Suomen Standardisoimisliitto Standardiluettelo
Standardiluettelo Tässä luettelossa esitetään kesä-syyskuussa 2019 vahvistetut SFS-standardit aiheen mukaisesti SFS-ICS-ryhmittäin. Standardin tunnuksen jälkeen on mainittu vahvistuspäivä. Standardit, jotka uusi standardi korvaa, on mainittu kunkin uuden standardin tiedoissa. Standardien englanninkieliset versiot julkaistaan noin viikon kuluttua eurooppalaisen standardisoimisjärjestö CENin vahvistamispäivästä. Osa standardeista käännetään suomeksi. Niiden julkaisuaikataulun voi tarkistaa SFS:n tietopalvelusta (info@sfs.fi). Sisällys Uudet SFS-standardit... 3 Kumotut SFS-standardit... 136 Uudet CENin julkaisut... 138 WTO-tietopiste... 141 Suomen Standardisoimisliitto SFS ry Malminkatu 34, PL 130, 00101 Helsinki p. 09 149 9331, www.sfs.fi, sfs@sfs.fi Y-tunnus: 0202290-8
Luettelossa käytetyt merkinnät ja lyhenteet päivämäärä fi/sv fi/en fi/sv/en fi sv en x standardien vahvistamispäivä ja muiden SFS-julkaisujen julkaisemispäivä kaksikielinen (suomi-ruotsi) kaksikielinen (suomi-englanti) kolmikielinen (suomi-ruotsi-englanti) saatavana suomenkielisenä saatavana ruotsinkielisenä saatavana englanninkielisenä saatavana vain merkityllä kielellä p. painos s. sivumäärä
3 / 142 Uudet SFS-standardit 01.040.13 Ympäristön ja terveydensuojelu. Turvallisuus (Sanastot) SFS-EN 14564:2019:en, 2019-08-16 Vaarallisten aineiden kuljetussäiliöt. Termistö Tanks for transport of dangerous goods. Terminology SFS-EN 14564:2013 SFS-EN 14564:en:2013 01.040.17 Metrologia ja mittaus. Fysikaaliset ilmiöt (Sanastot) SFS-EN ISO 25178-73:2019:en, 2019-06-21 Geometrical product specifications (GPS). Surface texture: Areal. Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) 01.040.19 Testaus (Sanastot) SFS-EN ISO 12718:2019:en, 2019-09-20 Rikkomaton aineenkoetus. Pyörrevirtatarkastus. Sanasto Non-destructive testing. Eddy current testing. Vocabulary (ISO 12718:2019) SFS-EN ISO 12718:2009 SFS-EN ISO 12718:en:2009 01.040.23 Putkistot, säiliöt, venttiilit, pumput. Hydrauliikka (Sanastot) SFS-EN 14564:2019:en, 2019-08-16 Vaarallisten aineiden kuljetussäiliöt. Termistö Tanks for transport of dangerous goods. Terminology SFS-EN 14564:2013 SFS-EN 14564:en:2013 01.040.31 Elektroniikka (Sanastot) SFS-EN ISO 14880-1:2019:en, 2019-07-19 Optics and photonics. Microlens arrays. Part 1: Vocabulary (ISO 14880-1:2019)
4 / 142 SFS-EN ISO 14880-1:2016:en:2016 01.040.43 Ajoneuvot (Sanastot) SFS-EN 13878:2019:en, 2019-09-20 Matkailuajoneuvot. Termit ja määritelmät Leisure accommodation vehicles. Terms and definitions SFS-EN 13878:en:2003 01.040.79 Puuteollisuus (Sanastot) SFS-EN 844:2019:en, 2019-09-06 Round and sawn timber. Terminology SFS-EN 844-1:en:1996 SFS-EN 844-2:1997 SFS-EN 844-2:en:1997 SFS-EN 844-3:en:1995 SFS-EN 844-4:1997 SFS-EN 844-4:en:1997 SFS-EN 844-5:1997 SFS-EN 844-5:en:1997 SFS-EN 844-6:1997 SFS-EN 844-6:en:1997 SFS-EN 844-10:en:1998 SFS-EN 844-11:en:1998 SFS-EN 844-12:en:2001 01.040.85 Massa- ja paperiteollisuus (Sanastot) SFS-EN ISO 12625-1:2019:en, 2019-06-07 Tissue paper and tissue products. Part 1: Vocabulary (ISO 12625-1:2019) SFS-EN ISO 12625-1:en:2012 01.040.87 Maali- ja väriteollisuus (Sanastot) SFS-EN ISO 18451-1:2019:en, 2019-06-07 Pigments, dyestuffs and extenders. Terminology. Part 1: General terms (ISO 18451-1:2019)
5 / 142 SFS-EN ISO 18451-1:2017:en:2017 01.040.91 Rakennusmateriaalit ja rakentaminen (Sanastot) SFS-EN 12670:2019:en, 2019-06-21 Natural stone. Terminology SFS-EN 12670:2002 SFS-EN 12670:en:2002 01.040.97 Kotitalous- ja kulutustavarat. Kauppojen kalusteet. Vapaa-aika. Urheilu (Sanastot) SFS-EN 131-1:2015 + A1:2019:en, 2019-09-20 Ladders. Part 1: Terms, types, functional sizes SFS-EN 131-1:2015:2015 SFS-EN 131-1:en:2015 01.080.10 Yleisesti käytettävät kuvatunnukset ja piirrosmerkit SFS-ISO 16069:2019, 2019-06-21 Kuvatunnukset ja piirrosmerkit. Turvallisuusmerkit. Poistumisopastejärjestelmät Graphical symbols -- Safety signs -- Safety way guidance systems (SWGS) Julkaisukieli: fi/en SFS-ISO 16069:2019:en, 2019-06-21 Kuvatunnukset ja piirrosmerkit. Turvallisuusmerkit. Poistumisopastejärjestelmät Graphical symbols -- Safety signs -- Safety way guidance systems (SWGS) 01.080.20 Tietyissä laitteissa käytettävät kuvatunnukset ja piirrosmerkit SFS-ISO 16069:2019, 2019-06-21 Kuvatunnukset ja piirrosmerkit. Turvallisuusmerkit. Poistumisopastejärjestelmät Graphical symbols -- Safety signs -- Safety way guidance systems (SWGS) Julkaisukieli: fi/en SFS-ISO 16069:2019:en, 2019-06-21 Kuvatunnukset ja piirrosmerkit. Turvallisuusmerkit. Poistumisopastejärjestelmät Graphical symbols -- Safety signs -- Safety way guidance systems (SWGS)
6 / 142 01.110 Tekninen tuotedokumentointi SFS-EN IEC 81346-2:2019:en, 2019-09-13 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 2: Classification of objects and codes for classes SFS-EN 81346-2:2009:en:2009 SFS-EN 81346-2:2009 03.080.30 Kuluttajille suunnatut palvelut SFS-EN 15017:2019:en, 2019-09-20 Hautauspalvelut. Vaatimukset Funeral Services. Requirements SFS-EN 15017:2006 SFS-EN 15017:en:2006 SFS-EN 17226:2019:en, 2019-07-19 Kauneudenhoitopalvelut. Palvelun tarjoamista koskevat vaatimukset ja suositukset Beauty Salon Services. Requirements and recommendations for the provision of service SFS-EN 17229:2019:en, 2019-06-21 Kuntokeskukset. Toiminnanharjoitusta koskevat vaatimukset. Osa 1: Toimintaa ja hallintoa koskevat vaatimukset Fitness centres. Requirements for centre amenities and operation. Operational and managerial requirements 03.080.99 Muut palvelut SFS-EN 16844:2017 + A2:2019, 2019-08-16 Ulkonäön lääketieteellisen hoidon palvelut. Ei-kirurgiset hoidot Aesthetic medicine services. Non-surgical medical treatments Julkaisukieli: fi/en SFS-EN 16844:2017 + A1:2018:en:2018 SFS-EN 16844:2017 + A2:2019:en, 2019-08-16 Ulkonäön lääketieteellisen hoidon palvelut. Ei-kirurgiset hoidot Aesthetic medicine services. Non-surgical medical treatments
7 / 142 SFS-EN 16844:2017 + A1:2018:en:2018 03.100.01 Yrityksen organisaatio ja johtaminen, yleistä SFS-EN IEC 31010:2019:en, 2019-08-30 Risk management - Risk assessment techniques SFS-EN 31010:2013 03.100.70 Hallintajärjestelmät SFS-EN 16495:2019:en, 2019-07-19 Air Traffic Management. Information security for organisations supporting civil aviation operations SFS-EN 16495:en:2014 03.100.99 Muut yrityksen organisaatioon ja johtamiseen liittyvät standardit SFS-EN 15341:2019:en, 2019-09-06 Maintenance. Maintenance Key Performance Indicators SFS-EN 15341:2007 SFS-EN 15341:en:2007 03.120.20 Tuotteiden ja yritysten sertifiointi. Vaatimustenmukaisuuden arviointi SFS-EN ISO 34101-4:2019:en, 2019-06-14 Sustainable and traceable cocoa. Part 4: Requirements for certification schemes (ISO 34101-4:2019) 03.220.20 Maantiekuljetus SFS-EN ISO 17573-1:2019:en, 2019-09-13 Sähköinen maksunkeräys. Tienkäyttömaksujärjestelmän rakenne. Osa 1: Referenssimalli Electronic fee collection. System architecture for vehicle-related tolling. Part 1: Reference model (ISO 17573-1:2019)
8 / 142 03.220.50 Ilmakuljetus SFS-EN 16495:2019:en, 2019-07-19 Air Traffic Management. Information security for organisations supporting civil aviation operations SFS-EN 16495:en:2014 03.240 Postipalvelut SFS-EN 14012:2019:en, 2019-09-27 Postipalvelut. Palvelun laatu. Asiakasvalitusten käsittelyn periaatteet Postal services. Quality of service. Complaints handling principles SFS-EN 14012:2009 SFS-EN 14012:en:2009 07.060 Geologia. Meteorologia. Hydrologia SFS-EN 17211:2019:en, 2019-09-20 Water quality. Guidance on mapping of seagrasses and macroalgae in the eulittoral zone 07.100.30 Elintarvikemikrobiologia SFS-EN ISO 15216-2:2019:en, 2019-09-27 Microbiology of the food chain. Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR. Part 2: Method for detection (ISO 15216-2:2019) CEN ISO/TS 15216-2:en:2013 07.100.99 Muut mikrobiologiaan liittyvät standardit SFS-EN 13098:2019:en, 2019-09-13 Workplace exposure. Measurement of airborne microorganisms and microbial compounds. General requirements SFS-EN 13098:en:2001
9 / 142 11.020.10 Terveyspalvelut, yleistä SFS-EN 16844:2017 + A2:2019, 2019-08-16 Ulkonäön lääketieteellisen hoidon palvelut. Ei-kirurgiset hoidot Aesthetic medicine services. Non-surgical medical treatments Julkaisukieli: fi/en SFS-EN 16844:2017 + A1:2018:en:2018 SFS-EN 16844:2017 + A2:2019:en, 2019-08-16 Ulkonäön lääketieteellisen hoidon palvelut. Ei-kirurgiset hoidot Aesthetic medicine services. Non-surgical medical treatments SFS-EN 16844:2017 + A1:2018:en:2018 11.040 Terveydenhuollon laitteet SFS-EN IEC 80601-2-30:2019:en, 2019-06-07 Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers SFS-EN 80601-2-30/A1:en:2015 SFS-EN 80601-2-30:en:2011 11.040.10 Anestesia-, hengitys- ja elvytyskoneet SFS-EN ISO 20789:2019:en, 2019-09-27 Anestesia- ja hengityslaitteet. Passiiviset kostuttimet Anaesthetic and respiratory equipment. Passive humidifiers (ISO 20789:2018) SFS-EN ISO 27427:2019:en, 2019-09-27 Anestesia- ja hengityslaitteet. Sumutusjärjestelmät ja niiden osat Anaesthetic and respiratory equipment. Nebulizing systems and components (ISO 27427:2013) SFS-EN 13544-1 + A1:en:2010 SFS-EN ISO 5362:2019:en, 2019-09-27 Anesteettiset varapussit Anaesthetic reservoir bags (ISO 5362:2006)
10 / 142 SFS-EN 1820 + A1:en:2010 SFS-EN ISO 80601-2-79:2019:en, 2019-09-27 Sähkökäyttöiset lääkinnälliset laitteet. Osa 2-79: Hengityksen apuvälineiden yleistä turvallisuutta ja olennaista suorituskykyä koskevat erityisvaatimukset Medical electrical equipment. Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment (ISO 80601-2-79:2018) SFS-EN ISO 80601-2-80:2019:en, 2019-09-27 Sähkökäyttöiset lääkinnälliset laitteet. Osa 2-80: Hengityssairaan hengityslaitteiden yleistä turvallisuutta ja olennaista suorituskykyä koskevat erityisvaatimukset Medical electrical equipment. Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency (ISO 80601-2-80:2018) 11.040.20 Verensiirto-, infuusio- ja injektiolaitteet SFS-EN IEC 60601-2-16:2019:en, 2019-06-07 Medical electrical equipment - Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment SFS-EN 60601-2-16:en:2015 11.040.25 Ruiskut, neulat ja katetrit SFS-EN IEC 60601-2-16:2019:en, 2019-06-07 Medical electrical equipment - Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment SFS-EN 60601-2-16:en:2015 11.040.40 Kirurgiset implantit, proteesit ja ortoosit SFS-EN ISO 16054:2019:en, 2019-08-02 Kirurgiset implantit. Implantointitietojen tallennuksen vähimmäisvaatimukset Implants for surgery. Minimum data sets for surgical implants (ISO 16054:2019) SFS-EN ISO 16054:en:2002
11 / 142 11.040.50 Radiografiset laitteet SFS-EN 60601-2-54:2010/A2:2019:en, 2019-06-07 Sähkökäyttöiset terveydenhuollon laitteet. Osa 2-54: Turvallisuuden ja olennaisen suorituskyvyn erityisvaatimukset radiografian ja läpivalaisun röntgenlaitteille Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy 11.040.55 Diagnostiset laitteet SFS-EN 303520 V1.2.1:2019, 2019-08-09 Short Range Devices (SRD). Ultra Low Power (ULP) wireless medical capsule endoscopy devices operating in the band 430 MHz to 440 MHz. Harmonised Standard for access to radio spectrum 11.040.60 Terapialaitteet SFS-EN IEC 60601-2-76:2019:en, 2019-06-07 Medical electrical equipment - Part 2-76: Particular requirements for the basic safety and essential performance of low energy ionized gas haemostasis equipment 11.040.70 Silmälääketieteelliset laitteet SFS-EN 80601-2-58:2015/A1:2019:en, 2019-09-06 Sähkökäyttöiset terveydenhuollon laitteet. Osa 2-58: Turvallisuuden ja olennaisen suorituskyvyn erityisvaatimukset linssinpoistolaitteille ja vitrektomialaitteille silmäkirurgiaa varten Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery 11.040.99 Muut terveydenhuollon laitteet SFS-EN IEC 60601-2-39:2019:en, 2019-06-07 Medical electrical equipment - Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment SFS-EN 60601-2-39/A11:en:2012 SFS-EN 60601-2-39:en:2008
12 / 142 11.060.10 Hammashoitomateriaalit SFS-EN ISO 4049:2019:en, 2019-06-28 Hammaslääketiede. Yhdistelmämuovipohjaiset paikkamateriaalit Dentistry. Polymer-based restorative materials (ISO 4049:2019) SFS-EN ISO 4049:en:2010 11.060.20 Hammashoitovälineet SFS-EN ISO 27020:2019:en, 2019-07-19 Hammaslääketiede. Hampaanoionnassa käytettävät kiinnikkeet Dentistry. Brackets and tubes for use in orthodontics (ISO 27020:2019) SFS-EN ISO 27020:en:2011 11.080.20 Desinfiointiaineet ja antiseptiset aineet SFS-EN 13697:2015 + A1:2019:en, 2019-08-09 Kemialliset desinfektioaineet ja antiseptiset aineet. Elintarviketeollisuudessa, teollisuudessa, kotitalouksissa ja julkisissa tiloissa käytetty kvantitatiivinen pintatesti bakterisidisen ja fungisidisen tehon arvioimiseksi. Testimenetelmä (ilman mekaanista vaikutusta) ja vaatimukset (vaihe 2.2) Chemical disinfectants and antiseptics. Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas. Test method and requirements without mechanical action (phase 2, step 2) SFS-EN 13697:en:2015 SFS-EN 14476:2013 + A2:2019:en, 2019-08-02 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of virucidal activity in the medical area. Test method and requirements (Phase 2/Step 1) SFS-EN 14476 + A1:en:2015 11.140 Sairaalalaitteet ja -tarvikkeet SFS-EN 14683:2019 + AC:2019:en, 2019-08-16 Medical face masks. Requirements and test methods
13 / 142 SFS-EN 14683:2019:en:2019 11.180.01 Vammaisten apuvälineet, yleistä SFS-EN ISO 20342-1:2019:en, 2019-08-02 Apuvälineet painehaavojen ennaltaehkäisyyn makuuasennossa. Osa 1: Yleiset vaatimukset Assistive products for tissue integrity when lying down. Part 1: General Requirements (ISO 20342-1:2019) 13.020.01 Ympäristö ja ympäristönsuojelu, yleistä SFS-EN ISO 17422:2019:en, 2019-07-19 Plastics. Environmental aspects. General guidelines for their inclusion in standards (ISO 17422:2018) 13.020.10 Ympäristöasioiden hallinta SFS-EN ISO 14005:2019:en, 2019-07-19 Environmental management systems. Guidelines for a flexible approach to phased implementation (ISO 14005:2019) 13.020.20 Ympäristötalous SFS-EN 50693:2019:en, 2019-09-13 Product category rules for life cycle assessments of electronic and electrical products and systems 13.020.30 Ympäristövaikutusten arviointi SFS-EN 45558:2019:en, 2019-06-07 Yleinen menettely energiaan liittyvien tuotteiden kriittisten valmistusmateriaalien ilmoittamiselle General method to declare the use of critical raw materials in energy-related products
14 / 142 SFS-EN 45559:2019:en, 2019-06-07 Menettelytapoja energiaan liittyvien tuotteiden materiaalitehokkuustietojen ilmoittamiselle Methods for providing information relating to material efficiency aspects of energy-related products 13.020.40 Ympäristön pilaantuminen ja suojelu SFS-EN ISO 14090:2019:en, 2019-07-19 Adaptation to climate change. Principles, requirements and guidelines (ISO 14090:2019) 13.030.40 Jätehuollon ja jätteenkäsittelyn asennukset ja laitteet SFS-EN 13071-1:2019:en, 2019-07-19 Ylhäältä nostettavat ja alhaalta tyhjennettävät pyörättömät jäteastiat alle 5000 l. Osa 1: Yleiset vaatimukset Stationary waste containers up to 5 000 l, top lifted and bottom emptied. Part 1: General requirements SFS-EN 13071-1/AC:en:2010 SFS-EN 13071-1:en:2008 SFS-EN 13071-2:2019:en, 2019-07-19 Ylhäältä nostettavat ja alhaalta tyhjennettävät pyörättömät jäteastiat alle 5000 l. Osa 2: Maanalaisten tai osittain maanalaisten järjestelmien lisävaatimukset Stationary waste containers up to 5 000 l, top lifted and bottom emptied. Part 2: Additional requirements for underground or partly underground systems SFS-EN 13071-2 + A1:en:2014 13.040.30 Työpaikan ilma SFS-EN 13098:2019:en, 2019-09-13 Workplace exposure. Measurement of airborne microorganisms and microbial compounds. General requirements SFS-EN 13098:en:2001 SFS-EN ISO 22065:2019:en, 2019-07-19 Workplace air. Gases and vapours. Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2019)
15 / 142 SFS-EN 1076:en:2010 13.040.35 Puhdastilat ja puhtaat alueet SFS-EN ISO 14644-16:2019:en, 2019-06-28 Puhdastilat ja puhtaat alueet. Osa 16: Puhdastilojen ja puhdasilmalaitteiden energiatehokkuus Cleanrooms and associated controlled environments. Part 16: Energy efficiency in cleanrooms and separative devices (ISO 14644-16:2019) 13.040.40 Kiinteät päästölähteet SFS-EN 17255-1:2019:en, 2019-08-09 Stationary source emissions. Data acquisition and handling systems. Part 1: Specification of requirements for the handling and reporting of data 13.060.50 Kemiallisten aineiden analysoiminen vedestä SFS-EN ISO 5815-1:2019:en, 2019-09-27 Water quality. Determination of biochemical oxygen demand after n days (BODn). Part 1: Dilution and seeding method with allylthiourea addition (ISO 5815-1:2019) 13.060.60 Veden fysikaalisten ominaisuuksien tutkiminen SFS-EN ISO 13163:2019:en, 2019-06-14 Water quality. Lead-210. Test method using liquid scintillation counting (ISO 13163:2013) SFS-EN ISO 9697:2019:en, 2019-06-28 Water quality. Gross beta activity. Test method using thick source (ISO 9697:2018) SFS-EN ISO 9697:2017:en:2017 SFS-EN ISO 9698:2019:en, 2019-06-07 Water quality. Tritium. Test method using liquid scintillation counting (ISO 9698:2019) SFS-EN ISO 9698:en:2015
16 / 142 13.060.70 Veden biologisten ominaisuuksien tutkiminen SFS-EN 17211:2019:en, 2019-09-20 Water quality. Guidance on mapping of seagrasses and macroalgae in the eulittoral zone 13.080.99 Muut maaperän laatuun liittyvät standardit SFS-ISO 15176:2019:en, 2019-06-14 Guidance on characterization of excavated soil and other materials intended for re-use SFS-ISO 15176:en:2006 SFS-ISO 15800:2019:en, 2019-09-13 Soil quality -- Characterization of soil with respect to human exposure SFS-ISO 15800:en:2006 13.110 Koneturvallisuus SFS-EN ISO 19085-10:2019:en, 2019-06-14 Puuntyöstökoneet. Turvallisuus. Osa 10: Rakennussahat Woodworking machines. Safety. Part 10: Building site saws (contractor saws) (ISO 19085-10:2018) SFS-EN 1870-19:en:2014 SFS-EN ISO 19085-7:2019:en, 2019-07-19 Puuntyöstökoneet. Turvallisuus. Osa 7: Oikohöyläkoneet, tasohöyläkoneet ja yhdistetyt oikoja tasohöyläkoneet Woodworking machines. Safety. Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019) SFS-EN 859 + A2:en:2012 SFS-EN 860 + A2:en:2012 SFS-EN 861 + A2:en:2012 SFS-EN ISO 20607:2019, 2019-07-19 Koneturvallisuus. Käyttöohjeet. Yleiset laadintaperiaatteet Safety of machinery. Instruction handbook. General drafting principles (ISO 20607:2019) Julkaisukieli: fi/en
17 / 142 SFS-EN ISO 20607:2019:en, 2019-07-19 Koneturvallisuus. Käyttöohjeet. Yleiset laadintaperiaatteet Safety of machinery. Instruction handbook. General drafting principles (ISO 20607:2019) 13.120 Kodin turvallisuus SFS-EN 60335-1:2013/A1:2019:en, 2019-08-23 Household and similar electrical appliances - Safety - Part 1: General requirements SFS-EN 60335-1:2013/A14:2019:en, 2019-08-23 Household and similar electrical appliances - Safety - Part 1: General requirements SFS-EN 60335-1:2013/A2:2019:en, 2019-08-23 Household and similar electrical appliances - Safety - Part 1: General requirements SFS-EN 60335-2-12:2003/A11:2019:en, 2019-08-09 Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances SFS-EN 60335-2-12:2003/A2:2019:en, 2019-08-16 Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances SFS-EN 60335-2-13:2010/A1:2019:en, 2019-08-16 Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances SFS-EN 60335-2-17:2013/A11:2019:en, 2019-08-09 Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances 13.160 Ihmiseen kohdistuva tärinä ja iskut SFS-EN ISO 28927-8:2009/A2:2019:en, 2019-06-28 Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action. Amendment 2: Oscillating knives (vibrating screen removal tools) (ISO
18 / 142 28927-8:2009/Amd 2:2019) 13.180 Ergonomia SFS-EN ISO 10551:2019:en, 2019-08-09 Ergonomics of the physical environment. Subjective judgement scales for assessing physical environments (ISO 10551:2019) SFS-EN ISO 10551:en:2001 SFS-EN ISO 9241-210:2019:en, 2019-08-30 Ergonomics of human-system interaction. Part 210: Human-centred design for interactive systems (ISO 9241-210:2019) SFS-EN ISO 9241-210:2010 SFS-EN ISO 9241-210:en:2010 13.220.10 Palontorjunta SFS-EN 15182-1:2019:en, 2019-09-27 Portable equipment for projecting extinguishing agents supplied by firefighting pumps. Hand-held branchpipes for fire service use. Part 1: Common requirements SFS-EN 15182-1 + A1:en:2009 SFS-EN 15182-2:2019:en, 2019-09-27 Portable equipment for projecting extinguishing agents supplied by firefighting pumps. Hand-held branchpipes for fire service use. Part 2: Combination branchpipes PN 16 SFS-EN 15182-2 + A1:en:2009 SFS-EN 15182-3:2019:en, 2019-08-23 Portable equipment for projecting extinguishing agents supplied by firefighting pumps. Hand-held branchpipes for fire service use. Part 3: Smooth bore jet and/or one fixed spray jet angle branchpipes PN 16 SFS-EN 15182-3 + A1:en:2009
19 / 142 SFS-EN 15182-4:2019:en, 2019-08-23 Portable equipment for projecting extinguishing agents supplied by firefighting pumps. Hand-held branchpipes for fire service use. Part 4: High pressure branchpipes PN 40 SFS-EN 15182-4 + A1:en:2009 SFS-EN 1869:2019:en, 2019-08-23 Fire blankets SFS-EN 1869:en:1997 13.220.20 Palosuojelu SFS-EN 14972-16:2019:en, 2019-09-06 Fixed firefighting systems. Water mist systems. Part 16: Test protocol for industrial oil cookers for open nozzle systems 13.220.40 Aineiden ja tuotteiden syttyvyys ja palo-ominaisuudet SFS-EN 15659:2019:en, 2019-08-16 Secure storage units. Classification and methods of test for resistance to fire. Light fire storage units SFS-EN 15659:en:2009 SFS-EN IEC 60331-1:2019:en, 2019-09-06 Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 C for cables of rated voltage up to and including 0,6/1,0 kv and with an overall diameter exceeding 20 mm SFS-EN 50362:en:2003 SFS-EN IEC 60754-3:2019:en, 2019-09-06 Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content by ion chromatography SFS-EN IEC 61482-1-1:2019:en, 2019-09-13 Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-1: Test methods - Method 1: Determination of the arc rating (ELIM, ATPV and/or EBT) of
20 / 142 clothing materials and of protective clothing using an open arc SFS-EN 61482-1-1:en:2010 13.220.50 Rakennusmateriaalien ja -elementtien palonkesto SFS-EN 13381-7:2019:en, 2019-06-28 Test methods for determining the contribution to the fire resistance of structural members. Part 7: Applied protection to timber members SFS-EN 15254-3:2019:en, 2019-08-30 Extended application of results from fire resistance tests. Non-loadbearing walls. Part 3: Lightweight partitions SFS-EN 15269-1:2019:en, 2019-06-21 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware. Part 1: General requirements SFS-EN 15269-1:en:2010 13.230 Räjähdysten torjunta SFS-EN 1127-1:2019:en, 2019-08-23 Räjähdysvaaralliset tilat. Räjähdyksen esto ja suojaus. Osa 1: Peruskäsitteet ja menetelmät Explosive atmospheres. Explosion prevention and protection. Part 1: Basic concepts and methodology SFS-EN 1127-1:2011 SFS-EN 1127-1:en:2011 13.240 Ylipaineelta suojautuminen SFS-EN ISO 4126-1:2013/A2:2019:en, 2019-06-14 Safety devices for protection against excessive pressure. Part 1: Safety valves (ISO 4126-1:2013)
21 / 142 13.280 Säteilyltä suojautuminen SFS-EN ISO 16637:2019:en, 2019-06-21 Radiological protection. Monitoring and internal dosimetry for staff members exposed to medical radionuclides as unsealed sources (ISO 16637:2016) SFS-EN ISO 16639:2019:en, 2019-06-21 Surveillance of the activity concentrations of airborne radioactive substances in the workplace of nuclear facilities (ISO 16639:2017) SFS-EN ISO 16645:2019:en, 2019-06-21 Radiological protection. Medical electron accelerators. Requirements and recommendations for shielding design and evaluation (ISO 16645:2016) SFS-EN ISO 18417:2019:en, 2019-06-21 Iodine charcoal sorbents for nuclear facilities. Method for defining sorption capacity index (ISO 18417:2017) SFS-EN ISO 9698:2019:en, 2019-06-07 Water quality. Tritium. Test method using liquid scintillation counting (ISO 9698:2019) SFS-EN ISO 9698:en:2015 13.300 Vaarallisilta aineilta suojautuminen SFS-EN 14564:2019:en, 2019-08-16 Vaarallisten aineiden kuljetussäiliöt. Termistö Tanks for transport of dangerous goods. Terminology SFS-EN 14564:2013 SFS-EN 14564:en:2013 13.310 Rikosten torjunta SFS-EN 1047-1:2019:en, 2019-08-30 Secure storage units. Classification and methods of test for resistance to fire. Part 1: Data cabinets and data inserts SFS-EN 1047-1:en:2006
22 / 142 SFS-EN 15659:2019:en, 2019-08-16 Secure storage units. Classification and methods of test for resistance to fire. Light fire storage units SFS-EN 15659:en:2009 13.320 Hälytys- ja varoitusjärjestelmät SFS-EN 50194-2:2019:en, 2019-06-07 Electrical apparatus for the detection of combustible gases in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requirements SFS-EN 50194-2:2007/A1:2016:2016 SFS-EN 50194-2:en:2007 SFS-EN 50291-2:2019:en, 2019-09-13 Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements SFS-EN 50291-2:en:2011 SFS-EN 50518:2019, 2019-08-30 Valvonta- ja hälytyskeskus Monitoring and Alarm Receiving Centre Julkaisukieli: fi/en SFS-EN 50518-1:2014 SFS-EN 50518-1:en:2014 SFS-EN 50518-2:2014 SFS-EN 50518-2:en:2014 SFS-EN 50518-3:2014 SFS-EN 50518-3:en:2014 SFS-EN 50518:2019:en, 2019-08-30 Valvonta- ja hälytyskeskus Monitoring and Alarm Receiving Centre SFS-EN 50518-1:2014
23 / 142 SFS-EN 50518-1:en:2014 SFS-EN 50518-2:2014 SFS-EN 50518-2:en:2014 SFS-EN 50518-3:2014 SFS-EN 50518-3:en:2014 SFS-EN IEC 62676-2-31:2019:en, 2019-09-13 Video surveillance systems for use in security applications - Part 2-31: Live streaming and control based on web services SFS-EN IEC 62676-2-32:2019:en, 2019-09-13 Video surveillance systems for use in security applications - Part 2-32: Recording control and replay based on web services 13.340.10 Suojavaatetus SFS-EN ISO 11393-5:2019:en, 2019-08-02 Moottorisahan käyttäjien suojavaatteet. Osa 5: Nilkkaimien vaatimukset ja testausmenetelmät Protective clothing for users of hand-held chainsaws. Part 5: Performance requirements and test methods for protective gaiters (ISO 11393-5:2018) SFS-EN 381-8:en:1997 SFS-EN 381-9:en:1997 SFS-EN ISO 11393-6:2019:en, 2019-08-02 Moottorisahan käyttäjien suojavaatteet. Osa 6: Vartalon yläosan suojainten vaatimukset ja testausmenetelmät Protective clothing for users of hand-held chainsaws. Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018) SFS-EN 381-10:en:2003 SFS-EN 381-11:2003 SFS-EN 381-11:en:2003 13.340.30 Hengityksensuojaimet SFS-EN 13274-2:2019:en, 2019-08-23 Respiratory protective devices. Methods of test. Part 2: Practical performance tests SFS-EN 13274-2:en:2001
24 / 142 SFS-EN 13274-7:2019:en, 2019-06-28 Respiratory protective devices. Methods of test. Part 7: Determination of particle filter penetration SFS-EN 13274-7:en:2008 17.040.20 Pintojen ominaisuudet SFS-EN 13036-5:2019:en, 2019-09-13 Road and airfield surface characteristics. Test methods. Part 5: Determination of longitudinal unevenness indices 17.040.30 Mittauslaitteet SFS-EN ISO 13385-1:2019:en, 2019-09-27 Geometrical product specifications (GPS). Dimensional measuring equipment. Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) SFS-EN ISO 13385-1:en:2011 17.040.40 Geometrinen tuotemäärittely (GPS) SFS-EN ISO 25178-73:2019:en, 2019-06-21 Geometrical product specifications (GPS). Surface texture: Areal. Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) 17.120.20 Virtaus avoimissa kanavissa SFS-EN 60704-3:2019:en, 2019-08-23 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values SFS-EN 60704-3:en:2006 17.140.20 Koneiden ja laitteiden aiheuttama melu SFS-EN 13487:2019:en, 2019-08-16 Heat exchanger. Forced convection air cooled refrigerant condensers and dry coolers. Sound measurement
25 / 142 SFS-EN 13487:en:2004 SFS-EN 60704-2-3:2019/A11:2019:en, 2019-08-23 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers SFS-EN 60704-2-3:2019:en, 2019-08-23 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers SFS-EN 60704-2-3:en:2002 SFS-EN 60704-2-3/A1:en:2005 SFS-EN IEC 60704-2-16:2019:en, 2019-08-02 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-16: Particular requirements for washer-dryers SFS-EN ISO 20361:2019:en, 2019-09-20 Pumput ja pumppuyksiköt nesteille. Melunmittausmenetelmä. Tarkkuusluokat 2 ja 3 Liquid pumps and pumps units. Noise test code. Grades 2 and 3 of accuracy (ISO 20361:2019) SFS-EN ISO 20361:en:2015 17.180.20 Värit ja valon mittaus SFS-EN 13032-4:2015 + A1:2019:en, 2019-07-19 Valo ja valaistus. Valonlähteiden ja valaisimien valotekniset tiedot. Osa 4: Ledilamput, - moduulit ja -valaisimet Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. Part 4: LED lamps, modules and luminaires SFS-EN 13032-4:en:2015 SFS-EN ISO/CIE 11664-1:2019:en, 2019-08-02 Colorimetry. Part 1: CIE standard colorimetric observers (ISO/CIE 11664-1:2019) SFS-EN ISO 11664-1:en:2011
26 / 142 SFS-EN ISO/CIE 11664-3:2019:en, 2019-08-02 Colorimetry. Part 3: CIE tristimulus values (ISO/CIE 11664-3:2019) SFS-EN ISO 11664-3:en:2013 SFS-EN ISO/CIE 11664-4:2019:en, 2019-08-02 Colorimetry. Part 4: CIE 1976 L*a*b* colour space (ISO/CIE 11664-4:2019) SFS-EN ISO 11664-4:en:2011 17.200.20 Lämpötilanmittauslaitteet SFS-EN IEC 61869-14:2019:en, 2019-07-19 Instrument transformers - Part 14: Additional requirements for current transformers for DC applications 17.220.20 Sähköisten ja magneettisten suureiden mittaus SFS-EN IEC 61869-15:2019:en, 2019-07-19 Instrument transformers - Part 15: Additional requirements for voltage transformers for DC applications SFS-EN IEC 61869-9:2019:en, 2019-07-19 Instrument transformers - Part 9: Digital interface for instrument transformers 17.240 Säteilyn mittaus SFS-EN ISO 13163:2019:en, 2019-06-14 Water quality. Lead-210. Test method using liquid scintillation counting (ISO 13163:2013) SFS-EN ISO 21484:2019:en, 2019-06-21 Nuclear Energy. Fuel technology. Determination of the O/M ratio in MOX pellets by the gravimetric method (ISO 21484:2017) SFS-EN ISO 9697:2019:en, 2019-06-28 Water quality. Gross beta activity. Test method using thick source (ISO 9697:2018) SFS-EN ISO 9697:2017:en:2017
27 / 142 19.040 Ympäristötestaus SFS-EN 60068-2-67:1996/A1:2019:en, 2019-09-13 Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components SFS-EN 60068-2-69:2017/A1:2019:en, 2019-09-06 Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method SFS-EN IEC 60068-2-82:2019:en, 2019-07-19 Environmental testing - Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies SFS-EN 60068-2-82:en:2009 SFS-EN IEC 60068-2-85:2019:en, 2019-09-06 Environmental testing - Part 2-85: Tests - Test Fj: Vibration - Long time history replication SFS-EN IEC 60721-3-3:2019:en, 2019-08-09 Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations SFS-EN 60721-3-3:1996 SFS-EN 60721-3-3/A2:en:1997 SFS-EN 60721-3-3:en:1996 SFS-EN IEC 60721-3-4:2019:en, 2019-08-09 Classification of environmental conditions - Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations SFS-EN 60721-3-4/A1:en:1997 SFS-EN 60721-3-4:en:1995 SFS-EN IEC 61207-3:2019:en, 2019-09-06 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
28 / 142 SFS-EN 61207-3:en:2003 19.100 Rikkomaton aineenkoetus SFS-EN ISO 12718:2019:en, 2019-09-20 Rikkomaton aineenkoetus. Pyörrevirtatarkastus. Sanasto Non-destructive testing. Eddy current testing. Vocabulary (ISO 12718:2019) SFS-EN ISO 12718:2009 SFS-EN ISO 12718:en:2009 SFS-EN ISO 16809:2019, 2019-06-14 Rikkomaton aineenkoetus. Paksuusmittaus ultraäänellä Non-destructive testing. Ultrasonic thickness measurement (ISO 16809:2017) Julkaisukieli: fi/en SFS-EN 14127:2011 SFS-EN 14127:en:2011 SFS-EN ISO 16809:2019:en, 2019-06-14 Rikkomaton aineenkoetus. Paksuusmittaus ultraäänellä Non-destructive testing. Ultrasonic thickness measurement (ISO 16809:2017) SFS-EN 14127:2011 SFS-EN 14127:en:2011 21.020 Koneiden, kojeiden ja laitteiden ominaisuudet ja rakenne SFS-EN IEC 62402:2019:en, 2019-08-02 Obsolescence management SFS-EN 62402:en:2009 21.060.01 Kiinnittimet, yleistä SFS-EN ISO 3269:2019:en, 2019-09-27 Fasteners. Acceptance inspection (ISO 3269:2019) SFS-EN ISO 3269:en:2001
29 / 142 21.060.10 Pultit, ruuvit ja vaarnaruuvit SFS-EN ISO 15480:2019:en, 2019-07-19 Kuusiokantaiset laipalliset kierteittävät levyruuvit Fasteners. Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019) SFS-EN ISO 15480:en:2000 SFS-EN ISO 7053:2019:en, 2019-07-19 Fasteners. Hexagon washer head tapping screws (ISO 7053:2019) SFS-EN ISO 7053:en:2011 23.020.20 Ajoneuvoihin asennetut säiliöt SFS-EN 14564:2019:en, 2019-08-16 Vaarallisten aineiden kuljetussäiliöt. Termistö Tanks for transport of dangerous goods. Terminology SFS-EN 14564:2013 SFS-EN 14564:en:2013 23.020.35 Kaasupullot SFS-EN 12807:2019:en, 2019-07-19 LPG equipment and accessories. Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction SFS-EN 12807:en:2009 SFS-EN ISO 10462:2014/A1:2019:en, 2019-09-06 Kaasupullot. Asetyleenipullot. Määräaikaistarkastus ja huolto Gas cylinders. Acetylene cylinders. Periodic inspection and maintenance. Amendment 1 (ISO 10462:2013/Amd 1:2019) SFS-EN ISO 14245:2019:en, 2019-09-27 Kaasupullot. Nestekaasupulloventtiilien vaatimukset ja testaus. Painoventtiili Gas cylinders. Specifications and testing of LPG cylinder valves. Self-closing (ISO 14245:2019)
30 / 142 SFS-EN ISO 14245:en:2010 SFS-EN ISO 14456:2016/A1:2019:en, 2019-07-19 Gas cylinders. Gas properties and associated classification (FTSC) codes. Amendment 1 (ISO 14456:2015/Amd 1:2019) SFS-EN ISO 15995:2019:en, 2019-09-27 Gas cylinders. Specifications and testing of LPG cylinder valves. Manually operated (ISO 15995:2019) SFS-EN ISO 15995:en:2010 23.040.01 Putkistot ja niiden osat, yleistä SFS-EN 1401-1:2019:en, 2019-07-19 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U). Part 1: Specifications for pipes, fittings and the system SFS-EN 1401-1:2009:2009 SFS-EN 1401-1:en:2009 SFS-EN 17150:2019:en, 2019-08-30 Plastics piping systems for non-pressure underground conveyance and storage of nonpotable water. Test method for determination of short-term compression strength of boxes SFS-EN 17151:2019:en, 2019-08-30 Plastics piping systems for non-pressure underground conveyance and storage of nonpotable water. Test method for determination of long-term compression strength of boxes SFS-EN 17152-1:2019:en, 2019-08-30 Plastics piping systems for non-pressure underground conveyance and storage of nonpotable water. Boxes used for infiltration, attenuation and storage systems. Part 1: Specifications for storm water boxes made of PP and PVC-U
31 / 142 23.040.70 Letkut ja letkukokoonpanot SFS-EN ISO 1403:2019:en, 2019-09-13 Rubber hoses, textile-reinforced, for general-purpose water applications. Specification (ISO 1403:2019) SFS-EN ISO 1403:en:2009 23.040.99 Muut putkistojen osat SFS-EN 12954:2019:en, 2019-08-30 General principles of cathodic protection of buried or immersed onshore metallic structures SFS-EN 12954:en:2001 23.060.10 Istukkaventtiilit SFS-EN ISO 21787:2006/A1:2019:en, 2019-08-23 Industrial valves. Globe valves of thermoplastics materials. Amendment 1 (ISO 21787:2006/Amd 1:2019) 23.060.20 Pallo- ja tulppaventtiilit SFS-EN ISO 16135:2006/A1:2019:en, 2019-08-23 Industrial valves. Ball valves of thermoplastics materials. Amendment 1 (ISO 16135:2006/Amd 1:2019) 23.060.30 Luistiventtiilit SFS-EN ISO 16139:2006/A1:2019:en, 2019-08-23 Industrial valves. Gate valves of thermoplastics materials. Amendment 1 (ISO 16139:2006/Amd 1:2019) 23.060.40 Paineensäätimet SFS-EN 14382:2019:en, 2019-08-30 Kaasun sulkulaitteet, joiden tulopaine on enintään 100 bar Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar)
32 / 142 SFS-EN 14382 + A1/AC:en:2009 SFS-EN 14382 + A1:en:2009 SFS-EN 334:2019:en, 2019-08-30 Kaasun paineensäätimet. Tulopaine enintään 100 bar Gas pressure regulators for inlet pressure up to 10 MPa (100 bar) SFS-EN 334 + A1:en:2009 23.060.50 Takaiskuventtiilit SFS-EN ISO 16137:2006/A1:2019:en, 2019-08-23 Industrial valves. Check valves of thermoplastics materials. Amendment 1 (ISO 16137:2006/Amd 1:2019) SFS-EN ISO 16137:en:2006 23.060.99 Muut venttiilit SFS-EN ISO 16136:2006/A1:2019:en, 2019-08-23 Industrial valves. Butterfly valves of thermoplastics materials. Amendment 1 (ISO 16136:2006/Amd 1:2019) SFS-EN ISO 16138:2006/A1:2019:en, 2019-08-23 Industrial valves. Diaphragm valves of thermoplastics materials. Amendment 1 (ISO 16138:2006/Amd 1:2019) 23.080 Pumput SFS-EN ISO 20361:2019:en, 2019-09-20 Pumput ja pumppuyksiköt nesteille. Melunmittausmenetelmä. Tarkkuusluokat 2 ja 3 Liquid pumps and pumps units. Noise test code. Grades 2 and 3 of accuracy (ISO 20361:2019) SFS-EN ISO 20361:en:2015 25.040.40 Teollisuusprosessien mittaus ja ohjaus SFS-EN IEC 61131-10:2019:en, 2019-08-02 Programmable controllers - Part 10: PLC open XML exchange format
33 / 142 SFS-EN IEC 61158-1:2019:en, 2019-06-14 Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series SFS-EN 61158-1:en:2014 SFS-EN IEC 61158-3-12:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements SFS-EN 61158-3-12:en:2014 SFS-EN IEC 61158-3-19:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer service definition - Type 19 elements SFS-EN 61158-3-19:en:2014 SFS-EN IEC 61158-3-21:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 3-21: Data-link layer service definition - Type 21 elements SFS-EN 61158-3-21:en:2012 SFS-EN IEC 61158-3-25:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 3-25: Data-link layer service definition - Type 25 elements SFS-EN 61158-3-2:2008 SFS-EN 61158-3-3:en:2014 SFS-EN 61158-3-4:en:2014 SFS-EN 61158-3-12:en:2014 SFS-EN IEC 61158-3-4:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements SFS-EN 61158-3-4:en:2014
34 / 142 SFS-EN IEC 61158-4-12:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elements SFS-EN 61158-4-12:en:2014 SFS-EN IEC 61158-4-19:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 4-19: Data-link layer protocol specification - Type 19 elements SFS-EN 61158-4-19:en:2014 SFS-EN IEC 61158-4-2:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 4-2: Data-link layer protocol specification - Type 2 elements SFS-EN 61158-4-2:en:2014 SFS-EN IEC 61158-4-21:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 4-21: Data-link layer protocol specification - Type 21 elements SFS-EN 61158-4-21:en:2012 SFS-EN IEC 61158-4-24:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 4-24: Data-link layer protocol specification - Type 24 elements SFS-EN 61158-4-24:en:2014 SFS-EN IEC 61158-4-25:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 4-25: Data-link layer protocol specification - Type 25 elements SFS-EN 61158-4-2:en:2014 SFS-EN 61158-4-3:en:2014 SFS-EN 61158-4-4:en:2014 SFS-EN 61158-4-12:en:2014
35 / 142 SFS-EN IEC 61158-4-3:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements SFS-EN 61158-4-3:en:2014 SFS-EN IEC 61158-4-4:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 4-4: Data-link layer protocol specification - Type 4 elements SFS-EN 61158-4-4:en:2014 SFS-EN IEC 61158-5-10:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 elements SFS-EN 61158-5-10:en:2014 SFS-EN IEC 61158-5-12:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements SFS-EN 61158-5-12:en:2014 SFS-EN IEC 61158-5-19:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements SFS-EN 61158-5-19:en:2014 SFS-EN IEC 61158-5-2:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements SFS-EN 61158-5-2:en:2014 SFS-EN IEC 61158-5-21:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 5-21: Application layer
36 / 142 service definition - Type 21 elements SFS-EN 61158-5-21:en:2012 SFS-EN IEC 61158-5-23:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23 elements SFS-EN 61158-5-23:en:2014 SFS-EN IEC 61158-5-25:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 5-25: Application layer service definition - Type 25 elements SFS-EN IEC 61158-5-26:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 5-26: Application layer service definition - Type 26 elements SFS-EN 61158-5-2:en:2014 SFS-EN 61158-5-3:en:2014 SFS-EN 61158-5-4:en:2014 SFS-EN 61158-5-10:en:2014 SFS-EN IEC 61158-5-4:2019:en, 2019-07-19 Industrial communication networks - Fieldbus specifications - Part 5-4: Application layer service definition - Type 4 elements SFS-EN 61158-5-4:en:2014 SFS-EN IEC 61158-6-10:2019:en, 2019-09-06 Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements SFS-EN 61158-6-10:en:2014 SFS-EN IEC 61158-6-12:2019:en, 2019-09-06 Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements
37 / 142 SFS-EN 61158-6-12:en:2014 SFS-EN IEC 61158-6-19:2019:en, 2019-09-06 Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19 elements SFS-EN 61158-6-19:en:2014 SFS-EN IEC 61158-6-2:2019:en, 2019-09-06 Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2 elements SFS-EN 61158-6-2:en:2014 SFS-EN IEC 61158-6-21:2019:en, 2019-09-06 Industrial communication networks - Fieldbus specifications - Part 6-21: Application layer protocol specification - Type 21 elements SFS-EN 61158-6-21:en:2012 SFS-EN IEC 61158-6-23:2019:en, 2019-09-06 Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23 elements SFS-EN 61158-6-23:en:2014 SFS-EN IEC 61158-6-25:2019:en, 2019-09-06 Industrial communication networks - Fieldbus specifications - Part 6-25: Application layer protocol specification - Type 25 elements SFS-EN IEC 61158-6-26:2019:en, 2019-09-06 Industrial communication networks - Fieldbus specifications - Part 6-26: Application layer protocol specification - Type 26 elements SFS-EN IEC 61158-6-3:2019:en, 2019-09-06 Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements
38 / 142 SFS-EN 61158-6-3:en:2014 SFS-EN IEC 61158-6-4:2019:en, 2019-09-06 Industrial communication networks - Fieldbus specifications - Part 6-4: Application layer protocol specification - Type 4 elements SFS-EN 61158-6-4:en:2014 25.140.10 Paineilmatyökalut SFS-EN ISO 28927-8:2009/A2:2019:en, 2019-06-28 Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action. Amendment 2: Oscillating knives (vibrating screen removal tools) (ISO 28927-8:2009/Amd 2:2019) 25.140.20 Sähkötyökalut SFS-EN 62841-2-1:2018/A11:2019:en, 2019-08-23 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills SFS-EN 62841-2-21:2019:en, 2019-06-14 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners SFS-EN 60745-2-21/A1:en:2011 SFS-EN 60745-2-21:en:2010 SFS-EN 62841-3-12:2019:en, 2019-07-19 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines SFS-EN 62841-4-2:2019:en, 2019-07-19 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers
39 / 142 25.160.10 Hitsausprosessit SFS-EN ISO 15614-1:2017/A1:2019:en, 2019-08-30 Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys. Amendment 1 (ISO 15614-1:2017/Amd 1:2019) SFS-EN ISO 15620:2019:en, 2019-06-28 Hitsaus. Metallisten materiaalien kitkahitsaus Welding. Friction welding of metallic materials (ISO 15620:2019) SFS-EN ISO 15620:en:2000 25.160.30 Hitsauslaitteet SFS-EN ISO 5171:2019:en, 2019-06-07 Gas welding equipment. Pressure gauges used in welding, cutting and allied processes (ISO 5171:2019) SFS-EN ISO 5171:2010 SFS-EN ISO 5171:en:2010 25.160.40 Hitsausliitokset ja hitsit SFS-EN 13100-2:2019:en, 2019-09-13 Non-destructive testing of welded joints in thermoplastics semi- finished products. Part 2: X- ray radiographic testing SFS-EN 13100-2:en:2005 SFS-EN ISO 18592:2019:en, 2019-09-27 Resistance welding. Destructive testing of welds. Method for the fatigue testing of multi-spotwelded specimens (ISO 18592:2019) SFS-EN ISO 18592:en:2010 25.220.60 Orgaaniset pinnoitteet SFS-EN 13523-11:2019:en, 2019-09-27 Coil coated metals. Test methods. Part 11: Resistance to solvents (rubbing test)
40 / 142 SFS-EN 13523-11:en:2011 SFS-EN 13523-17:2019:en, 2019-09-27 Coil coated metals. Test methods. Part 17: Adhesion of strippable films SFS-EN 13523-17:en:2012 SFS-EN 13523-19:2019:en, 2019-09-27 Coil coated metals. Test methods. Part 19: Panel design and method of atmospheric exposure testing SFS-EN 13523-19:en:2011 27.010 Energian- ja lämmönsiirtotekniikka, yleistä SFS-EN 17267:2019:en, 2019-09-06 Energy measurement and monitoring plan. Design and implementation. Principles for energy data collection 27.060.20 Kaasupolttimet SFS-EN 521:2019 + AC:2019:en, 2019-08-16 Specifications for dedicated liquefied petroleum gas appliances. Portable vapour pressure liquefied petroleum gas appliances SFS-EN 521:2019:en:2019 27.060.30 Kattilat ja lämmönvaihtimet SFS-EN 13487:2019:en, 2019-08-16 Heat exchanger. Forced convection air cooled refrigerant condensers and dry coolers. Sound measurement SFS-EN 13487:en:2004