Uudet SFS-standardit Uudet SFS-standardien käännökset Uudet CENin julkaisut WTO-tiedotuskeskus SUOMEN STANDARDISOIMISLIITTO SFS RY STELLATUM OY

SFS-tiedotus Luetteloliite 3 2013 Uudet SFS-standardit Uudet SFS-standardien käännökset Uudet CENin julkaisut WTO-tiedotuskeskus SUOMEN STANDARDISOIMISLIITTO SFS RY STELLATUM OY 1

Uudet SFS-standardit Tällä palstalla luetellaan uudet SFS-standardit SFS-ICS-ryhmittäin. Merkintä /A1 tunnuksen lopussa tarkoittaa, että kyseessä on lisäys A1 alkuperäiseen standardiin. Merkintä +A1 tunnuksen lopussa tarkoittaa, että standardi sisältää muutoksen A 1. Standardin tunnuksen jälkeen on mainittu vahvistuspäivä. Standardit, jotka uusi standardi korvaa, on mainittu kunkin uuden standardin tiedoissa. Standardeja myy SFS-standardisoinnin asiakaspalvelu, puh. 09 149 9331 (vaihde). Niitä voi ladata omalle koneelleen SFS:n verkkokaupasta www. sales.sfs.fi. Sähköiset englanninkieliset versiot ovat saatavissa noin kahden viikon sisällä vahvistuspäivästä. Suomennokset ovat yleensä saatavissa 1 2 kuukauden kuluttua vahvistuspäivästä, joskus aikaa voi mennä paljonkin enemmän Osa standardeista liittyy CE-merkintää edellyttäviin uuden lähestymistavan direktiiveihin. 01.040.03 Palvelut. Yrityksen organisaatio, johtaminen ja laatu. Hallinto. Kuljetus. Sosiologia (Sanastot) SFS-ISO 20252, 2013-05-06 Markkina- ja mielipidetutkimus sekä yhteiskunnallinen tutkimus. Sanasto ja palveluvaatimukset Market, opinion and social research -- Vocabulary and service requirements SFS-ISO 20252:2008 01.040.13 Ympäristön ja terveydensuojelu. Turvallisuus (Sanastot) SFS-EN 14564, 2013-05-06 Vaarallisten aineiden kuljetussäiliöt. Termistö Tanks for transport of dangerous goods. Terminology SFS-EN 14564:2005 SFS-EN 14564:en:2005 SFS-EN 14564:en, 2013-05-06 Vaarallisten aineiden kuljetussäiliöt. Termistö Tanks for transport of dangerous goods. Terminology SFS-EN 14564:2005 SFS-EN 14564:en:2005 01.040.23 Putkistot, säiliöt, venttiilit, pumput. Hydrauliikka (Sanastot) SFS-EN 14564, 2013-05-06 Vaarallisten aineiden kuljetussäiliöt. Termistö Tanks for transport of dangerous goods. Terminology SFS-EN 14564:2005 SFS-EN 14564:en:2005 SFS-EN 14564:en, 2013-05-06 Vaarallisten aineiden kuljetussäiliöt. Termistö Tanks for transport of dangerous goods. Terminology SFS-EN 14564:2005 SFS-EN 14564:en:2005 01.040.43 Ajoneuvot (Sanastot) SFS-EN ISO 14451-1:en, 2013-05-06 ajoneuvoihin. Osa 1: Terminologia (ISO 14451-1:2013) Part 1: Terminology (ISO 14451-1:2013) 01.040.71 Kemiantekniikka (Sanastot) SFS-EN ISO 14451-1:en, 2013-05-06 ajoneuvoihin. Osa 1: Terminologia (ISO 14451-1:2013) Part 1: Terminology (ISO 14451-1:2013) 01.040.83 Kumi- ja muoviteollisuus (Sanastot) SFS-EN ISO 472:en, 2013-05-06 Plastics. Vocabulary (ISO 472:2013) SFS-EN ISO 472:2001 SFS-EN ISO 472:en:2001 01.040.91 Rakennusmateriaalit ja rakentaminen (Sanastot) SFS-EN 13956:en, 2013-03-25 Vedeneristyskermit. Muoviset ja kumiset vedeneristyskermit. Määritelmät ja ominaisuudet Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and characteristics SFS-EN 13956:en:2005 01.100.20 Koneenpiirustus SFS-EN ISO 1101:en, 2013-04-15 Geometrinen tuotemäärittely (GPS). Geometriset toleranssit. Muodon, suunnan, sijainnin ja heiton toleranssit Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out (ISO 1101:2012, including Cor 1:2013) SFS-EN ISO 1101:2006 SFS-EN ISO 1101:en:2006 03.100 Yrityksen organisaatio ja johtaminen SFS-EN 13067:en, 2013-05-06 Plastics welding personnel. Qualification testing of welders. Thermoplastics welded assemblies SFS-EN 13067:en:2003 SFS-EN ISO/IEC 19788-1:en, 2013-04-15 Information technology. Learning, education and training. Metadata for learning resources. Part 1: Framework (ISO/IEC 19788-1:2011) 03.120.01 Laatu, yleistä SFS-EN 62628, 2013-05-06 Guidance on software aspects of dependability 03.120.30 Tilastollisten menetelmien soveltaminen SFS-EN 61124, 2013-05-06 Reliability testing - Compliance tests for constant failure rate and constant failure intensity SFS-EN 61124:2007 07.060 Geologia. Meteorologia. Hydrologia SFS-EN ISO 14065:en, 2013-05-06 Kasvihuonekaasut. Vaatimukset kasvihuonekaasuja validoiville ja todentaville elimille käytettäväksi akkreditoinnissa ja muissa tunnustamismenettelyissä Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition (ISO 14065:2013) SFS-EN ISO 14065:en:2012 11.040 Lääkinnälliset laitteet SFS-EN 60601-1/A11, 2013-05-06 Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance SFS-EN 60601-1-8/A1, 2013-05-06 Medical electrical equipment -- Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems SFS-EN 60601-2-65, 2013-05-06 Medical electrical equipment -- Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment SFS-EN 61157/A1, 2013-05-06 Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment SFS-EN 61674, 2013-05-06 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging SFS-EN 61674/A1:2003 2

SFS-EN 61674:1998 SFS-EN 62127-1/A1, 2013-05-06 Ultrasonics - Hydrophones -- Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz SFS-EN 62127-2/A1, 2013-05-06 Ultrasonics - Hydrophones -- Part 2: Calibration for ultrasonic fields up to 40 MHz 11.180 Vammaisten apuvälineet SFS-EN 60601-2-66, 2013-05-06 Medical electrical equipment -- Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems 13.020.40 Ympäristön pilaantuminen ja suojelu SFS-EN ISO 14065:en, 2013-05-06 Kasvihuonekaasut. Vaatimukset kasvihuonekaasuja validoiville ja todentaville elimille käytettäväksi akkreditoinnissa ja muissa tunnustamismenettelyissä Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition (ISO 14065:2013) SFS-EN ISO 14065:en:2012 13.040 Ilman laatu SFS-EN ISO 13833:en, 2013-05-06 Stationary source emissions. Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide. Radiocarbon sampling and determination (ISO 13833:2013) SFS-EN ISO 14065:en, 2013-05-06 Kasvihuonekaasut. Vaatimukset kasvihuonekaasuja validoiville ja todentaville elimille käytettäväksi akkreditoinnissa ja muissa tunnustamismenettelyissä Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition (ISO 14065:2013) SFS-EN ISO 14065:en:2012 SFS-EN ISO 15012-1:en, 2013-05-06 Health and safety in welding and allied processes. Equipment for capture and separation of welding fume. Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013) SFS-EN ISO 15012-1:en:2005 SFS-EN ISO 16911-1:en, 2013-04-15 Päästöt kiinteistä lähteistä. Nopeuden ja tilavuusvirran manuaalinen ja automaattinen määrittäminen kanavassa. Osa 1: Manuaalinen referenssimenetelmä Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts. Part 1: Manual reference method (ISO 16911-1:2013) SFS-EN ISO 16911-2:en, 2013-04-15 Päästöt kiinteistä lähteistä. Nopeuden ja tilavuusvirran manuaalinen ja automaattinen määrittäminen kanavassa. Osa 2: Automaattiset mittausjärjestelmät Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts. Part 2: Automated measuring systems (ISO 16911-2:2013) 13.060 Veden laatu SFS-EN ISO 10710:en, 2013-05-06 Water quality. Growth inhibition test with the marine and brackish water macroalga Ceramium tenuicorne (ISO 10710:2010) SFS-EN ISO 5814:en, 2013-03-25 Water quality. Determination of dissolved oxygen. Electrochemical probe method (ISO 5814:2012) SFS-EN 25814:1993 13.080 Maaperän laatu. Maaperäoppi SFS-EN ISO 10930:en, 2013-03-25 Soil quality. Measurement of the stability of soil aggregates subjected to the action of water (ISO 10930:2012) SFS-EN ISO 11063:en, 2013-03-25 Soil quality. Method to directly extract DNA from soil samples (ISO 11063:2012) SFS-EN ISO 11269-2:en, 2013-03-25 Soil quality. Determination of the effects of pollutants on soil flora. Part 2: Effects of contaminated soil on the emergence and early growth of higher plants (ISO 11269-2:2012) SFS-ISO 11269-2:en:2008 SFS-EN ISO 22155:en, 2013-03-25 Soil quality. Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers. Static headspace method (ISO 22155:2011) SFS-ISO 22155:en:2007 SFS-EN ISO 23611-5:en, 2013-03-25 Soil quality. Sampling of soil invertebrates. Part 5: Sampling and extraction of soil macro-invertebrates (ISO 23611-5:2011) 13.120 Kodin turvallisuus SFS-EN 60335-2-17, 2013-05-06 Household and similar electrical appliances - Safety -- Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances SFS-EN 60335-2-17:2003 SFS-EN 60335-2-17/A1:2006 SFS-EN 60335-2-17/A2:2009 SFS-EN 60335-2-2/A1, 2013-05-06 Household and similar electrical appliances - Safety -- Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances SFS-EN 60335-2-6/A13, 2013-05-06 Household and similar electrical appliances - Safety -- Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances SFS-EN 60335-2-7/A1, 2013-05-06 Household and similar electrical appliances - Safety -- Part 2-7: Particular requirements for washing machines 13.180 Ergonomia SFS-EN ISO 9241-154:en, 2013-04-15 Ergonomics of human-system interaction. Part 154: Interactive voice response (IVR) applications (ISO 9241-154:2013) 13.220.10 Palontorjunta SFS-EN 1846-2 + A1:en, 2013-05-06 Palo- ja pelastusajoneuvot. Osa 2: Yleisvaatimukset. Turvallisuus ja suorituskyky Firefighting and rescue service vehicles. Part 2: Common requirements. Safety and performance SFS-EN 1846-2:en:2009 SFS-EN 1846-2:2009 13.220.40 Aineiden ja tuotteiden syttyvyys ja palo-ominaisuudet SFS-EN ISO 340:en, 2013-05-06 Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method (ISO 340:2013) SFS-EN ISO 340:en:2005 SFS-EN ISO 5659-2:en, 2013-05-06 Plastics. Smoke generation. Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2012) SFS-EN ISO 5659-2:en:2007 13.220.50 Rakennusmateriaalien ja -elementtien palonkesto SFS-EN 1365-1:en, 2013-03-25 Kantavien rakenteiden palonkestävyystestit. Osa 1: Seinät Fire resistance tests for loadbearing elements. Part 1: Walls SFS-EN 1365-1:en:2000 SFS-EN ISO 5659-2:en, 2013-05-06 Plastics. Smoke generation. Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2012) SFS-EN ISO 5659-2:en:2007 13.260 Sähköiskuilta suojautuminen SFS-EN 60900, 2013-05-06 Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. SFS-EN 60900:2005 3

13.300 Vaarallisilta aineilta suojautuminen SFS-EN 14564, 2013-05-06 Vaarallisten aineiden kuljetussäiliöt. Termistö Tanks for transport of dangerous goods. Terminology SFS-EN 14564:2005 SFS-EN 14564:en:2005 SFS-EN 14564:en, 2013-05-06 Vaarallisten aineiden kuljetussäiliöt. Termistö Tanks for transport of dangerous goods. Terminology SFS-EN 14564:2005 SFS-EN 14564:en:2005 13.340.10 Suojavaatetus SFS-EN ISO 15027-1:en, 2013-04-15 Kylmältä vedeltä suojaava vaatetus. Osa 1: Jatkuvaan käyttöön tarkoitetut puvut, vaatimukset ja turvallisuus Immersion suits. Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) SFS-EN ISO 15027-1:2002 SFS-EN ISO 15027-2:en, 2013-04-15 Kylmältä vedeltä suojaava vaatetus. Osa 2: Pelastuspuvut, vaatimukset ja turvallisuus Immersion suits. Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) SFS-EN ISO 15027-2:2002 SFS-EN ISO 15027-3:en, 2013-04-15 Kylmältä vedeltä suojaava vaatetus. Osa 3: Testausmenetelmät Immersion suits. Part 3: Test methods (ISO 15027-3:2012) SFS-EN ISO 15027-3:2002 13.340.20 Päänsuojaimet SFS-EN 1078 + A1, 2013-03-25 Kypärät pyöräilyyn, rullalautailuun ja rullaluisteluun Helmets for pedal cyclists and for users of skateboards and roller skates SFS-EN 1078:en:2012 SFS-EN 1078 + A1:en, 2013-03-25 Kypärät pyöräilyyn, rullalautailuun ja rullaluisteluun Helmets for pedal cyclists and for users of skateboards and roller skates SFS-EN 1078:en:2012 SFS-EN 1080:en, 2013-03-25 Pienten lasten suojakypärät Impact protection helmets for young children SFS-EN 1080/A1:en:2003 SFS-EN 1080/A2:en:2006 SFS-EN 1080:en:1997 SFS-EN 14052 + A1, 2013-03-25 Korkean suojauskyvyn teollisuuskypärät High performance industrial helmets SFS-EN 14052:en:2012 SFS-EN 14052 + A1:en, 2013-03-25 Korkean suojauskyvyn teollisuuskypärät High performance industrial helmets SFS-EN 14052:en:2012 SFS-EN 397 + A1, 2013-03-25 Teollisuuskypärät Industrial safety helmets SFS-EN 397:en:2012 SFS-EN 397 + A1:en, 2013-03-25 Teollisuuskypärät Industrial safety helmets SFS-EN 397:en:2012 SFS-EN 966 + A1:en, 2013-03-25 Helmets for airborne sports SFS-EN 966:en:2012 13.340.50 Jalkojen ja säärien suojaus SFS-EN ISO 13287:en, 2013-03-25 Henkilönsuojaimet. Jalkineet. Liukkauden testausmenetelmä Personal protective equipment. Footwear. Test method for slip resistance (ISO 13287:2012) SFS-EN ISO 13287:en:2008 17.040.10 Toleranssit ja sovitteet SFS-EN ISO 1101:en, 2013-04-15 Geometrinen tuotemäärittely (GPS). Geometriset toleranssit. Muodon, suunnan, sijainnin ja heiton toleranssit Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out (ISO 1101:2012, including Cor 1:2013) SFS-EN ISO 1101:2006 SFS-EN ISO 1101:en:2006 17.040.20 Pintojen ominaisuudet SFS-EN ISO 16610-85:en, 2013-05-06 Geometrical product specifications (GPS). Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013) 17.040.30 Mittauslaitteet SFS-EN ISO 1101:en, 2013-04-15 Geometrinen tuotemäärittely (GPS). Geometriset toleranssit. Muodon, suunnan, sijainnin ja heiton toleranssit Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out (ISO 1101:2012, including Cor 1:2013) SFS-EN ISO 1101:2006 SFS-EN ISO 1101:en:2006 SFS-EN ISO 16610-85:en, 2013-05-06 Geometrical product specifications (GPS). Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013) 17.140.30 Kulkuneuvojen aiheuttama melu SFS-EN 1793-1:en, 2013-04-15 Teiden meluesteet. Akustisten ominaisuuksien määritysmenetelmä. Osa 1: Tuotekohtainen äänen absorptio Road traffic noise reducing devices. Test method for determining the acoustic performance. Part 1: Intrinsic characteristics of sound absorption SFS-EN 1793-1:en:1997 17.140.50 Sähköakustiikka SFS-EN 60601-2-66, 2013-05-06 Medical electrical equipment -- Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems SFS-EN 61094-8, 2013-05-06 Measurement microphones Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison SFS-EN 61157/A1, 2013-05-06 Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment SFS-EN 62585, 2013-05-06 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter 17.220 Sähkö. Magnetismi. Sähkömittaus ja magneettinen mittaus SFS-EN 60404-11, 2013-05-06 Magnetic materials -- Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip SFS-EN 10282:en:2001 SFS-EN 60404-15, 2013-05-06 Magnetic materials -- Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials SFS-EN 60688, 2013-05-06 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals SFS-EN 60688/A1:1999 SFS-EN 60688/A2:2001 SFS-EN 60688:1993 SFS-EN 61326-1, 2013-05-06 and laboratory use - EMC requirements -- Part 1: General requirements SFS-EN 61326-1:2006 SFS-EN 61326-2-1, 2013-05-06 and laboratory use - EMC requirements -- Part 2-1: Particular requirements - Test configu- 4

rations, criteria for sensitive test and measurement equipment for EMC unprotected applications SFS-EN 61326-2-1:2006 SFS-EN 61326-2-2, 2013-05-06 and laboratory use - EMC requirements -- Part 2-2: Particular requirements - Test configurations, criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems SFS-EN 61326-2-2:2006 SFS-EN 61326-2-3, 2013-05-06 and laboratory use - EMC requirements -- Part 2-3: Particular requirements - Test configuration, criteria for transducers with integrated or remote signal conditioning SFS-EN 61326-2-3:2007 SFS-EN 61326-2-4, 2013-05-06 and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 SFS-EN 61326-2-4:2007 SFS-EN 61326-2-5, 2013-05-06 and laboratory use - EMC requirements -- Part 2-5: Particular requirements - Test configurations, criteria for devices with field bus interfaces according to IEC 61784-1 SFS-EN 61326-2-5:2007 SFS-EN 61788-13, 2013-05-06 Superconductivity -- Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites SFS-EN 61788-13:2004 SFS-EN 61869-2, 2013-05-06 Instrument transformers -- Part 2: Additional requirements for current transformers SFS-EN 60044-6:1999 SFS-EN 60044-1:2000 SFS-EN 60044-1/A1:2001 SFS-EN 60044-1/A2:2003 17.240 Säteilyn mittaus SFS-EN 50566, 2013-05-06 Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz - 6 GHz) 19.020 Testausolosuhteet ja -menetelmät, yleistä SFS-EN 61124, 2013-05-06 Reliability testing - Compliance tests for constant failure rate and constant failure intensity SFS-EN 61124:2007 19.080 Sähköinen ja elektroninen testaus SFS-EN 61326-1, 2013-05-06 and laboratory use - EMC requirements -- Part 1: General requirements SFS-EN 61326-1:2006 SFS-EN 61326-2-3, 2013-05-06 and laboratory use - EMC requirements -- Part 2-3: Particular requirements - Test configuration, criteria for transducers with integrated or remote signal conditioning SFS-EN 61326-2-3:2007 SFS-EN 61326-2-4, 2013-05-06 and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 SFS-EN 61326-2-4:2007 21.020 Koneiden, kojeiden ja laitteiden ominaisuudet ja rakenne SFS-EN 61124, 2013-05-06 Reliability testing - Compliance tests for constant failure rate and constant failure intensity SFS-EN 61124:2007 SFS-EN 62551, 2013-05-06 Analysis techniques for dependability - Petri net techniques 21.060 Kiinnittimet SFS-EN ISO 4032:en, 2013-05-06 Kuusiomutterit, malli 1. Tarkkuusluokat A ja B Hexagon regular nuts (style 1). Product grades A and B (ISO 4032:2012) SFS-EN ISO 4032:en:2001 SFS-EN ISO 4033:en, 2013-05-06 Kuusiomutterit, malli 2. Tarkkuusluokat A ja B Hexagon high nuts (style 2). Product grades A and B (ISO 4033:2012) SFS-EN ISO 4033:en:2001 SFS-EN ISO 4034:en, 2013-05-06 Kuusiomutterit, malli 1. Tarkkuusluokka C Hexagon regular nuts (style 1). Product grade C (ISO 4034:2012) SFS-EN ISO 4034:en:2001 SFS-EN ISO 4035:en, 2013-05-06 Matalat viistetyt kuusiomutterit, malli 0. Tarkkuusluokat A ja B Hexagon thin nuts chamfered (style 0). Product grades A and B (ISO 4035:2012) SFS-EN ISO 4035:en:2001 SFS-EN ISO 4036:en, 2013-05-06 Matalat kuusiomutterit (viistämättömät, malli 0). Tarkkuusluokka B Hexagon thin nuts unchamfered (style 0). Product grade B (ISO 4036:2012) SFS-EN ISO 4036:en:2001 SFS-EN ISO 8673:en, 2013-05-06 Kuusiomutterit, malli 1. Metrinen taajakierre. Tarkkuusluokat A ja B Hexagon regular nuts (style 1) with metric fine pitch thread. Product grades A and B (ISO 8673:2012) SFS-EN ISO 8673:en:2001 SFS-EN ISO 8674:en, 2013-05-06 Kuusiomutterit, malli 2. Metrinen taajakierre. Tarkkuusluokat A ja B Hexagon high nuts (style 2) with metric fine pitch thread. Product grades A and B (ISO 8674:2012) SFS-EN ISO 8674:en:2001 SFS-EN ISO 8675:en, 2013-05-06 Matalat viistetyt kuusiomutterit (malli 0). Metrinen taajakierre. Tarkkuusluokat A ja B Hexagon thin nuts chamfered (style 0) with metric fine pitch thread. Product grades A and B (ISO 8675:2012) SFS-EN ISO 8675:en:2001 23.020.20 Ajoneuvoihin asennetut säiliöt SFS-EN 14564, 2013-05-06 Vaarallisten aineiden kuljetussäiliöt. Termistö Tanks for transport of dangerous goods. Terminology SFS-EN 14564:2005 SFS-EN 14564:en:2005 SFS-EN 14564:en, 2013-05-06 Vaarallisten aineiden kuljetussäiliöt. Termistö Tanks for transport of dangerous goods. Terminology SFS-EN 14564:2005 SFS-EN 14564:en:2005 23.020.32 Kaasupullot SFS-EN ISO 13088:en, 2013-04-15 Gas cylinders. Acetylene cylinder bundles. Filling conditions and filling inspection (ISO 13088:2011) 23.040.01 Putkistot ja niiden osat, yleistä SFS-EN 12007-1:en, 2013-03-25 Kaasuputkistot. Maksimikäyttöpaine enintään 16 bar. Osa 1: Yleiset toiminnalliset suositukset Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Part 1: General functional requirements 5

SFS-EN 12007-1:2000 SFS-EN 12007-1:en:2000 SFS-EN 12007-4:en, 2013-03-25 Kaasuputkistot. Maksimikäyttöpaine enintään 16 bar. Osa 4: Toiminnalliset suositukset putkiston uusimiselle Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Part 4: Specific functional requirements for renovation SFS-EN 12007-4:en:2000 23.040.20 Muoviputket SFS-EN 12007-2:en, 2013-03-25 Kaasuputkistot. Maksimikäyttöpaine enintään 16 bar. Osa 2: Toiminnalliset suositukset polyeteenille (maksimikäyttöpaine enintään 10 bar) Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar) SFS-EN 12007-2:2000 SFS-EN 12007-2:en:2000 SFS-EN ISO 9080:en, 2013-04-15 Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012) SFS-EN ISO 9080:en:2003 23.040.60 Laipat, liittimet ja muut putkiliitokset SFS-EN 1092-1 + A1:en, 2013-04-15 Laipat ja laippaliitokset. Pyöreät laipat putkille, venttiileille, yhteille ja varusteille, PN-mitoitetut. Osa 1: Teräslaipat Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Part 1: Steel flanges SFS-EN 1092-1:2007 SFS-EN 1092-1:en:2007 23.040.99 Muut putkistojen osat SFS-EN 50443, 2013-05-06 Effects of electromagnetic interference on pipelines caused by high voltage a.c. electric traction systems and/or high voltage a.c. power supply systems 23.060 Venttiilit SFS-EN 13774:en, 2013-03-25 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements SFS-EN 13774:en:2003 SFS-EN 161 + A2:en, 2013-03-25 Automaattiset sulkuventtiilit kaasupolttimille ja kaasulaitteille Automatic shut-off valves for gas burners and gas appliances SFS-EN 161:en:2011 25.040 Teollisuusautomaatiojärjestelmät SFS-EN 61326-1, 2013-05-06 and laboratory use - EMC requirements -- Part 1: General requirements SFS-EN 61326-1:2006 SFS-EN 61326-2-1, 2013-05-06 and laboratory use - EMC requirements -- Part 2-1: Particular requirements - Test configurations, criteria for sensitive test and measurement equipment for EMC unprotected applications SFS-EN 61326-2-1:2006 SFS-EN 61326-2-2, 2013-05-06 and laboratory use - EMC requirements -- Part 2-2: Particular requirements - Test configurations, criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems SFS-EN 61326-2-2:2006 SFS-EN 61326-2-3, 2013-05-06 and laboratory use - EMC requirements -- Part 2-3: Particular requirements - Test configuration, criteria for transducers with integrated or remote signal conditioning SFS-EN 61326-2-3:2007 SFS-EN 61326-2-4, 2013-05-06 and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 SFS-EN 61326-2-4:2007 SFS-EN 61326-2-5, 2013-05-06 and laboratory use - EMC requirements -- Part 2-5: Particular requirements - Test configurations, criteria for devices with field bus interfaces according to IEC 61784-1 SFS-EN 61326-2-5:2007 SFS-EN 61499-1, 2013-05-06 Function blocks -- Part 1: Architecture FS-EN 61499-1:2005 SFS-EN 61499-2, 2013-05-06 Function blocks -- Part 2: Software tool requirements SFS-EN 61499-2:2005 SFS-EN 62382, 2013-05-06 Control systems in the process industry - Electrical and instrumentation loop check SFS-EN 62382:2007 25.080.60 Sahat SFS-EN 61029-2-11, 2013-05-06 Safety of transportable motor-operated electric tools -- Part 2-11: Particular requirements for combined mitre and bench saws SFS-EN 61029-2-11:2010 SFS-EN 61029-2-9, 2013-05-06 Safety of transportable motor-operated electric tools -- Part 2-9: Particular requirements for mitre saws SFS-EN 61029-2-9:2010 25.140 Käsikoneet ja -työkalut SFS-EN 60745-2-22/A11, 2013-05-06 Hand-held motor-operated electric tools - Safety -- Part 2-22: Particular requirements for cutoff machines SFS-EN 60745-2-3/A2, 2013-05-06 Hand-held motor-operated electric tools - Safety -- Part 2-3: Particular requirements for grinders, polishers and disk-type sanders SFS-EN 61029-2-1, 2013-05-06 Safety of transportable motor-operated electric tools -- Part 2-1: Particular requirements for circular saw benches SFS-EN 61029-2-1:2010 SFS-EN 61029-2-11, 2013-05-06 Safety of transportable motor-operated electric tools -- Part 2-11: Particular requirements for combined mitre and bench saws SFS-EN 61029-2-11:2010 SFS-EN 61029-2-9, 2013-05-06 Safety of transportable motor-operated electric tools -- Part 2-9: Particular requirements for mitre saws SFS-EN 61029-2-9:2010 25.160.01 Hitsaus ja juotto, yleistä SFS-EN ISO 15012-1:en, 2013-05-06 Health and safety in welding and allied processes. Equipment for capture and separation of welding fume. Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013) SFS-EN ISO 15012-1:en:2005 25.160.10 Hitsausprosessit SFS-EN 13067:en, 2013-05-06 Plastics welding personnel. Qualification testing of welders. Thermoplastics welded assemblies SFS-EN 13067:en:2003 SFS-EN ISO 15012-1:en, 2013-05-06 Health and safety in welding and allied processes. Equipment for capture and separation of welding fume. Part 1: Requirements for testing and marking of separation efficiency (ISO 6

15012-1:2013) SFS-EN ISO 15012-1:en:2005 SFS-EN ISO 15609-6:en, 2013-04-15 Hitsausohjeet ja niiden hyväksyntä metalleille. Hitsausohjeet. Osa 6: Laser-kaarihybridihitsaus Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Part 6: Laser-arc hybrid welding (ISO 15609-6:2013) 25.160.30 Hitsauslaitteet SFS-EN ISO 15012-1:en, 2013-05-06 Health and safety in welding and allied processes. Equipment for capture and separation of welding fume. Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013) SFS-EN ISO 15012-1:en:2005 27.010 Energian- ja lämmönsiirtotekniikka, yleistä SFS-EN 16325:en, 2013-03-25 Guarantees of Origin related to energy. Guarantees of Origin for Electricity 27.060 Polttimet. Kattilat SFS-EN ISO 12211:en, 2013-03-25 Öljy-, petrokemiallinen ja maakaasuteollisuus. Kierrelevy lämmönvaihtimet (ISO 12211:2012) Petroleum, petrochemical and natural gas industries. Spiral plate heat exchangers (ISO 12211:2012) SFS-EN ISO 12212:en, 2013-03-25 Öljy-, petrokemiallinen- ja maakaasuteollisuus. Hairpin-tyyppinen lämmönsiirrin (ISO 12212:2012) Petroleum, petrochemical and natural gas industries. Hairpin-type heat exchangers (ISO 12212:2012) 27.070 Polttokennot SFS-EN 62282-6-100/A1, 2013-05-06 Fuel cell technologies -- Part 6-100: Micro fuel cell power systems - Safety 27.140 Vesivoimatekniikka SFS-EN 61362, 2013-05-06 Guide to specification of hydraulic turbine governing systems SFS-EN 61362:1998 27.180 Tuulivoima SFS-EN 61400-11, 2013-05-06 Wind turbines -- Part 11: Acoustic noise measurement techniques SFS-EN 61400-11/A1:2006 SFS-EN 61400-11:2003 SFS-EN 61400-4, 2013-05-06 Wind turbines -- Part 4: Design requirements for wind turbine gearboxes 29.020 Sähkötekniikka, yleistä SFS-EN 62305-2, 2013-05-06 Protection against lightning -- Part 2: Risk management SFS-EN 62305-2:2006 SFS-EN 62561-1, 2013-05-06 Lightning Protection System Components (LPSC) -- Part 1: Requirements for connection components FS-EN 50164-1:en:2009 SFS-EN 62561-2, 2013-05-06 Lightning Protection System Components (LP- SC) -- Part 2: Requirements for conductors and earth electrodes SFS-EN 50164-2:en:2009 SFS-EN 62561-3, 2013-05-06 Lightning Protection System Components (LP- SC) -- Part 3: Requirements for isolating spark gaps SFS-EN 50164-3/A1:en:2010 SFS-EN 50164-3:en:2007 SFS-EN 62561-5, 2013-05-06 Lightning protection system components (LP- SC) -- Part 5: Requirements for earth electrode inspection housings and earth electrode seals SFS-EN 50164-5:en:2010 29.030 Magneettiset materiaalit SFS-EN 60404-11, 2013-05-06 Magnetic materials -- Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip SFS-EN 10282:en:2001 SFS-EN 60404-15, 2013-05-06 Magnetic materials -- Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials 29.050 Suprajohtavuus ja johtavat materiaalit SFS-EN 61788-13, 2013-05-06 Superconductivity -- Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites FS-EN 61788-13:2004 29.060 Kaapelit ja johtimet SFS-EN 60317-0-7, 2013-05-06 Specifications for particular types of winding wires -- Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm SFS-EN 60317-0-8, 2013-05-06 Specifications for particular types of winding wires -- Part 0-8: General requirements - Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire SFS-EN 60317-2, 2013-05-06 Specifications for particular types of winding wires -- Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer SFS-EN 60317-2:1996 SFS-EN 60317-2/A1:1999 SFS-EN 60317-2/A2:2000 SFS-EN 60317-48, 2013-05-06 Specifications for particular types of winding wires -- Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 SFS-EN 60317-48:2000 SFS-EN 60317-49, 2013-05-06 Specifications for particular types of winding wires -- Part 49: Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 SFS-EN 60317-49:2000 SFS-EN 60317-50, 2013-05-06 Specifications for particular types of winding wires -- Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 SFS-EN 60317-50:2000 SFS-EN 60317-56, 2013-05-06 Specifications for particular types of winding wires -- Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm, class 180 SFS-EN 60317-60, 2013-05-06 Specifications for particular types of winding wires -- Part 60: Polyester glass fibre wound minimum class 155 resin or varnish impregnated or not impregnated, bare or enamelled, rectangular copper wire, temperature index 155 SFS-EN 60317-61, 2013-05-06 Specifications for particular types of winding wires -- Part 61: Polyester glass fibre wound, minimum class 180, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 SFS-EN 60317-62, 2013-05-06 Specifications for particular types of winding wires -- Part 62: Polyester glass fibre wound, minimum class 200 resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 SFS-EN 60851-6, 2013-05-06 Winding wires - Test methods -- Part 6: Thermal properties 7

SFS-EN 60851-6:1997 SFS-EN 60851-6/A1:1997 SFS-EN 60851-6/A2:2004 SFS-EN 61394, 2013-05-06 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors 29.080 Sähköeristys SFS-EN 62217, 2013-05-06 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria SFS-EN 62217:2007 29.100 Sähkölaitteiden komponentit SFS-EN 62358, 2013-05-06 Ferrite cores - Standard inductance factor for gapped cores and its tolerance SFS-EN 62358:2005 SFS-EN 62674-1, 2013-05-06 High frequency inductive components -- Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment 29.120 Sähkötarvikkeet SFS-EN 50539-11, 2013-05-06 Low-voltage surge protective devices - Surge protective devices for specific application including d.c. -- Part 11: Requirements and tests for SPDs in photovoltaic applications SFS-EN 60269-4/A1, 2013-05-06 Low-voltage fuses -- Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices SFS-EN 60358-1, 2013-05-06 Coupling capacitors and capacitor dividers -- Part 1: General rules SFS-EN 60947-4-1/A1, 2013-05-06 Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters SFS-EN 60947-5-2/A1, 2013-05-06 Low-voltage switchgear and controlgear -- Part 5-2: Control circuit devices and switching elements - Proximity switches SFS-EN 61008-1, 2013-05-06 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) -- Part 1: General rules SFS-EN 61008-1/A13:2012 SFS-EN 61008-1:2005 SFS-EN 61008-1/A11:2008 SFS-EN 61008-1/A12:2009 SFS-EN 61009-1, 2013-05-06 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) -- Part 1: General rules SFS-EN 61009-1/A11:2008 SFS-EN 61009-1/A12:2009 SFS-EN 61009-1/A13:2009 SFS-EN 61009-1/A14:2012 SFS-EN 61009-1:2005 SFS-EN 62423, 2013-05-06 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses SFS-EN 62423:2010 29.130 Kytkin- ja ohjauslaitteet SFS-EN 60947-4-1/A1, 2013-05-06 Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters SFS-EN 60947-4-2, 2013-05-06 Low-voltage switchgear and controlgear -- Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters SFS-EN 60947-4-2:2000 SFS-EN 60947-4-2/A1:2002 SFS-EN 60947-4-2/A2:2007 SFS-EN 60947-5-2/A1, 2013-05-06 Low-voltage switchgear and controlgear -- Part 5-2: Control circuit devices and switching elements - Proximity switches SFS-EN 60947-5-5/A11, 2013-05-06 Low-voltage switchgear and controlgear -- Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function SFS-EN 60947-8/A2, 2013-05-06 Low-voltage switchgear and controlgear -- Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines SFS-EN 61439-1, 2013-05-06 Pienjännitekeskukset. Osa 1: Yleisvaatimukset Low-voltage switchgear and controlgear assemblies -- Part 1: General rules SFS-EN 61439-1:2010 SFS-EN 61439-2, 2013-05-06 Pienjännitekeskukset. Osa 2: Ammattikäyttöön tarkoitetut kojeistot Low-voltage switchgear and controlgear assemblies -- Part 2: Power switchgear and controlgear assemblies SFS-EN 61439-2:2010 SFS-EN 61439-3, 2013-05-06 Pienjännitekeskukset. Osa 3: Maallikoiden käyttöön tarkoitetut keskukset (jakokeskukset) Low-voltage switchgear and controlgear assemblies -- Part 3: Distribution boards intended to be operated by ordinary persons (DBO) SFS-EN 61439-6, 2013-05-06 Low-voltage switchgear and controlgear assemblies -- Part 6: Busbar trunking systems (busways) SFS-EN 60439-2:2000 SFS-EN 60439-2/A1:2006 SFS-EN 62271-100/A1, 2013-05-06 High-voltage switchgear and controlgear -- Part 100: Alternating-current circuit-breakers SFS-EN 62271-101, 2013-05-06 High-voltage switchgear and controlgear -- Part 101: Synthetic testing SFS-EN 62271-101:2007 SFS-EN 62271-101/A1:2011 SFS-EN 62271-105, 2013-05-06 High-voltage switchgear and controlgear -- Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kv up to and including 52 kv SFS-EN 62271-105:2003 SFS-EN 62271-107, 2013-05-06 High-voltage switchgear and controlgear -- Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kv up to and including 52 kv SFS-EN 62271-107:2006 SFS-EN 62271-110, 2013-05-06 High-voltage switchgear and controlgear -- Part 110: Inductive load switching SFS-EN 62271-110:2009 SFS-EN 62271-207, 2013-05-06 High-voltage switchgear and controlgear -- Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kv SFS-EN 62271-207:2008 29.140 Valaisimet ja niihin liittyvät laitteet SFS-EN 60432-3, 2013-05-06 Incandescent lamps - Safety specifications -- Part 3: Tungsten-halogen lamps (non-vehicle) SFS-EN 60432-3:2003 SFS-EN 60432-3/A1:2005 SFS-EN 60432-3/A2:2008 SFS-EN 60968, 2013-05-06 Self-ballasted lamps for general lighting services - Safety requirements SFS-EN 60968:1992 SFS-EN 60968/A1:1995 8

SFS-EN 60968/A2:2000 SFS-EN 61195/A1, 2013-05-06 Double-capped fluorescent lamps - Safety specifications SFS-EN 61199/A1, 2013-05-06 Single-capped fluorescent lamps - Safety specifications SFS-EN 61347-1/A2, 2013-05-06 Lamp controlgear -- Part 1: General and safety requirements SFS-EN 61347-2-9, 2013-05-06 Lamp controlgear -- Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) SFS-EN 61347-2-9:2001 SFS-EN 61347-2-9/A1:2004 SFS-EN 61347-2-9/A2:2007 SFS-EN 61821, 2013-05-06 Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits SFS-EN 61821:2003 SFS-EN 62031/A1, 2013-05-06 LED modules for general lighting - Safety specifications 29.160 Pyörivät koneet SFS-EN 60034-18-21, 2013-05-06 Rotating electrical machines -- Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification SFS-EN 60034-18-21/A1:1997 SFS-EN 60034-18-21/A2:1997 SFS-EN 60034-18-21:1995 SFS-EN 60034-18-31, 2013-05-06 Rotating electrical machines -- Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines SFS-EN 60034-18-31:1995 SFS-EN 60034-18-31/A1:1997 SFS-EN 60034-18-34, 2013-05-06 Rotating electrical machines -- Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems CLC/TS 60034-18-34:2004 29.180 Muuntajat. Kuristimet SFS-EN 60076-18, 2013-05-06 Power transformers -- Part 18: Measurement of frequency response SFS-EN 61558-2-14, 2013-05-06 Safety of transformers, reactors, power supply units and combination thereof -- Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers 29.220 Galvaaniset paristot ja akut SFS-EN 62281, 2013-05-06 Safety of primary and secondary lithium cells and batteries during transport SFS-EN 62281:2004 29.240 Sähkönjakeluverkot SFS-EN 60358-1, 2013-05-06 Coupling capacitors and capacitor dividers -- Part 1: General rules SFS-EN 60900, 2013-05-06 Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. SFS-EN 60900:2005 SFS-EN 61394, 2013-05-06 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors SFS-EN 61643-11, 2013-05-06 Low-voltage surge protective devices -- Part 11: Surge protective devices connected to lowvoltage power systems - Requirements and test methods SFS-EN 61643-11:2002 SFS-EN 61643-11/A11:2007 SFS-EN 61643-21/A2, 2013-05-06 Low voltage surge protective devices -- Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods 29.260 Erityisoloissa käytettävät sähkölaitteet SFS-EN 60079-35-1, 2013-05-06 Explosive atmospheres -- Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion SFS-EN 62013-1:2007 SFS-EN 60079-35-2, 2013-05-06 Explosive atmospheres -- Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters SFS-EN 62013-2:2007 SFS-EN 60900, 2013-05-06 Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. SFS-EN 60900:2005 29.280 Kiskoliikenteen virroitinjärjestelmät SFS-EN 50149, 2013-05-06 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires SFS-EN 50149:en:2001 SFS-EN 50367, 2013-05-06 Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access) SFS-EN 50367:en:2006 SFS-EN 50443, 2013-05-06 Effects of electromagnetic interference on pipelines caused by high voltage a.c. electric traction systems and/or high voltage a.c. power supply systems 31.020 Elektroniikan komponentit, yleistä SFS-EN 61360-2, 2013-05-06 Standard data element types with associated classification scheme for electric components -- Part 2: EXPRESS dictionary schema SFS-EN 61360-2:2002 SFS-EN 61360-2/A1:2004 31.060 Kondensaattorit SFS-EN 60358-1, 2013-05-06 Coupling capacitors and capacitor dividers -- Part 1: General rules 31.080 Puolijohdelaitteet SFS-EN 62031/A1, 2013-05-06 LED modules for general lighting - Safety specifications 31.120 Elektroniset näyttölaitteet SFS-EN 61747-30-1, 2013-05-06 Liquid crystal display devices -- Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type SFS-EN 61747-6:2004 SFS-EN 61747-4, 2013-05-06 Liquid crystal display devices -- Part 4: Liquid crystal display modules and cells - Essential ratings and characteristics SFS-EN 61747-4:1999 SFS-EN 62595-2, 2013-05-06 LCD backlight unit -- Part 2: Electro-optical measurement methods of LED backlight unit 31.140 Pietsosähköiset ja dielektriset laitteet SFS-EN 60862-2, 2013-05-06 Surface acoustic wave (SAW) filters of assessed quality -- Part 2: Guidelines for the use SFS-EN 60862-2:2002 9

SFS-EN 61240, 2013-05-06 Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rules FS-EN 61240:1997 SFS-EN 61837-1, 2013-05-06 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections -- Part 1: Plastic moulded enclosure outlines SFS-EN 61837-1:1999 SFS-EN 62276, 2013-05-06 Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods SFS-EN 62276:2006 SFS-EN 62575-2, 2013-05-06 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality -- Part 2: Guidelines for the use 31.260 Optoelektroniikka. Laserlaitteet SFS-EN 61988-2-5, 2013-05-06 Plasma display panels -- Part 2-5: Measuring methods - Acoustic noise SFS-EN 62341-6-3, 2013-05-06 Organic light emitting diode (OLED) displays -- Part 6-3: Measuring methods of image quality SFS-EN 62595-2, 2013-05-06 LCD backlight unit -- Part 2: Electro-optical measurement methods of LED backlight unit 33.040 Televerkot SFS-EN 319401 V1.1.1, 2013-03-25 Electronic Signatures and Infrastructures (ESI). General Policy Requirements for Trust Service Providers supporting Electronic Signatures SFS-EN 319411-2 V1.1.1, 2013-03-25 Electronic Signatures and Infrastructures (ESI). Policy and security requirements for Trust Service Providers issuing certificates. Part 2: Policy requirements for certification authorities issuing qualified certificates SFS-EN 319411-3 V1.1.1, 2013-03-25 Electronic Signatures and Infrastructures (ESI). Policy and security requirements for Trust Service Providers issuing certificates. Part 3: Policy requirements for Certification Authorities issuing public key certificates SFS-EN 319412-5 V1.1.1, 2013-03-25 Electronic Signatures and Infrastructures (ESI). Profiles for Trust Service Providers issuing certificates. Part 5: Extension for Qualified Certificate profile SFS-EN 50173-4/A2, 2013-05-06 Information technology - Generic cabling systems -- Part 4: Homes SFS-EN 62037-2, 2013-05-06 Passive RF and microwave devices, intermodulation level measurement -- Part 2: Measurement of passive intermodulation in coaxial cable assemblies 33.060 Radioliikenne SFS-EN 301473 V1.4.1, 2013-04-15 Satellite Earth Stations and Systems (SES). Aircraft Earth Stations (AES) operating under the Aeronautical Mobile Satellite Service (AMSS)/ Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS) SFS-EN 302307 V1.3.1, 2013-04-15 Digital video broadcasting (DVB). Second generation framing structure, channel coding and modulation systems for broadcasting, interactive services, news gathering and other broadband satellite applications (DVB-S2) SFS-EN 60728-3-1, 2013-05-06 Cable networks for television signals, sound signals and interactive services -- Part 3-1: Methods of measurement of non-linearity for full digital channel load with DVB-C signals 33.070 Matkaviestintäpalvelut SFS-EN 303978 V1.1.2, 2013-03-25 Satellite Earth Stations and Systems (SES). Harmonized EN for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the R&TTE Directive SFS-EN 50360/A1, 2013-05-06 Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz) SFS-EN 50566, 2013-05-06 Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz - 6 GHz) 33.100 Sähkömagneettinen yhteensopivuus SFS-EN 301489-50 V1.2.1, 2013-04-15 Electromagnetic compatibility and Radio spectrum Matters (ERM). ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment SFS-EN 50443, 2013-05-06 Effects of electromagnetic interference on pipelines caused by high voltage a.c. electric traction systems and/or high voltage a.c. power supply systems SFS-EN 55016-1-4/A1, 2013-05-06 Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements SFS-EN 55016-1-5/A1, 2013-05-06 Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-5: Radio disturbance and immunity measuring apparatus - Specifications and validation procedures for CALTS and REFTS from 30 MHz to 1 000 MHz SFS-EN 55103-1/A1, 2013-05-06 Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use -- Part 1: Emissions SFS-EN 61000-4-4, 2013-05-06 Electromagnetic compatibility (EMC) -- Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test SFS-EN 61000-4-4:2005 SFS-EN 61000-4-4/A1:2011 SFS-EN 61326-1, 2013-05-06 and laboratory use - EMC requirements -- Part 1: General requirements SFS-EN 61326-1:2006 SFS-EN 61326-2-1, 2013-05-06 and laboratory use - EMC requirements -- Part 2-1: Particular requirements - Test configurations, criteria for sensitive test and measurement equipment for EMC unprotected applications SFS-EN 61326-2-1:2006 SFS-EN 61326-2-2, 2013-05-06 and laboratory use - EMC requirements -- Part 2-2: Particular requirements - Test configurations, criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems SFS-EN 61326-2-2:2006 SFS-EN 61326-2-3, 2013-05-06 and laboratory use - EMC requirements -- Part 2-3: Particular requirements - Test configuration, criteria for transducers with integrated or remote signal conditioning SFS-EN 61326-2-3:2007 10

SFS-EN 61326-2-4, 2013-05-06 and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 SFS-EN 61326-2-4:2007 SFS-EN 61326-2-5, 2013-05-06 and laboratory use - EMC requirements -- Part 2-5: Particular requirements - Test configurations, criteria for devices with field bus interfaces according to IEC 61784-1 SFS-EN 61326-2-5:2007 33.120 Televiestintälaitteiden komponentit ja tarvikkeet SFS-EN 61169-47, 2013-05-06 Radio-frequency connectors -- Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 O cable networks (type F-Quick) SFS-EN 62037-2, 2013-05-06 Passive RF and microwave devices, intermodulation level measurement -- Part 2: Measurement of passive intermodulation in coaxial cable assemblies 33.160 Audio-, video ja audiovisuaalinen tekniikka SFS-EN 62075, 2013-05-06 Audio/video, information and communication technology equipment - Environmentally conscious design SFS-EN 62075:2009 33.170 Televisio- ja radiolähetykset SFS-EN 302307 V1.3.1, 2013-04-15 Digital video broadcasting (DVB). Second generation framing structure, channel coding and modulation systems for broadcasting, interactive services, news gathering and other broadband satellite applications (DVB-S2) SFS-EN 60728-3-1, 2013-05-06 Cable networks for television signals, sound signals and interactive services -- Part 3-1: Methods of measurement of non-linearity for full digital channel load with DVB-C signals SFS-EN 62553, 2013-05-06 Methods of measurement for digital network - Performance characteristics of terrestrial digital multimedia transmission network 33.180 Kuituoptiikkaviestintä SFS-EN 50411-3-6, 2013-05-06 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications -- Part 3-6: Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U) SFS-EN 60793-1-54, 2013-05-06 Optical fibres -- Part 1-54: Measurement methods and test procedures - Gamma irradiation SFS-EN 60793-1-54:2004 SFS-EN 60793-2-30, 2013-05-06 Optical fibres -- Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres SFS-EN 60793-2-30:2009 SFS-EN 60794-2-31, 2013-05-06 Optical fibre cables -- Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling SFS-EN 60794-2-31:2006 SFS-EN 61300-2-11, 2013-05-06 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-11: Tests - Axial compression SFS-EN 61300-2-11:1997 SFS-EN 61300-2-14, 2013-05-06 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-14: Tests - High optical power SFS-EN 61300-2-14:2006 SFS-EN 61300-2-19, 2013-05-06 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-19: Tests - Damp heat (steady state) SFS-EN 61300-2-19:2006 SFS-EN 61753-022-2, 2013-05-06 Fibre optic interconnecting devices and passive components - Performance standard -- Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment SFS-EN 61753-022-2:2003 SFS-EN 61753-056-2, 2013-05-06 Fibre optic interconnecting devices and passive components - Performance standard -- Part 056-2: Single mode fibre pigtailed style optical fuse for category C - Controlled environment SFS-EN 61753-057-2, 2013-05-06 Fibre optic interconnecting devices and passive components - Performance standard -- Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment SFS-EN 61753-091-2, 2013-05-06 Fibre optic interconnecting devices and passive components - Performance standard -- Part 091-2: Non-connectorized single-mode fibre optic pigtailed circulators for category C - Controlled environment SFS-EN 61753-143-2, 2013-05-06 Fibre optic interconnecting devices and passive components - Performance standard -- Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environment SFS-EN 62343-1-3, 2013-05-06 Dynamic modules -- Part 1-3: Performance standards - Dynamic gain tilt equalizer (nonconnectorized) SFS-EN 62343-1-3:2007 33.200 Etäkäyttö. Etämittaus SFS-EN 61850-7-410, 2013-05-06 Communication networks and systems for power utility automation -- Part 7-410: Basic communication structure - Hydroelectric power plants - Communication for monitoring and control SFS-EN 61850-7-410:2008 SFS-EN 61968-1, 2013-05-06 Application integration at electric utilities - System interfaces for distribution management -- Part 1: Interface architecture and general recommendations SFS-EN 61968-1:2004 SFS-EN 62488-1, 2013-05-06 Power line communication systems for power utility applications -- Part 1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids SFS-EN 60495:1995 35.020 Tietotekniikka, yleistä SFS-EN 50600-1, 2013-05-06 Information technology - Data centre facilities and infrastructures -- Part 1: General concepts SFS-ISO/IEC 27007, 2013-05-06 Informaatioteknologia. Turvallisuus. Tietoturvallisuuden hallintajärjestelmien auditointiohjeet Information technology -- Security techniques -- Guidelines for information security management systems auditing SFS-ISO/IEC 27007:en, 2013-05-06 Informaatioteknologia. Turvallisuus. Tietoturvallisuuden hallintajärjestelmien auditointiohjeet Information technology -- Security techniques -- Guidelines for information security management systems auditing 35.040 Merkistöt ja tietojen koodaus SFS-ISO/IEC 27005, 2013-05-06 Informaatioteknologia. Turvallisuus. Tietoturvariskien hallinta Information technology -- Security techniques -- Information security risk management 11