodium dichloroisocyanurate, anhydrous SFS-EN A1:en:2008 SFS-EN 15073:en, Uima-allasvesien käsittelyyn tarkoitetut kemikaalit. Natriumdikloori-isosyanuraatti, dihydraatti Chemicals used for treatment of swimming pool water. Sodium dichloroisocyanurate, dihydrate SFS-EN A1:en:2008 SFS-EN 16370:en, Chemicals used for treatment of water intended for human consumption. Sodium chloride for on site electrochlorination using membrane cells SFS-EN 16380:en, Chemicals used for treatment of swimming pool water. Potassium peroxomonosulfate SFS-EN 16381:en, Chemicals used for treatment of swimming pool water. Sodium peroxodisulfate SFS-EN 16399:en, Chemicals used for treatment of swimming pool water. Sodium thiosulfate SFS-EN 16400:en, Chemicals used for treatment of swimming pool water. Hydrogen peroxide 17

18 SFS-EN 16401:en, Chemicals used for treatment of swimming pool water. Sodium chloride used for electrochlorinator systems SFS-EN 16409:en, Chemicals used for treatment of water intended for human consumption. Dolomitic lime SFS-EN 936:en, Chemicals used for treatment of water intended for human consumption. Carbon dioxide SFS-EN 936:en: Maakaasu SFS-EN ISO 13686:en, Maakaasu. Laadun merkintä Natural gas. Quality designation (ISO 13686:2013) SFS-EN ISO 13686:en:2006 SFS-EN ISO 13734:en, Maakaasu. Hajusteena käytettävät orgaaniset rikkiyhdisteet. Vaatimukset ja testausmenetelmät Natural gas. Organic components used as odorants. Requirements and test methods (ISO 13734:2013) SFS-EN ISO 13734:en: Öljytuotteet, yleistä SFS-EN ISO 13736:en, Leimahduspisteen määrittäminen. Abelin umpikuppimenetelmä Determination of flash point. Abel closed-cup method (ISO 13736:2013) SFS-EN ISO 13736:en: Vahat, bitumipitoiset aineet ja muut öljytuotteet SFS-EN :en, Bitumisissa seoksissa käytettävien fillerikiviainesten testaus. Osa 1: Pehmenemispisteen muutos. Rengas-kuula testi Tests for filler aggregate used in bituminous mixtures. Part 1: Delta ring and ball test SFS-EN :en:2000 SFS-EN 1429:en, Bitumi ja bitumiset sideaineet. Modifoimattoman bitumiemulsion seulontajäännöksen määritys Bitumen and bituminous binders. Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving SFS-EN 1429:en: Polttoaineet SFS-EN A1:en, Liquid petroleum products. Fatty acid methyl esters (FAME) for use in diesel engines and heating applications. Requirements and test methods SFS-EN 14214:en:2013 SFS-EN 15721:en, Etanoli moottoribensiinin seoskomponenttina. Korkeampien alkoholien, metanolin ja muiden epäpuhtauksien määritys. Kaasukromatografinen menetelmä Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and other impurities. Gas chromatographic method SFS-EN 15721:en:2009 SFS-EN A1:en, Petroleum products and fat and oil derivates. Fatty acid methyl esters (FAME) for diesel engines. Determination of polyunsaturated (=4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography SFS-EN 15779:en:2010 SFS-EN 16329:en, Diesel- ja lämmityspolttoöljyt. Suodatettavuuden rajalämpötilan määritys. Lineaarinen jäähdytyskylpymenetelmä Diesel and domestic heating fuels. Determination of cold filter plugging point. Linear cooling bath method SFS-EN 16423:en, Nestekaasu. Liuenneen kiintoaineen määritys kaasukromatografisella suorasyöttömenetelmällä Liquefied petroleum gases. Determination of dissolved residue. Gas chromatographic method using liquid, on-column injection SFS-EN ISO 4264/A1:en, Öljytuotteet. Keskitisleiden setaani-indeksin laskenta käyttäen neljän muuttujan yhtälöä Petroleum products. Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:2007/Amd 1:2013) Öljy- ja maakaasuteollisuuden laitteet SFS-EN ISO 11960:en, Öljy- ja maakaasuteollisuus. Porauskaivon koteloinnissa ja putkituksessa käytettävät teräsputket (ISO 11960:2011) Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells (ISO 11960:2014) SFS-EN ISO 11960:en:2012 SFS-EN ISO 14998:en, Petroleum and natural gas industries. Downhole equipment. Completion accessories (ISO 14998:2013) SFS-EN ISO 19900:en, Petroleum and natural gas industries. General requirements for offshore structures (ISO 19900:2013) SFS-EN ISO 19900:en:2003 SFS-EN ISO :en, Öljy- ja maakaasuteollisuus. Erikoisvaatimukset merirakenteille. Osa 7: Kelluvien poraus- ja tuotantolauttojen paikkavakavoittamisjärjestelmät Petroleum and natural gas industries. Specific requirements for offshore structures. Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO :2013) SFS-EN ISO :en:2006 SFS-EN ISO 19902/A1:en, Öljy- ja maakaasuteollisuus. Kiinteät teräksiset merirakenteet Petroleum and natural gas industries. Fixed steel offshore structures (ISO 19902:2007/Amd 1:2013) SFS-EN ISO 8311:en, Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. Calibration of membrane tanks and independent prismatic tanks in ships. Manual and internal electro-optical distance-ranging methods (ISO 8311:2013) SFS-EN ISO 8311: Öljytuotteiden ja maakaasun käsittelylaitteet SFS 3352, Palavien nesteiden jakeluasema Service station for flammable liquids Julkaisukieli: fi SFS 3352/AC:2011 SFS AC:2010 SFS AC:sv:2010 SFS 3352:sv, Distributionsstation för brännbara vätskor Palavien nesteiden jakeluasema Julkaisukieli: sv SFS AC:2010 SFS AC:sv:2010 SFS 3352/AC:2011 SFS-EN 14125:en, Jakeluasemien maanalaiset kestomuoviset ja metalliset käyttöputkistot Thermoplastic and flexible metal pipework for underground installation at petrol filling stations SFS-EN 14125/A1:en:2007 SFS-EN 14125:en:2005 SFS-EN 1594:en, Kaasuputkistot. Maksimikäyttöpaine yli 16 bar. Toiminnalliset vaatimukset Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements SFS-EN 1594:en: Metallien rikkova aineenkoetus SFS-EN ISO 20482:en, Metallilevyjen ja -nauhojen Erichsenin kuppi- 18

19 venytyskoe Metallic materials. Sheet and strip. Erichsen cupping test (ISO 20482:2013) SFS-EN ISO 20482:2003 SFS-EN ISO 20482:en:2003 SFS-EN ISO 8492, Metalliputkien litistyskoe Metallic materials. Tube. Flattening test (ISO 8492:2013) SFS-EN ISO 8492:2004 SFS-EN ISO 8492:en:2004 SFS-EN ISO 8492:en, Metalliputkien litistyskoe Metallic materials. Tube. Flattening test (ISO 8492:2013) SFS-EN ISO 8492:2004 SFS-EN ISO 8492:en:2004 SFS-EN ISO 8494, Metalliputkien laipoituskoe Metallic materials. Tube. Flanging test (ISO 8494:2013) SFS-EN ISO 8494:2004 SFS-EN ISO 8494:en:2004 SFS-EN ISO 8494:en, Metalliputkien laipoituskoe Metallic materials. Tube. Flanging test (ISO 8494:2013) SFS-EN ISO 8494:2004 SFS-EN ISO 8494:en:2004 SFS-EN ISO 8495, Metalliputkien rengaslaajennuskoe Metallic materials. Tube. Ring-expanding test (ISO 8495:2013) SFS-EN ISO 8495:2004 SFS-EN ISO 8495:en:2004 SFS-EN ISO 8495:en, Metalliputkien rengaslaajennuskoe Metallic materials. Tube. Ring-expanding test (ISO 8495:2013) SFS-EN ISO 8495:2004 SFS-EN ISO 8495:en:2004 SFS-EN ISO 8496, Metalliputkien rengasvetokoe Metallic materials. Tube. Ring tensile test (ISO 8496:2013) SFS-EN ISO 8496:2004 SFS-EN ISO 8496:en:2004 SFS-EN ISO 8496:en, Metalliputkien rengasvetokoe Metallic materials. Tube. Ring tensile test (ISO 8496:2013) SFS-EN ISO 8496:2004 SFS-EN ISO 8496:en: Metallien rikkomaton aineenkoetus (NDT) SFS-EN ISO 5579, Rikkomaton aineenkoetus. Metallisten materiaalien radiografinen kuvaus käyttäen filmitekniikkaa ja rontgen- tai gammasäteilyä. Perusohjeet Non-destructive testing. Radiographic testing of metallic materials using film and X- or gamma rays. Basic rules (ISO 5579:2013) SFS-EN 444:1994 SFS-EN 444:en:1994 SFS-EN ISO 5579:en, Rikkomaton aineenkoetus. Metallisten materiaalien radiografinen kuvaus käyttäen filmitekniikkaa ja rontgen- tai gammasäteilyä. Perusohjeet Non-destructive testing. Radiographic testing of metallic materials using film and X- or gamma rays. Basic rules (ISO 5579:2013) SFS-EN 444:1994 SFS-EN 444:en: Metallien korroosio SFS-EN 12473:en, Yleisperiaatteet katodiselle suojaukselle merivedessä General principles of cathodic protection in seawater SFS-EN 12473:en: Teräslanka, -köysi ja -ketju SFS-EN :en, Teräslanka ja -lankatuotteet aitaustarkoituksiin. Osa 3: Kuusikulmioverkot teknisiin tarkoituksiin Steel wire and wire products for fencing and netting. Part 3: Hexagonal steel wire mesh products for civil engineering purposes SFS-EN :en:1998 SFS-EN :en, Teräslanka ja -lankatuotteet aitaustarkoituksiin. Osa 8: Hitsatut kivikorituotteet Steel wire and wire products for fencing and netting. Part 8: Welded mesh gabion products Teräsputket erikoiskäyttöön SFS-EN , toimitusehdot. Osa 1: Seostamattomat teräsputket huoneenlämpötiloihin Technical delivery conditions. Part 1: Non-alloy steel tubes with specified room temperature properties SFS-EN :en:2002 SFS-EN /A1:en:2004 SFS-EN A1:2004 SFS-EN :en, toimitusehdot. Osa 1: Seostamattomat teräsputket huoneenlämpötiloihin Technical delivery conditions. Part 1: Non-alloy steel tubes with specified room temperature properties SFS-EN A1:2004 SFS-EN /A1:en:2004 SFS-EN :en:2002 SFS-EN , toimitusehdot. Osa 2: Kuumalujat seostamattomat ja seostetut teräsputket Technical delivery conditions. Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties SFS-EN A1 + A2:en:2007 SFS-EN A1 + A2:2007 SFS-EN :en, toimitusehdot. Osa 2: Kuumalujat seostamattomat ja seostetut teräsputket Technical delivery conditions. Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties SFS-EN A1 + A2:2007 SFS-EN A1 + A2:en:2007 SFS-EN , toimitusehdot. Osa 3: Seostetut hienoraeteräsputket Technical delivery conditions. Part 3: Alloy fine grain steel tubes SFS-EN A1:2004 SFS-EN /A1:en:2004 SFS-EN :en:2002 SFS-EN :en, toimitusehdot. Osa 3: Seostetut hienoraeteräsputket Technical delivery conditions. Part 3: Alloy fine grain steel tubes SFS-EN A1:2004 SFS-EN :en:2002 SFS-EN /A1:en:2004 SFS-EN , toimitusehdot. Osa 4: Seostamattomat ja seostetut teräsputket mataliin käyttölämpötiloihin Technical delivery conditions. Part 4: Non-alloy and alloy steel tubes with specified low tem- 19

20 perature properties SFS-EN A1:2004 SFS-EN /A1:en:2004 SFS-EN :en:2002 SFS-EN :en, toimitusehdot. Osa 4: Seostamattomat ja seostetut teräsputket mataliin käyttölämpötiloihin Technical delivery conditions. Part 4: Non-alloy and alloy steel tubes with specified low temperature properties SFS-EN A1:2004 SFS-EN /A1:en:2004 SFS-EN :en:2002 SFS-EN , toimitusehdot. Osa 5: Ruostumattomat teräsputket Technical delivery conditions. Part 5: Stainless steel tubes SFS-EN :2005 SFS-EN /AC:en:2008 SFS-EN :en:2005 SFS-EN :en, toimitusehdot. Osa 5: Ruostumattomat teräsputket Technical delivery conditions. Part 5: Stainless steel tubes SFS-EN :2005 SFS-EN /AC:en:2008 SFS-EN :en:2005 SFS-EN ISO 11960:en, Öljy- ja maakaasuteollisuus. Porauskaivon koteloinnissa ja putkituksessa käytettävät teräsputket (ISO 11960:2011) Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells (ISO 11960:2014) SFS-EN ISO 11960:en: Kuparituotteet SFS-EN 13599, Kupari ja kupariseokset. Kuparilevyt ja -nauhat sähkötekniseen käyttöön Copper and copper alloys. Copper plate, sheet and strip for electrical purposes SFS-EN 13599:2002 SFS-EN 13599:en:2002 SFS-EN 13599:en, Kupari ja kupariseokset. Kuparilevyt ja -nauhat sähkötekniseen käyttöön Copper and copper alloys. Copper plate, sheet and strip for electrical purposes SFS-EN 13599:2002 SFS-EN 13599:en: Puulevyt SFS-EN :en, Composites made from cellulose-based materials and thermoplastics (usually called woodpolymer composites (WPC) or natural fibre composites (NFC)). Part 1: Test methods for characterisation of compounds and products CEN/TS :en:2007 SFS-EN :en, Composites made from cellulose-based materials and thermoplastics (usually called woodpolymer composites (WPC) or natural fibre composites (NFC)). Part 4: Specifications for decking profiles and tiles CEN/TS :en:2007 SFS-EN :en, Composites made from cellulose-based materials and thermoplastics (usually called woodpolymer composites (WPC) or natural fibre composites (NFC)). Part 5: Specifications for cladding profiles and tiles CEN/TS :en: Puiset puolivalmisteet SFS-EN :en, Composites made from cellulose-based materials and thermoplastics (usually called woodpolymer composites (WPC) or natural fibre composites (NFC)). Part 1: Test methods for characterisation of compounds and products CEN/TS :en:2007 SFS-EN :en, Composites made from cellulose-based materials and thermoplastics (usually called woodpolymer composites (WPC) or natural fibre composites (NFC)). Part 4: Specifications for decking profiles and tiles CEN/TS :en:2007 SFS-EN :en, Composites made from cellulose-based materials and thermoplastics (usually called woodpolymer composites (WPC) or natural fibre composites (NFC)). Part 5: Specifications for cladding profiles and tiles CEN/TS :en: Puuntyöstökoneet ja puutyökalut SFS-EN :en, Puuntyöstökoneiden turvallisuus. Pyörösahat. Osa 19: Pöytäpyörösahat (liukupöydällä tai ilman) ja rakennussahat Safety of woodworking machines. Circular sawing machines. Part 19: Circular saw benches (with and without sliding table) and building site saws SFS-EN A1:2009 SFS-EN A1:en: Lasi SFS-EN :en, Rakennuslasit. U-muotoinen lämpökarkaistu soodakalkkisilikaattiturvalasi. Osa 2: Vaatimustenmukaisuuden arviointi/tuotestandardi Glass in building. Thermally toughened soda lime silicate channel shaped safety glass. Part 2: Evaluation of conformity/product standard Muovit ja niiden testausmenetelmät SFS-EN :en, Composites made from cellulose-based materials and thermoplastics (usually called woodpolymer composites (WPC) or natural fibre composites (NFC)). Part 1: Test methods for characterisation of compounds and products CEN/TS :en:2007 SFS-EN ISO :en, Plastics. Development and use of intermediatescale fire tests for plastics products. Part 1: General guidance (ISO :2014) SFS-EN ISO :en: Kestomuovit SFS-EN ISO 306:en, Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST) (ISO 306:2013) SFS-EN ISO 306:2005 SFS-EN ISO 306:en: Kumi- ja muovituotteet, yleistä SFS-EN ISO :en, Plastics. Development and use of intermediatescale fire tests for plastics products. Part 1: General guidance (ISO :2014) SFS-EN ISO :en: Kalvot ja levyt SFS-EN 16240:en, Valoa läpäisevät sileät polykarbonaattikatteet sisä- ja vesikattoihin, seiniin ja alakattoihin. Vaatimukset ja testausmenetelmät Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods Muut kumi- ja muovituotteet SFS-EN :en, Composites made from cellulose-based materials and thermoplastics (usually called woodpolymer composites (WPC) or natural fibre composites (NFC)). Part 1: Test methods for characterisation of compounds and products CEN/TS :en:2007 SFS-EN :en, Composites made from cellulose-based materials and thermoplastics (usually called woodpolymer composites (WPC) or natural fibre composites (NFC)). Part 4: Specifications for 20