SFS-EN 17054:2019:en, Biometrics multilingual vocabulary based upon the English version of ISO/IEC :2012 Julkaisukieli: en

Transkriptio

1 1 SFS:n luettelo 3/2019 Sisällys Uudet SFS-standardit s. 1 Kumotut SFS-standardit s. 69 Uudet CENin julkaisut s. 77 WTO-tietopiste s. 81 Uudet SFS-standardit Tässä luettelossa mainitaan huhti-toukokuussa 2019 vahvistetut SFS-standardit SFS-ICS-ryhmittäin. Merkintä /A1 tunnuksen lopussa tarkoittaa, että kyseessä on lisäys A1 alkuperäiseen standardiin. Merkintä +A1 tunnuksen lopussa tarkoittaa, että standardi sisältää muutoksen A 1. Standardin tunnuksen jälkeen on mainittu vahvistuspäivä. Standardit, jotka uusi standardi korvaa, on mainittu kunkin uuden standardin tiedoissa. Standardeja voi ladata omalle koneelle sekä tilata painettuna tai pdf-tiedostona SFS:n verkkokaupasta sales.sfs.fi. Niitä voi tilata myös SFS:n asiakaspalvelusta (sales@sfs.fi tai puh ). Englanninkieliset versiot julkaistaan noin viikon kuluttua vahvistamispäivästä. Osa standardeista käännetään suomeksi. Niiden julkaisuaikataulun voi tarkistaa SFS:n tietopalvelusta (info@sfs.fi). Osa standardeista liittyy CE-merkintää edellyttäviin uuden lähestymistavan direktiiveihin Tietotekniikka. Toimistotekniikka (Sanastot) SFS-EN 17054:2019:en, Biometrics multilingual vocabulary based upon the English version of ISO/IEC : Tekstiili- ja nahkateollisuus (Sanastot) SFS-EN ISO 9092:2019:en, Nonwovens. Vocabulary (ISO 9092:2019) SFS-EN ISO 9092:2012 SFS-EN ISO 9092:en: Maa- ja metsätalous (Sanastot) SFS-EN :2019:en, Fertilizers and liming materials. Vocabulary. Part 3: Terms relating to liming materials SFS-EN :2002 SFS-EN :en:2002

2 Maali- ja väriteollisuus (Sanastot) SFS-EN ISO :2019:en, Coating powders. Part 14: Vocabulary (ISO :2019) SFS-EN ISO :en: Suureet ja yksiköt SFS-EN IEC :2019:en, Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics SFS-EN :en: Koneenpiirustus SFS-EN ISO 2553:2019:en, Hitsaus ja sen lähiprosessit. Piirustusmerkinnät. Hitsausliitokset Welding and allied processes. Symbolic representation on drawings. Welded joints (ISO 2553:2019) SFS-EN ISO 2553:2014 SFS-EN ISO 2553:2014/AC:2017:2017 SFS-EN ISO 2553:en: Rakennuspiirustus SFS-EN ISO 8560:2019:en, Technical drawings. Construction drawings. Representation of modular sizes, lines and grids (ISO 8560:2019) SFS-EN ISO 8560:en: Informatiikka SFS-ISO 26324:2019, Tieto ja dokumentointi. Digitaalinen objektien tunnistejärjestelmä (DOI) Information and documentation -- Digital object identifier system Julkaisukieli: fi/en SFS-ISO 26324:2019:en, Tieto ja dokumentointi. Digitaalinen objektien tunnistejärjestelmä (DOI) Information and documentation -- Digital object identifier system

3 Teollisuuden palvelut SFS-INSTA 800-1:2019, Siivouksen tekninen laatu. Osa 1: Siivouksen teknisen laadun määrittely- ja arviointijärjestelmä (INSTA 800-1:2018) Cleaning quality. Part 1: System for establishing and assessing cleaning quality Julkaisukieli: fi/en SFS 5994:2012 SFS-INSTA 800-2:2019, Siivouksen tekninen laatu. Osa 2: Standardia INSTA käyttävien yritysten ja henkilöiden sertifiointi. Vaatimustenmukaisuuden osoittaminen (INSTA 800-2:2018) Cleaning quality. Part 2: Certification of companies and persons using INSTA Requirements for attestation and conformity Julkaisukieli: fi/en SFS 5994: Elintarvikemikrobiologia SFS-EN ISO :2019:en, Microbiology of the food chain. Requirements and guidelines for conducting challenge tests of food and feed products. Part 1: Challenge tests to study growth potential, lag time and maximum growth rate (ISO :2019) Muut mikrobiologiaan liittyvät standardit SFS-EN ISO 846:2019:en, Plastics. Evaluation of the action of microorganisms (ISO 846:2019) SFS-EN ISO 846:en: Terveydenhuollon laitteet, yleistä SFS-EN V2.2.1:2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. Part 27: Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P). Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU Verensiirto-, infuusio- ja injektiolaitteet SFS-EN ISO :2004/A1:2019:en,

4 4 Suonensisäisten ja lääkekäyttöön tarkoitettujen laitteiden elastomeeriset osat. Osa 3: Hiukkaspäästölaskennan määrittäminen Elastomeric parts for parenterals and for devices for pharmaceutical use. Part 3: Determination of releasedparticle count. Amendment 1 (ISO :2003/Amd 1:2018) Hammashoitovälineet SFS-EN ISO 7492:2019:en, Hammaslääketiede. Koetinvälineet Dentistry. Dental explorer (ISO 7492:2019) SFS-EN ISO 7492:2018:en:2018 SFS-EN ISO 9873:2019:en, Hammaslääketiede. Hammaspeilit Dentistry. Intra-oral mirrors (ISO 9873:2019) SFS-EN ISO 9873:2017:en: Sterilointi ja desinfiointi, yleistä SFS-EN ISO :2019:en, Terveydenhuollon tuotteiden sterilointi. Biologiset indikaattorit. Osa 7: Ohjeita valintaan, käyttöön ja tulosten tulkintaan Sterilization of health care products. Biological indicators. Part 7: Guidance for the selection, use and interpretation of results (ISO :2019) SFS-EN ISO 14161:en: In vitro -diagnostiset testit SFS-EN ISO :2019:en, In vitro -diagnostiikkaan tarkoitetut molekyylibiologiset tutkimukset. Laskimokokoveren valmisteluprosessin määrittely. Osa 1: RNA:n eristys solusta Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for venous whole blood. Part 1: Isolated cellular RNA (ISO :2019) SFS-EN ISO :2019:en, In vitro -diagnostiikkaan tarkoitetut molekyylibiologiset tutkimukset. Laskimokokoveren valmisteluprosessin määrittely. Osa 2: Genomisen DNA:n eristys solusta Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for venous whole blood. Part 2: Isolated genomic DNA (ISO :2019)

5 Sairaalalaitteet ja -tarvikkeet SFS-EN :2019:en, Leikkausasut ja -liinat. Vaatimukset ja testimenetelmät. Osa 1: Leikkaustakit ja -liinat Surgical clothing and drapes. Requirements and test methods. Part 1: Surgical drapes and gowns SFS-EN A1:2013 SFS-EN A1:en:2013 SFS-EN :2019:en, Leikkausasut ja -liinat. Vaatimukset ja testimenetelmät. Osa 2: Puhdasilmapuvut Surgical clothing and drapes. Requirements and test methods. Part 2: Clean air suits SFS-EN A1:2013 SFS-EN A1:en:2013 SFS-EN 14683:2019:en, Leikkauskasvonsuojat. Vaatimukset ja testimenetelmät Medical face masks. Requirements and test methods SFS-EN 14683:en: Ympäristön pilaantuminen ja suojelu SFS-EN ISO :2019:en, Kasvihuonekaasut. Osa 2: Määrittelyt ja opastusta kasvihuonekaasujen päästövähennysten ja poistojen lisäysten laskennasta, seurannasta ja raportoinnista projektitasolla Greenhouse gases. Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO :2019) SFS-EN ISO :en:2012 SFS-EN ISO :2019:en, Kasvihuonekaasut. Osa 3: Määrittelyt ja opastusta kasvihuonekaasuja koskevien väittämien todentamisesta ja validoinnista Greenhouse gases. Part 3: Specification with guidance for the verification and validation of greenhouse gas statements (ISO :2019) SFS-EN ISO :en:2012

6 Ulkoilma SFS-EN 16868:2019:en, Ambient air. Sampling and analysis of airbone pollen grains and fungal spores for networks related to allergy. Volumetric Hirst method Työpaikan ilma SFS-EN :2019:en, Altistuminen työpaikalla. Pölyävyysmittaus materiaaleille, jotka sisältävät tai joista vapautuu nanokappaleita tai alle mikrometrikokoluokan hiukkasia. Osa 1: Mittausmenetelmien vaatimukset ja valinta Workplace exposure. Measurement of dustiness of bulk materials that contain or release respirable NOAA and other respirable particles. Part 1: Requirements and choice of test methods SFS-EN :2019:en, Altistuminen työpaikalla. Pölyävyysmittaus materiaaleille, jotka sisältävät tai joista vapautuu nanokappaleita tai alle mikrometrikokoluokan hiukkasia. Osa 2: Pyörivän rummun menetelmä Workplace exposure. Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles. Part 2: Rotating drum method SFS-EN :2019:en, Altistuminen työpaikalla. Pölyävyysmittaus materiaaleille, jotka sisältävät tai joista vapautuu nanokappaleita tai alle mikrometrikokoluokan hiukkasia. Osa 3: Jatkuvan pudotuksen menetelmä Workplace exposure. Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles. Part 3: Continuous drop method SFS-EN :2019:en, Altistuminen työpaikalla. Pölyävyysmittaus materiaaleille, jotka sisältävät tai joista vapautuu nanokappaleita tai alle mikrometrikokoluokan hiukkasia. Osa 4: Pienen pyörivän rummun menetelmä Workplace exposure. Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles. Part 4: Small rotating drum method SFS-EN :2019:en, Altistuminen työpaikalla. Pölyävyysmittaus materiaaleille, jotka sisältävät tai joista vapautuu nanokappaleita tai alle mikrometrikokoluokan hiukkasia. Osa 5: Vortex-ravistelijamenetelmä Workplace exposure. Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles. Part 5: Vortex shaker method SFS-EN 689: AC:2019:en, Workplace exposure. Measurement of exposure by inhalation to chemical agents. Strategy for testing compliance with occupational exposure limit values

7 7 SFS-EN 689:2018:en: Kiinteät päästölähteet SFS-EN :2019:en, High efficiency air filters (EPA, HEPA and ULPA). Part 1: Classification, performance testing, marking SFS-EN :en: Kemiallisten aineiden analysoiminen vedestä SFS-EN ISO 12010:2019:en, Water quality. Determination of short-chain polychlorinated alkanes (SCCP) in water. Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO 12010:2019) SFS-EN ISO 12010:en: Veden fysikaalisten ominaisuuksien tutkiminen SFS-EN ISO 10704:2019:en, Water quality. Gross alpha and gross beta activity. Test method using thin source deposit (ISO 10704:2019) SFS-EN ISO 10704:en: Veden biologisten ominaisuuksien tutkiminen SFS-EN 17204:2019:en, Water quality. Guidance on analysis of mesozooplankton from marine and brackish waters SFS-EN 17218:2019:en, Water quality. Guidance on sampling of mesozooplankton from marine and brackish water using mesh Muut maaperän laatuun liittyvät standardit SFS-ISO 15799:2019:en, Soil quality -- Guidance on the ecotoxicological characterization of soils and soil materials SFS-ISO 15799:en:2006

8 Koneturvallisuus SFS-EN ISO 13851:2019:en, Koneturvallisuus. Kaksinkäsinhallintalaitteet. Suunnittelu- ja valintaperiaatteet Safety of machinery. Two-hand control devices. Principles for design and selection (ISO 13851:2019) SFS-EN A1:2008 SFS-EN A1:en: Kodin turvallisuus SFS-EN :2015/A2:2019:en, Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use Ergonomia SFS-EN ISO 27501:2019:en, The human-centred organization. Guidance for managers (ISO 27501:2019) SFS-EN ISO :2019:en, Ergonomics of human-system interaction. Part 220: Processes for enabling, executing and assessing humancentred design within organizations (ISO :2019) Palosuojelu SFS-EN :2019:en, Kiinteät palonsammutusjärjestelmät. Sprinkleri- ja vesivalelulaitteistojen komponentit. Osa 9: Ennakkolaukaisuventtiilit Fixed firefighting systems. Components for sprinkler and water spray systems. Part 9: Deluge alarm valves SFS-EN :2019:en, Fixed firefighting systems. Foam systems. Part 1: Requirements and test methods for components SFS-EN A1:en:2008 SFS-EN : AC:2019:en, Fixed firefighting systems. Foam systems. Part 2: Design, construction and maintenance SFS-EN :2018:en:2018

9 9 SFS-EN :2019:en, Fixed firefighting systems. Gas extinguishing systems. Part 1: Design, installation and maintenance (ISO :2015, modified) SFS-EN :2008 SFS-EN :en:2008 SFS-EN :2019:en, Fixed firefighting systems. Condensed aerosol extinguishing systems. Part 1: Requirements and test methods for components CEN/TR :en:2009 SFS-EN :2019:en, Fixed firefighting systems. Condensed aerosol extinguishing systems. Part 2: Design, installation and maintenance CEN/TR :en:2009 CEN/TR :fi:2009 SFS-EN 54-3: A1:2019:en, Fire detection and fire alarm systems. Part 3: Fire alarm devices. Sounders SFS-EN 54-3:en: Aineiden ja tuotteiden syttyvyys ja palo-ominaisuudet SFS-EN :2019:en, Secure storage units. Classification and methods of test for resistance to fire. Part 2: Data rooms and data container SFS-EN A1:en: Rakennusmateriaalien ja -elementtien palonkesto SFS-EN :2019:en, Fire resistance tests for service installations. Part 13: Chimneys

10 Säteilyltä suojautuminen SFS-EN ISO 10704:2019:en, Water quality. Gross alpha and gross beta activity. Test method using thin source deposit (ISO 10704:2019) SFS-EN ISO 10704:en: Vaarallisilta aineilta suojautuminen SFS-EN :2019:en, Tehdasvalmisteiset terässäiliöt. Osa 3: Maanalaiset, sylinterimäiset, makaavat yksi- ja kaksoisvaippasäiliöt palaville ja palamattomille vesiä pilaaville nesteille rakennusten lämmitykseen tai jäähdytykseen Workshop fabricated steel tanks. Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for heating and cooling of buildings SFS-EN :2003 SFS-EN :en: Rikosten torjunta SFS-EN :2019:en, Secure storage units. Classification and methods of test for resistance to fire. Part 2: Data rooms and data container SFS-EN A1:en:2013 SFS-EN :2019:en, Secure storage units. Requirements, classification and methods of test for resistance to burglary. Part 1: Safes, ATM safes, strongroom doors and strongrooms SFS-EN :en: Hälytys- ja varoitusjärjestelmät SFS-EN :2019:en, Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices SFS-EN :en:2009 SFS-EN :2019:en, Alarm systems - Intrusion and hold-up systems - Part 8: Security fog devices

11 11 SFS-EN :en: Suojavaatetus SFS-EN 943-1: A1:2019:en, Suojavaatetus nestemäisiä ja kaasumaisia kemikaaleja vastaan mukaan lukien nestemäiset aerosolit ja kiinteät partikkelit. Osa 1: Suojausvaatimukset ilmanvaihdolla varustetuille ja ilman ilmanvaihtoa oleville kaasutiiviille (tyyppi 1) kemikaalinsuojapuvuille Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols. Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits SFS-EN 943-1:en:2015 SFS-EN 943-2:2019:en, Suojavaatetus vaarallisia, kiinteitä, nestemäisiä ja kaasumaisia kemikaaleja vastaan, mukaan lukien nestemäiset ja kiinteät aerosolit. Osa 2: Vaatimukset pelastusjoukkojen kaasutiiviille (tyyppi 1) kemikaalinsuojapuvuille Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols. Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for emergency teams (ET) SFS-EN 943-2:2002 SFS-EN 943-2:en: Jalkojen ja säärien suojaus SFS-EN ISO :2019:en, Foot and leg protectors. Requirements and test methods for footwear components. Part 1: Metallic toecaps (ISO :2019) SFS-EN 12568:2010 SFS-EN 12568:en:2010 SFS-EN ISO :2019:en, Foot and leg protectors. Requirements and test methods for footwear component. Part 2: Non-metallic toecaps (ISO :2019) SFS-EN 12568:2010 SFS-EN 12568:en:2010 SFS-EN ISO :2019:en, Foot and leg protectors. Requirements and test methods for footwear components. Part 3: Metallic perforation resistant inserts (ISO :2019)

12 12 SFS-EN 12568:2010 SFS-EN 12568:en:2010 SFS-EN ISO :2019:en, Foot and leg protectors. Requirements and test methods for footwear components. Part 4: Non-metallic perforation resistant inserts (ISO :2019) SFS-EN 12568:2010 SFS-EN 12568:en: Pituus- ja kulmamittaus, yleistä SFS-EN ISO 20170:2019:en, Geometrical product specifications (GPS). Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019) Pintojen ominaisuudet SFS-EN ISO :2019:en, Geometrical product specifications (GPS). Surface texture: Areal. Part 600: Metrological characteristics for areal-topography measuring methods (ISO :2019) SFS-EN ISO :2019:en, Geometrical product specifications (GPS). Surface texture: Areal. Part 607: Nominal characteristics of noncontact (confocal microscopy) instrumentss (ISO :2018) Geometrinen tuotemäärittely (GPS) SFS-EN ISO 20170:2019:en, Geometrical product specifications (GPS). Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019) Akustiset mittaukset ja meluntorjunta yleensä SFS-EN ISO 3740:2019:en, Acoustics. Determination of sound power levels of noise sources. Guidelines for the use of basic standards (ISO 3740:2019) SFS-EN ISO 3740:en:2001

13 Koneiden ja laitteiden aiheuttama melu SFS-EN :2019:en, Lämmitykseen ja jäähdytykseen tarkoitetut, sähkökäyttöisellä kompressorilla toimivat huoneilmastointikoneet, nesteenjäähdytyskoneet, lämpöpumput ja kuivaajat. Ilman mukana kulkeutuvan äänen mittaaminen. Äänitehotason määrittäminen. Osa 2: Lämpöpumppujen vedenlämmittimet Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors. Determination of the sound power level. Part 2: Heat pump water heaters SFS-EN :2013/A1:2019:en, Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers Kulkuneuvojen aiheuttama melu SFS-EN 15610:2019:en, Kiskoliikenne. Akustiikka. Kiskon ja pyörän karheusmittaus vierintämelun määrittämiseksi Railway applications. Acoustics. Rail and wheel roughness measurement related to noise generation SFS-EN 15610:en: Muut sähköön ja magnetismiin liittyvät standardit SFS-EN :2017/A1:2019:en, Specification for plastic films for electrical purposes - Part 2: Methods of test SFS-EN IEC :2019:en, Dielectric and resistive properties of solid insulating materials - Part 3-4: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity at elevated temperatures Rikkomaton aineenkoetus SFS-EN ISO 15549:2019:en, Rikkomaton aineenkoetus. Pyörrevirtatarkastus. Yleisohjeet Non-destructive testing. Eddy current testing. General principles (ISO 15549:2019) SFS-EN ISO 15549:en:2011 SFS-EN ISO :2019:en,

14 14 Non-destructive testing. Radiation methods for computed tomography. Part 1: Terminology (ISO :2017) SFS-EN :en:2011 SFS-EN ISO :2019:en, Non-destructive testing. Radiation methods for Computed tomography. Part 2: Principles, equipment and samples (ISO :2017) SFS-EN :en:2011 SFS-EN ISO :2019:en, Non-destructive testing. Radiation methods for computed tomography. Part 3: Operation and interpretation (ISO :2017) SFS-EN :en:2011 SFS-EN ISO :2019:en, Non-destructive testing. Radiation methods for computed tomography. Part 4: Qualification (ISO :2017) SFS-EN :en: Kiinteästi asennetut säiliöt SFS-EN :2019:en, Tehdasvalmisteiset terässäiliöt. Osa 3: Maanalaiset, sylinterimäiset, makaavat yksi- ja kaksoisvaippasäiliöt palaville ja palamattomille vesiä pilaaville nesteille rakennusten lämmitykseen tai jäähdytykseen Workshop fabricated steel tanks. Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for heating and cooling of buildings SFS-EN :2003 SFS-EN :en: Painelaitteet SFS-EN :2014/A7:2019, Lämmittämättömät painesäiliöt. Osa 3: Suunnittelu Unfired pressure vessels. Part 3: Design Julkaisukieli: fi/en

15 15 SFS-EN :2014/A7:2019:en, Lämmittämättömät painesäiliöt. Osa 3: Suunnittelu Unfired pressure vessels. Part 3: Design SFS-EN :2014/A8:2019, Lämmittämättömät painesäiliöt. Osa 3: Suunnittelu Unfired pressure vessels. Part 3: Design Julkaisukieli: fi/en SFS-EN :2014/A8:2019:en, Lämmittämättömät painesäiliöt. Osa 3: Suunnittelu Unfired pressure vessels. Part 3: Design Kryolaitteet SFS-EN ISO 23208:2019:en, Kryogeeniset säiliöt. Puhtaus Cryogenic vessels. Cleanliness for cryogenic service (ISO 23208:2017) SFS-EN 12300:en:1999 SFS-EN 12300/A1:en: Putkistot ja niiden osat, yleistä SFS-EN :2019:en, Maahankaivettujen putkistojen rakennesuunnittelu erilaisissa kuormitusolosuhteissa. Osa 1: Yleiset vaatimukset Structural design of buried pipelines under various conditions of loading. Part 1: General requirements SFS-EN :en:1998 SFS-EN :2017/A1:2019:en, Metallic industrial piping. Part 1: General SFS-EN :2017/A1:2019:en, Metallic industrial piping. Part 6: Additional requirements for buried piping SFS-EN :2019:en, Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Part 1: Requirements for pipes, fittings and the system

16 16 SFS-EN :en: Kaukolämpöputkistot ja niiden osat SFS-EN :2019:en, District heating pipes. Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks. Part 2: Installation SFS-EN A1:en: Rauta- ja teräsputket SFS-EN :2019:en, Hitsatut painelaiteteräsputket. Tekniset toimitusehdot. Osa 1: Sähkövastushitsatut ja jauhekaarihitsatut seostamattomat teräsputket huoneenlämpötiloihin Welded steel tubes for pressure purposes. Technical delivery conditions. Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties SFS-EN A1:2005 SFS-EN /A1:en:2005 SFS-EN :en:2002 SFS-EN :2019:en, Hitsatut painelaiteteräsputket. Tekniset toimitusehdot. Osa 2: Sähkövastushitsatut kuumalujat seostamattomat ja seostetut teräsputket Welded steel tubes for pressure purposes. Technical delivery conditions. Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties SFS-EN A1:2005 SFS-EN A1:en:2005 SFS-EN :2019:en, Hitsatut painelaiteteräsputket. Tekniset toimitusehdot. Osa 3: Sähkövastushitsatut ja jauhekaarihitsatut seostetut hienoraeteräsputket huoneenlämpötiloihin ja korotettuihin sekä mataliin käyttölämpötiloihin Welded steel tubes for pressure purposes. Technical delivery conditions. Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties SFS-EN A1:2005 SFS-EN /A1:en:2005 SFS-EN :en:2002

17 17 SFS-EN :2019:en, Hitsatut painelaiteteräsputket. Tekniset toimitusehdot. Osa 4: Sähkövastushitsatut seostamattomat teräsputket mataliin käyttölämpötiloihin Welded steel tubes for pressure purposes. Technical delivery conditions. Part 4: Electric welded non-alloy steel tubes with specified low temperature properties SFS-EN A1:2005 SFS-EN /A1:en:2005 SFS-EN :en:2002 SFS-EN :2019:en, Hitsatut painelaiteteräsputket. Tekniset toimitusehdot. Osa 5: Jauhekaarihitsatut kuumalujat seostamattomat ja seostetut teräsputket Welded steel tubes for pressure purposes. Technical delivery conditions. Part 5: Submerged arc welded nonalloy and alloy steel tubes with specified elevated temperature properties SFS-EN A1:2005 SFS-EN /A1:en:2005 SFS-EN :en:2002 SFS-EN :2019:en, Hitsatut painelaiteteräsputket. Tekniset toimitusehdot. Osa 6: Jauhekaarihitsatut seostamattomat teräsputket mataliin käyttölämpötiloihin Welded steel tubes for pressure purposes. Technical delivery conditions. Part 6: Submerged arc welded nonalloy steel tubes with specified low temperature properties SFS-EN A1:2005 SFS-EN /A1:en:2005 SFS-EN :en:2002 SFS-EN :2019:en, District heating pipes. Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks. Part 1: Design SFS-EN A1:en:2011 SFS-EN :2019:en, District heating pipes. Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks. Part 2: Installation SFS-EN A1:en:2011

18 Muoviputket SFS-EN :2019:en, Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O). Part 1: General SFS-EN :2019:en, Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O). Part 2: Pipes SFS-EN :2019:en, Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O). Part 5: Fitness for purpose of the system Muoviset putkiyhteet SFS-EN :2019:en, Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O). Part 1: General SFS-EN :2019:en, Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O). Part 5: Fitness for purpose of the system Letkut ja letkukokoonpanot SFS-EN 14423: A2:2019:en, Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar SFS-EN 14423: A1:2016:en: Venttiilit, yleistä SFS-EN 13175:2019:en, Nestekaasulaitteet ja varusteet. Nestekaasusäiliöventtiilien ja -varusteiden valmistus- ja testausvaatimukset LPG Equipment and accessories. Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings SFS-EN 13175:en:2014

19 Paineensäätimet SFS-EN 13611:2019:en, Kaasun ja nestemäisten polttoaineiden poltinten ja polttolaitteiden varo- ja säätölaitteet. Yleiset vaatimukset Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements SFS-EN 13611/AC:en:2016 SFS-EN 13611:en:2015 SFS-EN 14071: A1:2019:en, Nestekaasulaitteet ja varusteet. Nestekaasusäiliöiden varoventtiilit. Apulaitteet LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment SFS-EN 14071:en:2015 SFS-EN IEC :2019:en, Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves SFS-EN :en: Pumput SFS-EN :2019:en, Pumput. Menetelmät keskipakopumppujen energiatehokkuusindeksin kelpuutukseen ja varmentamiseen. Osa 1: Testausta koskevat yleiset vaatimukset ja menetelmät ja energiatehokkuusindeksin (EEI) laskenta Pumps. Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units. Part 1: General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI) SFS-EN :2019:en, Pumput. Menetelmät keskipakopumppujen energiatehokkuusindeksin kelpuutukseen ja varmentamiseen. Osa 2: Yksittäisten pumppuyksikköjen energiatehokkuusindeksin (EEI) testaus ja laskenta Pumps. Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units. Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units Putkisto ja liittimet SFS-EN ISO :2019:en, Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing. Part 1: Ports with truncated housing for O-ring seal (ISO :2019)

20 20 SFS-EN ISO :en: Teollisuusprosessien mittaus ja ohjaus SFS-EN IEC :2019:en, Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves SFS-EN :en:2001 SFS-EN IEC 61918:2018/A11:2019:en, Industrial communication networks - Installation of communication networks in industrial premises SFS-EN IEC :2019/A1:2019:en, Security for industrial automation and control systems - Part 2-4: Security program requirements for IACS service providers SFS-EN IEC :2019:en, Security for industrial automation and control systems - Part 2-4: Security program requirements for IACS service providers SFS-EN IEC :2019:en, Industrial communication networks - Network and system security - Part 3-3: System security requirements and security levels SFS-EN IEC :2019:en, Security for industrial automation and control systems - Part 4-2: Technical security requirements for IACS components Hioma-aineet SFS-EN 13236:2019:en, Safety requirements for superabrasive products SFS-EN A1:en:2015

21 Sähkötyökalut SFS-EN :2015/A1:2019:en, Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirements Hitsaus ja juotto SFS-EN IEC :2018/A1:2019:en, Arc welding equipment - Part 1: Welding power sources Hitsaus ja juotto, yleistä SFS-EN ISO 14731:2019, Hitsauksen koordinointi. Tehtävät ja vastuut Welding coordination. Tasks and responsibilities (ISO 14731:2019) Julkaisukieli: fi/en SFS-EN ISO 14731:2006 SFS-EN ISO 14731:en:2006 SFS-EN ISO 14731:2019:en, Hitsauksen koordinointi. Tehtävät ja vastuut Welding coordination. Tasks and responsibilities (ISO 14731:2019) SFS-EN ISO 14731:2006 SFS-EN ISO 14731:en: Hitsausaineet SFS-EN ISO 14174:2019:en, Welding consumables. Fluxes for submerged arc welding and electroslag welding. Classification (ISO 14174:2019) SFS-EN ISO 14174:2012 SFS-EN ISO 14174:en:2012 SFS-EN ISO 24598:2019:en, Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels. Classification (ISO 24598:2019) SFS-EN ISO 24598:2012 SFS-EN ISO 24598:en:2012

22 Hitsauslaitteet SFS-EN IEC :2019:en, Arc welding equipment - Part 2: Liquid cooling systems SFS-EN :en:2013 SFS-EN IEC :2019:n, Arc welding equipment - Part 5: Wire feeders SFS-EN :en: Hitsausliitokset ja hitsit SFS-EN ISO 2553:2019:en, Hitsaus ja sen lähiprosessit. Piirustusmerkinnät. Hitsausliitokset Welding and allied processes. Symbolic representation on drawings. Welded joints (ISO 2553:2019) SFS-EN ISO 2553:2014 SFS-EN ISO 2553:2014/AC:2017:2017 SFS-EN ISO 2553:en: Kovajuotto ja pehmeäjuotto SFS-EN :2019:en, Avaruuslaitteiden laadunvarmistus. Korkean luotettavuuden juotos pintaliitoksissa Space product assurance. High-reliability soldering for surface-mount and mixed technology Pintakäsittely SFS-EN ISO 2376:2019:en, Anodizing of aluminium and its alloys. Determination of breakdown voltage and withstand voltage (ISO 2376:2019) SFS-EN ISO 2376:en: Emalit SFS-EN ISO 11177:2019:en, Vitreous and porcelain enamels. Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply. Quality requirements and testing (ISO 11177:2019)

23 23 SFS-EN ISO 11177:en:2016 SFS-EN ISO :2019:en, Vitreous and porcelain enamels. Low-voltage test for detecting and locating defects. Part 2: Slurry test for profiled surfaces (ISO :2019) Energian- ja lämmönsiirtotekniikka, yleistä SFS-EN 16825:2016/A1:2019:en, Refrigerated storage cabinets and counters for professional use. Classification, requirements and test conditions Energiatehokkuus. Energiansäästö, yleistä SFS-EN 16825:2016/A1:2019:en, Refrigerated storage cabinets and counters for professional use. Classification, requirements and test conditions Kaasupolttimet SFS-EN 521:2019:en, Nestekaasulaitteet. Vaatimukset kaasun höyrynpaineella toimiville kannettaville kaasulaitteille Specifications for dedicated liquefied petroleum gas appliances. Portable vapour pressure liquefied petroleum gas appliances SFS-EN 521:en: Vesivoimatekniikka SFS-EN IEC 62097:2019:en, Hydraulic machines, radial and axial - Methodology for performance transposition from model to prototype SFS-EN 62097:en: Aurinkoenergiatekniikka SFS-EN :2019:en, Aurinkolämpöjärjestelmät ja -komponentit. Tehdasvalmisteiset järjestelmät. Osa 2: Testausmenetelmät Thermal solar systems and components. Factory made systems. Part 2: Test methods

24 24 SFS-EN :2017:en: Tuulivoima SFS-EN IEC :2019:en, Wind energy generation systems - Part 1: Design requirements SFS-EN /A1:en:2011 SFS-EN :en: Eristeet, yleistä SFS-EN IEC :2019:en, Dielectric and resistive properties of solid insulating materials - Part 3-4: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity at elevated temperatures Muovi- ja kumieristeet SFS-EN :2017/A1:2019:en, Specification for plastic films for electrical purposes - Part 2: Methods of test Kaapelit ja johtimet SFS 7502:2019, Ajoneuvojen sähkölaitteiden liittämiseen sähköverkkoon tarkoitetut kytkentätarvikkeet Miniature connecting devices for the connection of electrical mains supplied equipment in road vehicles Julkaisukieli: fi SFS-EN 50066:1993 SFS-EN 50066:en: Kaapelit SFS-EN 50620:2017/A1:2019:en, Electric cables - Charging cables for electric vehicles Magneettiset komponentit SFS-EN IEC :2019:en, Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores

25 25 SFS-EN :en:2015 SFS-EN :en:2015 SFS-EN IEC :2019:en, Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores SFS-EN :2005/AC:2016:en:2018 SFS-EN :en:2006 SFS-EN :en: Sähkötarvikkeet, yleistä SFS-EN :2015/A2:2019:en, Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use Varokkeet ja muut ylivirtasuojalaitteet SFS-EN 60691:2016/A1:2019:en, Thermal-links - Requirements and application guide Releet SFS-EN IEC :2019:en, Measuring relays and protection equipment - Part 181: Functional requirements for frequency protection Muut sähkötarvikkeet SFS-EN IEC :2019:en, Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters SFS-EN :2010 SFS-EN /A1:en:2013 SFS-EN :en: Suurjännitekytkinlaitteet SFS-EN IEC :2019:en,

26 26 High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kv - Fluid-filled and extruded insulation cables - Fluid-filled and drytype cable-terminations SFS-EN :en: Pienjännitekytkinlaitteet SFS-EN IEC :2019:en, Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters SFS-EN :2010 SFS-EN /A1:en:2013 SFS-EN :en: Hehkulamput SFS-EN 60809:2015/A3:2019:en, Lamps for road vehicles - Dimensional, electrical and luminous requirements Muut lamppuihin liittyvät standardit SFS-EN 62717:2017/A2:2019:en, LED modules for general lighting - Performance requirements Pyörivät koneet, yleistä SFS-EN IEC :2019:en, Rotating electrical machines - Part 23: Repair, overhaul and reclamation Muuntajat. Kuristimet SFS-EN IEC :2019:en, Power transformers - Part 22-1: Power transformer and reactor fittings Protective devices SFS-EN IEC :2019:en, Power transformers - Part 22-3: Power transformer and reactor fittings - Insulating liquid to air heat exchangers

27 27 SFS-EN IEC :2019:en, Power transformers - Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers Tasasuuntaajat. Vaihtosuuntaajat. Stabiloitu virtalähde SFS-EN 62747:2014/A1:2019:en, Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems SFS-EN IEC :2019:en, Bi-directional grid-connected power converters - Part 2: Interface of GCPC and distributed energy resources Happoakut SFS-EN IEC 62902:2019:en, Secondary cells and batteries - Marking symbols for identification of their chemistry Alkaliakut SFS-EN IEC 62902:2019:en, Secondary cells and batteries - Marking symbols for identification of their chemistry Sähkönjakeluverkot SFS-EN :2019:en, Low-voltage surge protective devices - Part 31: Requirements and test methods for SPDs for photovoltaic installations SFS-EN /A1:en:2015 SFS-EN :en: Sähköasemat. Ylijännitesuojat SFS-EN :2019:en, Low-voltage surge protective devices - Part 31: Requirements and test methods for SPDs for photovoltaic installations SFS-EN /A1:en:2015 SFS-EN :en:2013

28 Sähkönjakelujohdot SFS-EN :2019:en, Overhead electrical lines exceeding AC 1 kv - Part 2-2: National Normative Aspects (NNA) for Belgium (based on EN :2012) Muut sähkönjakeluverkkoihin liittyvät laitteet SFS-EN 62747:2014/A1:2019:en, Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems Räjähdysvaarallisten tilojen sähkölaitteet SFS-EN IEC :2019, Räjähdysvaaralliset tilat. Osa 0: Laitteet. Yleiset vaatimukset Explosive atmospheres - Part 0: Equipment - General requirements Julkaisukieli: fi/en SFS-EN A11:2013 SFS-EN A11/AC:2015 SFS-EN A11/AC2:2016 SFS-EN /A11:en:2013 SFS-EN : A11:2013/Korjaus:2018:2018 SFS-EN :en:2013 SFS-EN IEC :2019:en, Räjähdysvaaralliset tilat. Osa 0: Laitteet. Yleiset vaatimukset Explosive atmospheres - Part 0: Equipment - General requirements SFS-EN A11:2013 SFS-EN A11/AC:2015 SFS-EN A11/AC2:2016 SFS-EN /A11:en:2013 SFS-EN : A11:2013/Korjaus:2018:2018 SFS-EN :en:2013 SFS-EN IEC :2019:en, Explosive atmospheres - Part 15: Equipment protection by type of protection ''n'' SFS-EN :en:2011

29 Kiskoliikenteen virroitinjärjestelmät SFS-EN :2017/A1:2019:en, Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus SFS-EN :2017/A1:2019:en, Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus Kiinteät vastukset SFS-EN :2011/A2:2019:en, Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0, Kiinteät kondensaattorit SFS-EN IEC :2019:en, Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 SFS-EN :en:2012 SFS-EN IEC :2019:en, Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 SFS-EN :en: Paperieristeiset ja muovieristeiset kondensaattorit SFS-EN IEC :2019:en, Fixed capacitors for use in electronic equipment - Part 17: Sectional specification - Fixed metallized polypropylene film dielectric AC and pulse capacitors SFS-EN :en: Puolijohdelaitteet, yleistä SFS-EN IEC :2019:en, Semiconductor devices - Mechanical and climatic test methods - Part 17: Neutron irradiation

30 30 SFS-EN :en: Pietsosähköiset ja dielektriset laitteet SFS-EN IEC :2019:en, Quartz crystal units of assessed quality - Part 4: Crystal units with thermistors Mikropiirit. Mikroelektroniikka SFS-EN IEC :2019:en, Integrated circuits - EMC evaluation of transceivers - Part 3: CAN transceivers SFS-EN IEC :2019:en, EMC IC modelling - Part 1: General modelling framework Pistokytkimet. Koskettimet SFS-EN IEC :2019:en, Connectors for electrical and electronic equipment - Tests and measurements - Part : Endurance test schedules - Test 99b: Test schedule for unmating under electrical load SFS-EN IEC :2019:en, Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz Elektroniikkalaitteiden mekaaniset rakenteet SFS-EN IEC :2019:en, Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 1: Dimensions and mechanical requirements Optoelektroniikka. Laserlaitteet SFS-EN IEC :2019:en, Tiedonsiirtoon käytettyjen vapaan tilan optisten viestintäjärjestelmien turvallisuus Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information

31 31 SFS-EN :en: Tietoliikenne, yleistä SFS-EN IEC :2019:en, Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics SFS-EN :en:2007 SFS-EN IEC 61918:2018/A11:2019:en, Industrial communication networks - Installation of communication networks in industrial premises Telepäätelaitteet, yleistä SFS-EN V2.6.1:2019, Environmental Engineering (EE). Power supply interface at the input to telecommunications and datacom (ICT) equipment. Part 2: Operated by -48 V direct current (dc) Radiovastaanottimet ja -lähettimet SFS-EN V3.1.1:2019, Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 12: Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS) Harmonised Standard for electromagnetic compatibility SFS-EN V2.2.1:2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. Part 27: Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P). Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU SFS-EN V2.2.1:2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. Part 29: Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz bands. Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU SFS-EN V2.2.1:2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. Part 33: Specific conditions for Ultra-WideBand (UWB) devices. Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU

32 Digitaalinen langaton televiestintä (DECT) SFS-EN V2.2.1:2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of the Directive 2014/53/EU GSM-järjestelmä SFS-EN V2.1.1:2019, Electromagnetic compatibilityand Radio spectrum Matters (ERM). ElectroMagnetic Compatibility (EMC)standard for radio equipment and services. Part 34: specific conditions for External Power Supply (EPS) for mobile phones. Harmonised Standard covering the essential requirements of article 6 of Directive 2014/30/EU Sähkömagneettinen yhteensopivuus, yleistä SFS-EN V3.1.1:2019, Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 12: Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS) Harmonised Standard for electromagnetic compatibility SFS-EN V2.2.1:2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. Part 15: Specific conditions for commercially available amateur radio equipment. Harmonised Standard covering the essential requirements of article 3.1(b) of the Directive 2014/53/EU SFS-EN V :2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation, and timing data. Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU SFS-EN V :2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 2: Specific conditions for radio paging equipment. Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU

33 33 SFS-EN V :2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS). Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU SFS-EN V2.2.1:2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. Part 27: Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P). Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU SFS-EN V2.2.1:2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. Part 29: Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz bands. Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU SFS-EN V2.1.1:2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 khz and 246 GHz. Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU SFS-EN V2.2.1:2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. Part 31: Specific conditions for equipment in the 9 khz to 315 khz band for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P). Harmonised Standard covering the essential requirements of article 3.1(b) of the Directive 2014/53/EU SFS-EN V2.2.1:2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. Part 33: Specific conditions for Ultra-WideBand (UWB) devices. Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU SFS-EN V2.1.1:2019, Electromagnetic compatibilityand Radio spectrum Matters (ERM). ElectroMagnetic Compatibility (EMC)standard for radio equipment and services. Part 34: specific conditions for External Power Supply (EPS) for mobile phones. Harmonised Standard covering the essential requirements of article 6 of Directive 2014/30/EU SFS-EN V3.2.1:2019, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. Part 4: Specific conditions for fixed radio links and ancillary equipment. Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU