T011/A22/2017 Liite 1 / Appendix 1 Sivu / Page 1(9) AKKREDITOITU TESTAUSLABORATORIO ACCREDITED TESTING LABORATORY INSPECTA OY Tunnus Code Laboratorio Laboratory Osoite Address www www T011 Inspecta Oy Robert Huberintie 2, 01510 VANTAA Robert Huberintie 2 FI-01510 VANTAA FINLAND Relanderinkatu 2 78200 VARKAUS Relanderinkatu 2 FI-78200 VARKAUS FINLAND www.inspecta.fi www.inspecta.fi Testausalat Fields of testing Materiaali- ja tuotetestaus Material and product testing
T011/A22/2017 Liite 1 / Appendix 1 Sivu / Page 2(9) Materiaali- ja tuotetestaus, Rikkomaton aineenkoetus, NDT, Kenttätestaus Material and product testing, Nondestructive testing, Site-Testing ASME I (1995, 1998, 2004, 2007, 2008, 2009, 2010, 2011, ASME VIII Osa/Div 1 (1989, 1992, 1995, 1998, 2001, 2004, 2007, 2010, Silmämääräinen tarkastus Visual examination SFS-EN 444 (1994) ISO 5579 (1985) SFS-EN 14784-2 ASME SE-94 (1989, 1992, 1995- ASME V/Article 2 (1989-2011) ASME V/Article 2 (1989- poislukien/excluding Appendix I- IV SFS 3286 (1975) ASME V/Article 7 (1995, 1998- ASME SE-709 (1980, 1991, 1995- SS 11 44 01 (1986) RCC-M MC-5000 / S 7710, SFS-EN ISO 9934-1 (2016) SFS-EN 13018 (2001) SFS-EN 970 SFS-EN ISO 17637 (2016) SFS 3287 (1975) SFS-EN 571-1 (1997) ASME V/Article 6 (1995, 1998- ASME SE-165 (1983, 1992, 1995- SS 11 45 01 (1984) RCC-M MC-4000 / S 7710, SFS-EN 571-1 (1997) ISO 4386-3
T011/A22/2017 Liite 1 / Appendix 1 Sivu / Page 3(9) Hitsausliitokset Welds ASME V/Article 5 (1989, 1992, 1995, 1998, 2001, 2004, 2007, 2010- SS 11 42 01 (1984) RCC-M MC-2000 / S 7710, ISO 4386-1 SFS-EN 25817 (1993) SFS-EN ISO 5817 (2003) (2006- SFS-EN 30042 (1994) SFS-EN 10042 (2005- SFS-EN 12062 (1998) SFS-EN-ISO 17635 (2010-2016) DIN 8563 Teil 3 (1985) AD-Merkblatt HP 5/3 (2002) SFS 3207 (1989) SFS-EN 1435 (1998) ISO 17636-1 ( ISO 17636-2 ( ISO 10675-1 (2016) ISO 10675-2 (2016) ISO 1106/1-3 (1984/85); Part 1 (1984), Part 2 (1985), Part 3 (1984) DIN 54111 Teil 1 (1988) BS 2600; Part 1 (1983), Part 2 (1973) BS 2910 (1986) SS 11 41 01 (1989) SFS-EN 12517-1 (2006) SFS-EN 12517-1 (2008) SFS-EN 12517-2SME III, div.1 NB-5320 ASME V Article 2 poislukien/excluding Appendix I-IV ASME I (-2011) ASME VIII (-2011) ASME IX (-2011) RCC-M MC-3100 / S 7710,
T011/A22/2017 Liite 1 / Appendix 1 Sivu / Page 4(9) Hitsausviisteet Bevellings Valut Castings Pyörrevirtatarkastus Eddy current examination SFS 5609 (1989) SFS-EN 1290 (1998) SFS-EN 1291 (1998) ASME III, div.1 NB-5340 SFS-EN ISO 17638 (2016) SFS-EN ISO 23278 (2010) SFS-EN 1289 (1998) ASME III, div.1 NB-5350 SFS-EN 571-1 (1997) SFS-EN ISO 23277 (2010) SFS 3290 (1982) SFS 5108 (1985) SFS-EN 1712 (1998) SFS-EN 1714 (1998) SFS-EN ISO 17640 (2012) SFS-EN ISO 11666 (2012) DIN 54125 (1989) SS 11 42 10 (1979) ASME V, artikel 4 (2001, 2004, 2007, 2010) ASME III, div.1 NB-5330 SFS-EN ISO 10863 (2011) SFS-EN ISO 15626 ( SFS-EN ISO 13588 ( ISO 19285 SFS-EN ISO 22825 (2012) NORDTEST method NDT 011 (1992) SFS-EN 1711 (2000) ISO 17643 (2005) ASME III, div.1 NB-5130 ASME III, div.1 NB-5130 DIN 1690 Part 2 (1985), Part 10 (1991)
T011/A22/2017 Liite 1 / Appendix 1 Sivu / Page 5(9) Silmämääräinen tarkastus Visual examination DIN 54111 Teil 2 (1982) EN 12680 SFS-EN 12681 ASME V/Article 3 (1989, 1992, 1995, 1998) poislukien/excluding Appendix I-III ASME V Article 2 Appendix VII (- 2011) ASTM E-1030 ASME E-1030 (1984, 1991, ASME E-186 (1984, 1991, ASME E-280 (1984, 1991, ASME E-446 (1984,1991, ISO 4993 (1987) ASTM E-155-91 (1991) ASME III, div.1 NB-2575 RCC-M MC-3200 / S 7710, SFS-EN 1369 (1997) ISO 4986 (1992) SEP 1935 (1982) ASME III, div.1 NB-2577 SFS-EN 1371-1 (1997) SFS-EN 1371-1 (2012) SFS-EN 1371-2 (1998) ISO 4987 (1992) SEP 1936 (1982) ASME III, div.1 NB-2576 SFS-EN 13018 (2001) SFS-EN 12454 (1998) SFS-EN 1370 (1997) SFS 3293 (1979) ASME SA-609/SA-609M (1986, 1991, SEP 1922 (1985) SFS-EN 12680-1 SFS-EN 12680-2 SFS-EN 12680-3 ASME III, div.1 NB-2574
T011/A22/2017 Liite 1 / Appendix 1 Sivu / Page 6(9) Takeet Forgings Tangot ja Takeet Bar and Forgings Putket Pipes and tubes Pyörrevirtatarkastus Eddy current examination SFS 3285 (1988) ASME SA-388/SA-388M (1986, 1991, ) SFS-EN 10228-3 (1998) SFS-EN 10228-4 (1998) SEP 1921 (1984) SFS-EN 10228-1 (1998) SFS-EN 10228-1 (1999) SFS-EN 10228-2 (1998) ASME III, div.1 NB-2542 ASME III, div.1 NB-2545 ASME III, div.1 NB-2546 ASME SE-213 (1983, 1986, ASME SE-273 (1983, 1989, SEP 1914 (1983) SEP 1915 (1989) ASME III, div.1 NB-2552 ASME SE-215 (1979, 1987, ASME SE-243 (1985, 1990, ASME SE-571 (1988, 1992, ASME SE-426 (1988, 1992, ASME SE-309 (1983, 1993, ASME V/Article 8 (1989, 1992, 1995, 1998, 2001, 2004, 2007, 2010) ASTM E-690-85 (1985, 1991) DIN 54141 Teil 3 (1987) SEP 1914 (1983)
T011/A22/2017 Liite 1 / Appendix 1 Sivu / Page 7(9) Teollisuusputkistot Industrial piping Vesiputkikattilat Water-tube boilers Lämmittämättömät painesäiliöt Unfired pressure vessels Tulitorvikattilat Shell boilers Teräs- ja alumiinirakenteet Steel and aluminium structures Levyt Plates Silmämääräinen tarkastus Visual examination SFS-EN ISO 10893-6 SFS-EN ISO 10893-7 ASME III, div.1 NB-2565 ASME III, div. 1 NB-2566 SFS-EN 13480-5 SFS-EN 13480-5+A1 SFS-EN 12952-6 SFS-EN 13445-5 + A1-5 SFS-EN 12953-5 SFS-EN 1090-2 SFS-EN 1090-3 SFS-EN 970/SFS-EN 13480-5 SFS-EN 571-1/SFS-EN 1289 SFS-EN 1290/SFS-EN 1291 SFS-EN 1435/SFS-EN 12517 SFS-EN 1714/SFS-EN 1712 SFS 3294 (1982) ASME SB-548 (1976, 1990, ASME SA-435/SA-435M (1982, 1990, SFS-EN 10160 (1999) SFS-EN 10307 SFS-EN 10308
T011/A22/2017 Liite 1 / Appendix 1 Sivu / Page 8(9) Pultit ja mutterit Bolts and nuts Paksuusmittaus Thickness measurements Pyörrevirtatarkastus Eddy current examination ASME III, div.1 NB-2583 ASME III, div.1 NB-2584 ASME III, div.1 NB-2585 ASME SE-797 (1987, 1990, SFS-EN 14127 (2005) SFS-ISO 2360 (1984) SFS-EN ISO 2360 (2004) ASTM E 376-89 (1989) Materiaali- ja tuotetestaus, Rikkova aineenkoetus, Vantaa, Varkaus Material and product testing, Destructive testing, Vantaa, Varkaus Rikkova aineenkoetus, hitsauksen menetelmäkoe Destructive testing, welding procedure test SFS-EN ISO 15614-1 (2004) /Amd. 1:2008 SFS-EN ISO 15614-1+A1+A2 (2012) SFS-EN ISO 15614-2 (2005) SFS-EN ISO 15614-5 (2004) SFS-EN ISO 15614-6 (2006) kohta/part 8 SFS-EN ISO 15614-7 (2007) SFS-EN ISO 15614-8 (2002) SFS-EN ISO 15614-11 (2002) SFS-EN ISO 14555 (2007) kohdat/parts 10.2.5-6; 11 (pl./excl. 11.7) ja/and 12 (pl./excl. 12.7) SFS-EN 13445-4 (2009) kohdat/parts 8.3 ja/and 8.4 AD 2000-Merkblatt HP 2/1 (2008) kohta/part 3
T011/A22/2017 Liite 1 / Appendix 1 Sivu / Page 9(9) Vetokoe Tensile test Iskukoe Impact test Kovuuskoe, Vickers Hardness test Vickers Taivutuskoe Bend test Murtokoe Fracture test Metallografiset tutkimukset Metallographic examinations ISO 6892 (2016) SFS-EN 895 ( (kumottu) SFS-EN 876 (1996) (kumottu) ISO 4136 (2011) SFS-EN 10045-1 (1990) (kumottu) SFS-EN 875 (1996) (kumottu) SFS-EN ISO 148-1 (2016) SFS-EN ISO 148-2 SFS-EN ISO 6507-1 (2006) SFS-EN 1043-1 (1996) (kumottu) SFS-EN 1043-2 (1997) (kumottu) SFS-EN ISO 9015-1 (2001) SFS-EN 910 (1996) (kumottu) SFS-EN ISO 7438 (2005) ISO 5173 (2000) (kumottu) SFS-EN ISO 5173 (2011) SFS-EN 1320 (1997) SFS-EN ISO 9017 SFS-EN 1321 (1997) SFS-EN ISO 5817 (2006) SFS-EN ISO 10042 (2006) SFS-EN ISO 17639 (2003) SFS-EN ISO 6520-1 (2008) SFS-EN ISO 13919-1 (1996) SFS-EN ISO 13919-2 (2004) SFS-EN ISO 13919-2_A1 (2004)