1 SFS:n luettelo 2/2019 Sisällys Uudet SFS-standardit s. 1 Kumotut SFS-standardit s. 76 Uudet CENin julkaisut s. 76 WTO-tietopiste 80 Uudet SFS-standardit Tässä luettelossa mainitaan tammi-maaliskuussa 2019 vahvistetut SFS-standardit SFS-ICS-ryhmittäin. Merkintä /A1 tunnuksen lopussa tarkoittaa, että kyseessä on lisäys A1 alkuperäiseen standardiin. Merkintä +A1 tunnuksen lopussa tarkoittaa, että standardi sisältää muutoksen A 1. Standardin tunnuksen jälkeen on mainittu vahvistuspäivä. Standardit, jotka uusi standardi korvaa, on mainittu kunkin uuden standardin tiedoissa. Standardeja voi ladata omalle koneelle sekä tilata painettuna tai pdf-tiedostona SFS:n verkkokaupasta sales.sfs.fi. Niitä voi tilata myös SFS:n asiakaspalvelusta (sales@sfs.fi tai puh. 09 1499 3353). Englanninkieliset versiot julkaistaan noin viikon kuluttua vahvistamispäivästä. Osa standardeista käännetään suomeksi. Niiden julkaisuaikataulun voi tarkistaa SFS:n tietopalvelusta (info@sfs.fi). Osa standardeista liittyy CE-merkintää edellyttäviin uuden lähestymistavan direktiiveihin. 01.040.11 Terveydenhuollon teknologia (Sanastot) SFS-EN ISO 13666:2019:en, 2019-03-29 Silmälääketieteellinen optiikka. Piilolinssit. Sanasto Ophthalmic optics. Spectacle lenses. Vocabulary (ISO 13666:2019) SFS-EN ISO 13666:en:2013 01.040.25 Valmistustekniikka (Sanastot) SFS-EN ISO 17677-1:2019:en, 2019-03-29 Resistance welding. Vocabulary. Part 1: Spot, projection and seam welding (ISO 17677-1:2019) SFS-EN ISO 17677-1:en:2009
2 01.040.43 Ajoneuvot (Sanastot) SFS-ISO 26262-1:2019:en, 2019-03-01 Tieajoneuvot. Toiminnallinen turvallisuus. Osa 1: Sanasto Road vehicles -- Functional safety -- Part 1: Vocabulary 01.040.45 Rautatietekniikka (Sanastot) SFS-EN 17018:2019:en, 2019-03-08 Kiskoliikenne. Liikkuvan kaluston huolto. Termit ja määritelmät Railway applications. Rolling stock maintenance. Terms and definitions 01.040.53 Materiaalin käsittelylaitteet (Sanastot) SFS-EN ISO 21183-2:2019:en, 2019-01-04 Light conveyor belts. Part 2: List of equivalent terms (ISO 21183-2:2018) SFS-EN ISO 21183-2:en:2007 01.110 Tekninen tuotedokumentointi SFS-EN IEC 62474:2019:en, 2019-02-22 Material declaration for products of and for the electrotechnical industry SFS-EN 62474:en:2012 01.120 Standardisointi. Yleissäännöt SFS 5825:2019, 2019-02-15 Sähkölaitteiston varmennustarkastus Verification inspection of electrical installation Julkaisukieli: fi SFS 5825:2006 SFS-EN 17161:2019:en, 2019-03-15 Esteettömyys. Tuotteiden, esineiden ja palveluiden saavutettavuus esteettömyys-lähtöisen suunnittelun seurauksena. Käyttäjäkunnan laajentaminen Design for All. Accessibility following a Design for All approach in products, goods and services. Extending the range of users
3 03.100.30 Henkilöstöjohtaminen SFS-ISO 18436-1:2019:en, 2019-01-18 Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 1: Requirements for assessment bodies and the assessment process SFS-ISO 18436-1/AC:en:2011 SFS-ISO 18436-1:en:2011 SFS-ISO 30414:2019:en, 2019-02-01 Human resource management -- Guidelines for internal and external human capital reporting 03.220.20 Maantiekuljetus SFS-EN ISO 17264:2010/A1:2019:en, 2019-03-22 Älykkään liikenteen järjestelmät. Ajoneuvojen ja laitteiden automaattinen tunnistus. Rajapinnat Intelligent transport systems. Automatic vehicle and equipment identification. Interfaces. Amendment 1 (ISO 17264:2009/Amd 1:2019) 07.100.30 Elintarvikemikrobiologia SFS-EN ISO 22117:2019:en, 2019-03-29 Microbiology of the food chain. Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019) CEN ISO/TS 22117:en:2010 07.100.40 Kosmetiikan mikrobiologia SFS-EN ISO 11930:2019:en, 2019-02-22 Kosmetiikka. Mikrobiologia. Kosmetiikkatuotteen antimikrobisen suojauksen arviointi Cosmetics. Microbiology. Evaluation of the antimicrobial protection of a cosmetic product (ISO 11930:2019) SFS-EN ISO 11930:en:2012 11.040.10 Anestesia-, hengitys- ja elvytyskoneet SFS-EN ISO 10079-1:2015/A1:2019:en, 2019-02-08 Sairaalaimulaitteet. Osa 1: Sähkökäyttöiset imulaitteet. Muutos 1: Käyttövaatimukset äärimmäisissä lämpötiloissa Medical suction equipment. Part 1: Electrically powered suction equipment. Amendment 1: Changes to requirements for operating at extremes of temperature (ISO 10079-1:2015/Amd 1:2018)
4 SFS-EN ISO 10524-1:2019:en, 2019-02-08 Sairaalakaasujen kanssa käytettävät paineensäätimet. Osa 1: Paineensäätimet sekä virtausnopeusmittarilla varustetut paineensäätimet Pressure regulators for use with medical gases. Part 1: Pressure regulators and pressure regulators with flowmetering devices (ISO 10524-1:2018) SFS-EN ISO 10524-1:en:2006 SFS-EN ISO 10524-2:2019:en, 2019-02-08 Sairaalakaasujen kanssa käytettävät paineensäätimet. Osa 2: Kokoojaputkissa ja -putkistoissa käytettävät paineensäätimet Pressure regulators for use with medical gases. Part 2: Manifold and line pressure regulators (ISO 10524-2:2018) SFS-EN ISO 10524-2:en:2006 SFS-EN ISO 10524-3:2019:en, 2019-02-08 Sairaalakaasujen kanssa käytettävät paineensäätimet. Osa 3: Pulloventtiileiden paineensäätimet Pressure regulators for use with medical gases. Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO 10524-3:2019) SFS-EN ISO 10524-3/A1:en:2013 SFS-EN ISO 10524-3:en:2006 SFS-EN ISO 7396-1:2016/A1:2019:en, 2019-02-08 Sairaalakaasuputkistot. Osa 1: Paineistettujen sairaalakaasujen ja alipaineen putkistot Medical gas pipeline systems. Part 1: Pipeline systems for compressed medical gases and vacuum. Amendment 1 (ISO 7396-1:2016/Amd 1:2017) 11.040.20 Verensiirto-, infuusio- ja injektiolaitteet SFS-EN 60601-2-40:2019:en, 2019-01-25 Sähkökäyttöiset terveydenhuollon laitteet. Osa 2-40: Turvallisuuden ja olennaisen suorituskyvyn erityisvaatimukset elektromyografialaitteille ja herätepotentiaalilaitteille Medical electrical equipment - Part 2-40: Particular requirements for the basic safety and essential performance of electromyographs and evoked response equipment SFS-EN 60601-2-40:en:1998 SFS-EN ISO 15747:2019:en, 2019-03-15 Suonensisäisten ruiskeiden muovipakkaukset
5 Plastic containers for intravenous injections (ISO 15747:2018) SFS-EN ISO 15747:en:2012 11.040.25 Ruiskut, neulat ja katetrit SFS-EN ISO 7886-4:2019:en, 2019-03-15 Steriilit kertakäyttöiset injektioruiskut. Osa 4: Ruiskut joiden uudelleenkäyttö on estetty Sterile hypodermic syringes for single use. Part 4: Syringes with re-use prevention feature (ISO 7886-4:2018) SFS-EN ISO 7886-4:en:2010 11.040.40 Kirurgiset implantit, proteesit ja ortoosit SFS-EN ISO 23500-1:2019:en, 2019-03-29 Ohjeita hemodialyysinesteiden ja vastaavien nesteiden valmistukseen ja laadunhallintaan. Osa 1: Yleiset vaatimukset Preparation and quality management of fluids for haemodialysis and related therapies. Part 1: General requirements (ISO 23500-1:2019) SFS-EN ISO 23500:en:2015 SFS-EN ISO 23500-2:2019:en, 2019-03-29 Ohjeita hemodialyysinesteiden ja vastaavien nesteiden valmistukseen ja laadunhallintaan. Osa 2: Vedenkäsittelylaitteet Preparation and quality management of fluids for haemodialysis and related therapies. Part 2: Water treatment equipment for haemodialysis applications and related therapies (ISO 23500-2:2019) SFS-EN ISO 26722:en:2015 SFS-EN ISO 23500-3:2019:en, 2019-03-29 Ohjeita hemodialyysinesteiden ja vastaavien nesteiden valmistukseen ja laadunhallintaan. Osa 3: Vesi Preparation and quality management of fluids for haemodialysis and related therapies. Part 3: Water for haemodialysis and related therapies (ISO 23500-3:2019) SFS-EN ISO 13959:en:2015 SFS-EN ISO 23500-4:2019:en, 2019-03-29 Ohjeita hemodialyysinesteiden ja vastaavien nesteiden valmistukseen ja laadunhallintaan. Osa 4: Konsentraatit Preparation and quality management of fluids for haemodialysis and related therapies. Part 4: Concentrates for haemodialysis and related therapies (ISO 23500-4:2019)
6 SFS-EN ISO 13958:en:2015 SFS-EN ISO 23500-5:2019:en, 2019-03-29 Ohjeita hemodialyysinesteiden ja vastaavien nesteiden valmistukseen ja laadunhallintaan. Osa 5: Laatu Preparation and quality management of fluids for haemodialysis and related therapies. Part 5: Quality of dialysis fluid for haemodialysis and related therapies (ISO 23500-5:2019) SFS-EN ISO 11663:en:2015 11.040.50 Radiografiset laitteet SFS-EN IEC 62464-1:2019:en, 2019-03-15 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters SFS-EN 62464-1:en:2007 11.040.55 Diagnostiset laitteet SFS-EN 60601-2-40:2019:en, 2019-01-25 Sähkökäyttöiset terveydenhuollon laitteet. Osa 2-40: Turvallisuuden ja olennaisen suorituskyvyn erityisvaatimukset elektromyografialaitteille ja herätepotentiaalilaitteille Medical electrical equipment - Part 2-40: Particular requirements for the basic safety and essential performance of electromyographs and evoked response equipment SFS-EN 60601-2-40:en:1998 SFS-EN ISO 80601-2-61:2019:en, 2019-02-08 Sähkökäyttöiset terveydenhuollon laitteet. Osa 2-61: Pulssioksimetrien yleistä turvallisuutta ja olennaista suorituskykyä koskevat vaatimukset Medical electrical equipment. Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2017, Corrected version 2018-02) SFS-EN ISO 80601-2-61:en:2011 11.040.70 Silmälääketieteelliset laitteet SFS-EN ISO 13666:2019:en, 2019-03-29 Silmälääketieteellinen optiikka. Piilolinssit. Sanasto Ophthalmic optics. Spectacle lenses. Vocabulary (ISO 13666:2019)
7 SFS-EN ISO 13666:en:2013 11.040.99 Muut terveydenhuollon laitteet SFS-EN 60601-2-40:2019:en, 2019-01-25 Sähkökäyttöiset terveydenhuollon laitteet. Osa 2-40: Turvallisuuden ja olennaisen suorituskyvyn erityisvaatimukset elektromyografialaitteille ja herätepotentiaalilaitteille Medical electrical equipment - Part 2-40: Particular requirements for the basic safety and essential performance of electromyographs and evoked response equipment SFS-EN 60601-2-40:en:1998 SFS-EN ISO 23907-1:2019:en, 2019-02-22 Terävien instrumenttien aiheuttamien tapaturmien ehkäiseminen. Vaatimukset ja testimenetelmät. Osa 1: Terävien instrumenttien kertakäyttöiset keräysastiat Sharps injury protection. Requirements and test methods. Part 1: Single-use sharps containers (ISO 23907-1:2019) SFS-EN ISO 23907:2013 SFS-EN ISO 23907:en:2013 11.080.10 Sterilointivälineet SFS-EN ISO 15883-4:2019:en, 2019-01-04 Pesu- ja desinfiointikoneet. Osa 4: Lämpöherkkien endoskooppien kemialliseen desinfiointiin tarkoitettujen pesu- ja desinfiointikoneiden vaatimukset ja testit Washer-disinfectors. Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes (ISO 15883-4:2018) SFS-EN ISO 15883-4:2009 SFS-EN ISO 15883-4:en:2009 11.080.30 Steriloidut pakkaukset SFS-EN 868-10:2019:en, 2019-01-04 Pakattuina steriloitujen terveydenhuollon laitteiden ja tarvikkeiden pakkaukset. Osa 10: Liimapinnalla päällystetyt polyolefiinimateriaalit. Vaatimukset ja testimenetelmät Packaging for terminally sterilized medical devices. Part 10: Adhesive coated nonwoven materials of polyolefines. Requirements and test methods SFS-EN 868-10:en:2009
8 SFS-EN 868-5:2019:en, 2019-01-04 Pakattuina steriloitujen terveydenhuollon laitteiden ja tarvikkeiden pakkaukset. Osa 5: Huokoisista materiaaleista ja muovikalvosta valmistetut suljettavat pussit ja rullat. Vaatimukset ja testimenetelmät Packaging for terminally sterilized medical devices. Part 5: Sealable pouches and reels of porous materials and plastic film construction. Requirements and test methods SFS-EN 868-5:2009 SFS-EN 868-5:en:2009 SFS-EN 868-8:2019:en, 2019-01-04 Pakattuina steriloitujen terveydenhuollon laitteiden ja tarvikkeiden pakkaukset. Osa 8: Standardin EN 285 mukaisissa höyrysterilointilaitteissa käytettävät kestokäyttöiset sterilointikontainerit. Vaatimukset ja testimenetelmät Packaging for terminally sterilized medical devices. Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285. Requirements and test methods SFS-EN 868-8:2009 SFS-EN 868-8:en:2009 SFS-EN 868-9:2019:en, 2019-01-04 Pakattuina steriloitujen terveydenhuollon laitteiden ja tarvikkeiden pakkaukset. Osa 9: Pinnoittamattomat polyolefiinimateriaalit. Vaatimukset ja testimenetelmät Packaging for terminally sterilized medical devices. Part 9: Uncoated nonwoven materials of polyolefines. Requirements and test methods SFS-EN 868-9:en:2009 11.100.10 In vitro -diagnostiset testit SFS-EN ISO 20166-1:2019:en, 2019-01-04 In vitro -diagnostiset molekyylitutkimukset. Formaliinifiksoidun ja parafeeniin valetun kudoksen (FFPE) valmisteluposessin määrittely. Osa 1: RNA:n eristys Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for formalin-fixed and paraffin-embedded (FFPE) tissue. Part 1: Isolated RNA (ISO 20166-1:2018) SFS-EN ISO 20166-2:2019:en, 2019-01-04 In vitro -diagnostiikkaan tarkoitetut molekyylibiologiset tutkimukset. Formaliinifiksoidun ja parafeeniin valetun kudoksen (FFPE) valmisteluposessin määrittely. Osa 2: Proteiinin eristys Molecular in vitro diagnostic examinations. Specifications for pre-examinations processes for formalin-fixed and paraffin-embedded (FFPE) tissue. Part 2: Isolated proteins (ISO 20166-2:2018) SFS-EN ISO 20166-3:2019:en, 2019-02-01 In vitro -diagnostiikkaan tarkoitetut molekyylibiologiset tutkimukset. Formaliinifiksoidun ja parafeeniin valetun kudoksen (FFPE) valmisteluposessin määrittely. Osa 3: DNA:n eristys
9 Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for formalin-fixed and paraffin-embedded (FFPE) tissue. Part 3: Isolated DNA (ISO 20166-3:2018) SFS-EN ISO 20184-1:2019:en, 2019-01-04 In vitro -diagnostiset molekyylitutkimukset. Jäädytetyn kudoksen valmisteluprosessin määrittely. Osa 1: RNA:n eristys Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for frozen tissue. Part 1: Isolated RNA (ISO 20184-1:2018) 11.100.99 Muut laboratoriolääketieteeseen liittyvät standardit SFS-EN ISO 15195:2019:en, 2019-02-15 Lääketieteelliset laboratoriot. Referenssimittauksia tekevien kalibrointilaboratorioiden pätevyysvaatimukset Laboratory medicine. Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018) SFS-EN ISO 15195:2004 SFS-EN ISO 15195:en:2004 11.180.01 Vammaisten apuvälineet, yleistä SFS-EN 17161:2019:en, 2019-03-15 Esteettömyys. Tuotteiden, esineiden ja palveluiden saavutettavuus esteettömyys-lähtöisen suunnittelun seurauksena. Käyttäjäkunnan laajentaminen Design for All. Accessibility following a Design for All approach in products, goods and services. Extending the range of users 13.020 Ympäristönsuojelu SFS-EN IEC 62474:2019:en, 2019-02-22 Material declaration for products of and for the electrotechnical industry SFS-EN 62474:en:2012 13.020.40 Ympäristön pilaantuminen ja suojelu SFS-EN ISO 14064-1:2019:en, 2019-02-15 Kasvihuonekaasut. Osa 1: Määrittelyt ja opastusta kasvihuonekaasujen päästöjen ja poistojen laskennasta ja raportoinnista organisaatiotasolla Greenhouse gases. Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2018)
10 SFS-EN ISO 14064-1:en:2012 13.030.01 Jätteet, yleistä SFS-EN 16167:2018 + AC:2019:en, 2019-02-08 Soil, treated biowaste and sludge. Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD) SFS-EN 16167:2018:en:2018 SFS-EN 16190:2019:en, 2019-01-04 Soil, treated biowaste and sludge. Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS) CEN/TS 16190:en:2012 13.030.20 Nestemäinen jäte. Liete SFS-EN 14701-4:2019:en, 2019-01-04 Characterization of sludges. Filtration properties. Part 4: Determination of the drainability of flocculated sludge SFS-EN 14701-4:en:2010 SFS-EN 14702-3:2019:en, 2019-03-01 Characterisation of sludges. Settling properties. Part 3: Determination of zone settling velocity (ZSV) SFS-EN 17183:2019:en, 2019-01-04 Characterization of sludge. Evaluation of sludge density 13.040.20 Ulkoilma SFS-EN 16402:2019:en, 2019-03-08 Paints and varnishes. Assessment of emissions of substances from coatings into indoor air. Sampling, conditioning and testing SFS-EN 16402:en:2013 13.060.10 Luonnon vesivarat SFS-EN 17136:2019:en, 2019-03-08
11 Water quality. Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters SFS-ISO 5667-4:2019, 2019-03-15 Veden laatu. Näytteenotto. Osa 4: Ohje näytteenottoon järvistä ja tekojärvistä Water quality -- Sampling -- Part 4: Guidance on sampling from lakes, natural and man-made Julkaisukieli: fi/en SFS-ISO 5667-4:2019:en, 2019-03-15 Veden laatu. Näytteenotto. Osa 4: Ohje näytteenottoon järvistä ja tekojärvistä Water quality -- Sampling -- Part 4: Guidance on sampling from lakes, natural and man-made 13.060.20 Juomavesi SFS-EN 12873-3:2019:en, 2019-02-22 Influence of materials on water intended for human consumption. Influence due to migration. Part 3: Test method for ion exchange and adsorbent resins SFS-EN 12873-3:en:2006 13.060.45 Vesianalyysi, yleistä SFS-ISO 5667-4:2019, 2019-03-15 Veden laatu. Näytteenotto. Osa 4: Ohje näytteenottoon järvistä ja tekojärvistä Water quality -- Sampling -- Part 4: Guidance on sampling from lakes, natural and man-made Julkaisukieli: fi/en SFS-ISO 5667-4:2019:en, 2019-03-15 Veden laatu. Näytteenotto. Osa 4: Ohje näytteenottoon järvistä ja tekojärvistä Water quality -- Sampling -- Part 4: Guidance on sampling from lakes, natural and man-made 13.060.60 Veden fysikaalisten ominaisuuksien tutkiminen SFS-EN ISO 7027-2:2019:en, 2019-03-01 Water quality. Determination of turbidity. Part 2: Semi-quantitative methods for the assessment of transparency of waters (ISO 7027-2:2019) SFS-EN ISO 7027:2000 SFS-EN ISO 7027:en:2000
12 13.060.70 Veden biologisten ominaisuuksien tutkiminen SFS-EN ISO 11348-1:2009/A1:2019:en, 2019-01-04 Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Part 1: Method using freshly prepared bacteria. Amendment 1 (ISO 11348-1:2007/Amd 1:2018) SFS-EN ISO 11348-2:2009/A1:2019:en, 2019-01-04 Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Part 2: Method using liquid-dried bacteria. Amendment 1 (ISO 11348-2:2007/Amd 1:2018) SFS-EN ISO 11348-3:2009/A1:2019:en, 2019-01-04 Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Part 3: Method using freeze-dried bacteria. Amendment 1 (ISO 11348-3:2007/Amd 1:2018) 13.080.01 Maaperän laatu ja maaperäoppi, yleistä SFS-EN ISO 16133:2019:en, 2019-01-04 Soil quality. Guidance on the establishment and maintenance of monitoring programmes (ISO 16133:2018) SFS-EN ISO 16133:en:2011 13.080.10 Maaperän kemialliset ominaisuudet SFS-EN 16167:2018 + AC:2019:en, 2019-02-08 Soil, treated biowaste and sludge. Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD) SFS-EN 16167:2018:en:2018 SFS-EN 16190:2019:en, 2019-01-04 Soil, treated biowaste and sludge. Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS) CEN/TS 16190:en:2012 13.080.20 Maaperän fysikaaliset ominaisuudet SFS-EN ISO 17892-10:2019:en, 2019-01-04
13 Geotechnical investigation and testing. Laboratory testing of soil. Part 10: Direct shear tests (ISO 17892-10:2018) CEN ISO/TS 17892-10:en:2004 CEN ISO/TS 17892-10:fi:2004 SFS-EN ISO 17892-11:2019:en, 2019-03-08 Geotechnical investigation and testing. Laboratory testing of soil. Part 11: Permeability tests (ISO 17892-11:2019) CEN ISO/TS 17892-11:en:2004 CEN ISO/TS 17892-11:fi:2004 13.080.30 Maaperän biologiset ominaisuudet SFS-EN ISO 23753-1:2019:en, 2019-03-29 Soil quality. Determination of dehydrogenases activity in soils. Part 1: Method using triphenyltetrazolium chloride (TTC) (ISO 23753-1:2019) SFS-EN ISO 23753-1:en:2011 SFS-EN ISO 23753-2:2019:en, 2019-03-29 Soil quality. Determination of dehydrogenases activity in soils. Part 2: Method using iodotetrazolium chloride (INT) (ISO 23753-2:2019) SFS-EN ISO 23753-2:en:2011 13.080.40 Maaperän hydrologiset ominaisuudet SFS-EN ISO 15175:2019:en, 2019-01-04 Soil quality. Characterization of contaminated soil related to groundwater protection (ISO 15175:2018) SFS-EN ISO 15175:en:2011 13.110 Koneturvallisuus SFS-EN IEC 60204-11:2019:en, 2019-02-08 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kv SFS-EN 60204-11:en:2001
14 SFS-EN IEC 61496-3:2019:en, 2019-03-01 Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for active optoelectronic protective devices responsive to diffuse Reflection (AOPDDR) CLC/TS 61496-3:en:2015 SFS-EN ISO 19353:2019:en, 2019-03-08 Koneturvallisuus. Palontorjunta ja palosuojelu Safety of machinery. Fire prevention and fire protection (ISO 19353:2019) SFS-EN ISO 19353:2016:2016 SFS-EN ISO 19353:en:2016 13.120 Kodin turvallisuus SFS-EN 60335-2-11:2010/A2:2019:en, 2019-01-04 Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers 13.160 Ihmiseen kohdistuva tärinä ja iskut SFS-EN ISO 10819:2013/A1:2019:en, 2019-02-22 Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand. Amendment 1 (ISO 10819:2013/Amd 1:2019) SFS-EN ISO 28927-4:2011/A1:2019:en, 2019-01-04 Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 4: Straight grinders. Amendment 1: Cupped wire brushes (ISO 28927-4:2010/Amd 1:2017) 13.180 Ergonomia SFS-EN 17161:2019:en, 2019-03-15 Esteettömyys. Tuotteiden, esineiden ja palveluiden saavutettavuus esteettömyys-lähtöisen suunnittelun seurauksena. Käyttäjäkunnan laajentaminen Design for All. Accessibility following a Design for All approach in products, goods and services. Extending the range of users 13.220.40 Aineiden ja tuotteiden syttyvyys ja palo-ominaisuudet SFS-EN 17084:2019:en, 2019-01-04 Kiskoliikenne. Kiskokaluston palontorjunta. Materiaalien ja komponenttien myrkyllisyystestit
15 Railway applications. Fire protection on railway vehicles. Toxicity test of materials and components 13.220.50 Rakennusmateriaalien ja -elementtien palonkesto SFS 7041:2019, 2019-01-18 Teräspalo-oviin kohdistuvat kansalliset vaatimukset ja suoritustasojen arviointi Characteristics and requirement levels of steel fire doors in different applications Julkaisukieli: fi SFS-EN 13501-1:2019:en, 2019-01-04 Fire classification of construction products and building elements. Part 1: Classification using data from reaction to fire tests SFS-EN 13501-1 + A1:2010 SFS-EN 13501-1 + A1:en:2010 SFS-EN 13501-6:2019:en, 2019-01-04 Fire classification of construction products and building elements. Part 6: Classification using data from reaction to fire tests on power, control and communication cables SFS-EN 13501-6:en:2014 SFS-EN 14187-7:2019:en, 2019-03-29 Kylmänä levitettävät saumausmassat. Testausmenetelmät. Osa 7: Liekinkestävyyden määrittäminen Cold applied joint sealants. Test methods. Part 7: Determination of the resistance to flame SFS-EN 14187-7:en:2004 SFS-EN 15269-11:2018 + AC:2019:en, 2019-03-15 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware. Part 11: Fire resistance for operable fabric curtains SFS-EN 15269-11:2018:en:2018 13.240 Ylipaineelta suojautuminen SFS-EN ISO 4126-2:2019, 2019-03-22 Ylipaineen varolaitteet. Osa 2: Murtolevyt ja murtokalvot Safety devices for protection against excessive pressure. Part 2: Bursting disc safety devices (ISO 4126-2:2018) Julkaisukieli: fi/en
16 SFS-EN ISO 4126-2:2003 SFS-EN ISO 4126-2:en:2003 SFS-EN ISO 4126-2:2019:en, 2019-03-22 Ylipaineen varolaitteet. Osa 2: Murtolevyt ja murtokalvot Safety devices for protection against excessive pressure. Part 2: Bursting disc safety devices (ISO 4126-2:2018) SFS-EN ISO 4126-2:2003 SFS-EN ISO 4126-2:en:2003 13.310 Rikosten torjunta SFS-EN 1300:2019:en, 2019-01-04 Secure storage units. Classification for high security locks according to their resistance to unauthorized opening SFS-EN 1300:en:2014 13.320 Hälytys- ja varoitusjärjestelmät SFS-EN 50436-4:2019:en, 2019-02-22 Alcohol interlocks - Test methods and performance requirements - Part 4: Connection and digital interface between the alcohol interlock and the vehicle SFS-EN 81-28:2018 + AC:2019, 2019-02-01 Hissien suunnittelua ja rakentamista koskevat turvallisuusohjeet. Henkilöiden ja tavaroiden kuljetukseen tarkoitetut hissit. Osa 28: Henkilö- ja tavarahenkilöhissien kaukohälytys Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Part 28: Remote alarm on passenger and goods passenger lifts Julkaisukieli: fi/en SFS-EN 81-28:2018:2018 SFS-EN 81-28:2018:en:2018 SFS-EN 81-28:2018 + AC:2019:en, 2019-02-01 Hissien suunnittelua ja rakentamista koskevat turvallisuusohjeet. Henkilöiden ja tavaroiden kuljetukseen tarkoitetut hissit. Osa 28: Henkilö- ja tavarahenkilöhissien kaukohälytys Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Part 28: Remote alarm on passenger and goods passenger lifts SFS-EN 81-28:2018:2018 SFS-EN 81-28:2018:en:2018
17 13.340.01 Henkilönsuojaimet, yleistä SFS-EN 16523-2:2015 + A1:2019:en, 2019-01-04 Determination of material resistance to permeation by chemicals. Part 2: Permeation by potentially hazardous gaseous chemicals under conditions of continuous contact SFS-EN 16523-2:en:2015 13.340.10 Suojavaatetus SFS-EN 1621-3:2019:en, 2019-01-04 Moottoripyöräilijöiden suojavaatetus mekaanista iskua vastaan. Osa 3: Moottoripyöräilijöiden rintakehän suojaimet. Vaatimukset ja testausmenetelmät Motorcyclists' protective clothing against mechanical impact Part 3: Motorcyclists' chest protectors. Requirements and test methods SFS-EN 343:2019:en, 2019-03-29 Suojavaatetus. Suojaus sateelta Protective clothing. Protection against rain SFS-EN 343 + A1:2008 SFS-EN 343 + A1/AC:en:2009 SFS-EN 343 + A1:en:2008 13.340.30 Hengityksensuojaimet SFS-EN 148-1:2019:en, 2019-01-04 Respiratory protective devices. Threads for facepieces. Part 1: Standard thread connection SFS-EN 148-1:en:1999 13.340.40 Käsien ja käsivarsien suojaus SFS-EN ISO 10819:2013/A1:2019:en, 2019-02-22 Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand. Amendment 1 (ISO 10819:2013/Amd 1:2019) 13.340.99 Muut henkilönsuojaimet SFS-EN 13374:2013 + A1:2019:en, 2019-01-04 Temporary edge protection systems. Product specification. Test methods
18 SFS-EN 13374:en:2013 17.040.10 Toleranssit ja sovitteet SFS-EN ISO 14405-2:2019:en, 2019-02-01 Geometrical product specifications (GPS). Dimensional tolerancing. Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018) SFS-EN ISO 14405-2:en:2012 17.040.30 Mittauslaitteet SFS-EN ISO 14978:2019:en, 2019-01-04 Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment (ISO 14978:2018) SFS-EN ISO 14978/AC:en:2008 SFS-EN ISO 14978:en:2007 17.140.20 Koneiden ja laitteiden aiheuttama melu SFS-EN ISO 17201-1:2019:en, 2019-01-04 Acoustics. Noise from shooting ranges. Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2018) SFS-EN ISO 17201-1/AC:en:2009 SFS-EN ISO 17201-1:en:2006 SFS-EN ISO 17201-3:2019:en, 2019-03-08 Acoustics. Noise from shooting ranges. Part 3: Sound propagation calculations (ISO 17201-3:2019) SFS-EN ISO 17201-3:en:2010 17.140.30 Kulkuneuvojen aiheuttama melu SFS-EN ISO 13473-1:2019:en, 2019-03-22 Characterization of pavement texture by use of surface profiles. Part 1: Determination of mean profile depth (ISO 13473-1:2019) SFS-EN ISO 13473-1:en:2004
19 17.160 Värähtelyjen, iskujen ja tärinän mittaus SFS-ISO 17359:2019:en, 2019-03-29 Koneiden kunnonvalvonta ja diagnostiikka. Yleiset periaatteet Condition monitoring and diagnostics of machines -- General guidelines SFS-ISO 17359:2011 SFS-ISO 17359:en:2011 SFS-ISO 18436-1:2019:en, 2019-01-18 Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 1: Requirements for assessment bodies and the assessment process SFS-ISO 18436-1/AC:en:2011 SFS-ISO 18436-1:en:2011 17.200.10 Lämpö. Kalorimetria SFS-EN 1434-5:2015 + A1:2019:en, 2019-02-22 Thermal energy meters. Part 5: Initial verification tests SFS-EN 1434-5:en:2015 SFS-EN 1434-6:2015 + A1:2019:en, 2019-02-22 Thermal energy meters. Part 6: Installation, commissioning, operational monitoring and maintenance SFS-EN 1434-6:en:2015 17.220.20 Sähköisten ja magneettisten suureiden mittaus SFS-EN IEC 62056-8-4:2019:en, 2019-03-15 Electricity metering data exchange - the DLMS/COSEM suite - Part 8-4: Communication profiles for narrowband OFDM PLC PRIME neighbourhood networks 19.080 Sähköinen ja elektroninen testaus SFS-EN 61010-1:2011/A1:2019, 2019-03-08 Sähköisten mittaus-, ohjaus- ja laboratoriolaitteiden turvallisuus. Osa 1: Yleiset vaatimukset Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements Julkaisukieli: fi/en
20 SFS-EN 61010-1:2011/A1:2019:en, 2019-03-08 Sähköisten mittaus-, ohjaus- ja laboratoriolaitteiden turvallisuus. Osa 1: Yleiset vaatimukset Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements SFS-EN IEC 60746-4:2019:en, 2019-03-15 Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane-covered amperometric sensors 23.020.30 Painelaitteet SFS-EN 13445-3:2014/A6:2019:en, 2019-03-29 Unfired pressure vessels. Part 3: Design 23.020.35 Kaasupullot SFS-EN 12817:2019:en, 2019-03-22 LPG Equipment and accessories. Inspection and requalification of LPG pressure vessels up to and including 13 m³ SFS-EN 12817:en:2010 SFS-EN 12819:2019:en, 2019-03-22 LPG equipment and accessories. Inspection and requalification of LPG pressure vessels greater than 13 m³ SFS-EN 12819:en:2010 23.040.01 Putkistot ja niiden osat, yleistä SFS-EN 13480-5:2017/A1:2019:en, 2019-03-29 Metallic industrial piping. Part 5: Inspection and testing 23.040.10 Rauta- ja teräsputket SFS-EN 15655-1:2019:en, 2019-01-04 Ductile iron pipes, fittings and accessories. Requirements and test methods for organic linings of ductile iron pipes and fittings. Part 1: Polyurethane lining of pipes and fittings SFS-EN 15655:en:2009
21 SFS-EN ISO 10893-6:2019:en, 2019-03-22 Teräsputkien rikkomaton aineenkoetus. Osa 6: Hitsattujen teräsputkien hitsien radiografinen tarkastus virheiden havaitsemiseksi Non-destructive testing of steel tubes. Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019) SFS-EN ISO 10893-6:en:2011 SFS-EN ISO 10893-7:2019:en, 2019-03-22 Teräsputkien rikkomaton aineenkoetus. Osa 7: Hitsattujen teräsputkien hitsien digitaalinen radiografinen tarkastus virheiden havaitsemiseksi Non-destructive testing of steel tubes. Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019) SFS-EN ISO 10893-7:en:2011 23.040.20 Muoviputket SFS-EN ISO 11296-7:2019:en, 2019-02-22 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019) SFS-EN ISO 11296-7:en:2013 23.040.40 Metalliset putkiyhteet SFS-EN 15655-1:2019:en, 2019-01-04 Ductile iron pipes, fittings and accessories. Requirements and test methods for organic linings of ductile iron pipes and fittings. Part 1: Polyurethane lining of pipes and fittings SFS-EN 15655:en:2009 23.040.45 Muoviset putkiyhteet SFS-EN ISO 11296-7:2019:en, 2019-02-22 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019) SFS-EN ISO 11296-7:en:2013 23.040.70 Letkut ja letkukokoonpanot SFS-EN 13766:2019:en, 2019-01-04
22 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification SFS-EN 13766:en:2010 SFS-EN 1762:2019:en, 2019-01-04 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification SFS-EN 1762:2017:en:2017 23.080 Pumput SFS-EN ISO 14414:2019:en, 2019-03-08 Pump system energy assessment (ISO/ASME 14414:2019) SFS-EN ISO 14414/A1:en:2016 SFS-EN ISO 14414:en:2015 23.100.10 Pumput ja moottorit SFS-EN IEC 62364:2019:en, 2019-03-29 Hydraulic machines - Guidelines for dealing with hydro-abrasive erosion in kaplan, francis and pelton turbines SFS-EN 62364:en:2013 23.100.40 Putkisto ja liittimet SFS-EN 856:2015 + AC:2019:en, 2019-03-15 Rubber hoses and hose assemblies. Rubber-covered spiral wire reinforced hydraulic type. Specification SFS-EN 856:en:2015 23.120 Tuulettimet. Puhaltimet. Ilmastointilaitteet SFS-EN IEC 60665:2019:en, 2019-01-25 A.C. ventilating fans and regulators for household and similar purposes - Methods for measuring performance 25.040.40 Teollisuusprosessien mittaus ja ohjaus SFS-EN IEC 61784-5-12:2019:en, 2019-01-04
23 Industrial communication networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 SFS-EN 61784-5-12/A1:en:2015 SFS-EN 61784-5-12:en:2012 SFS-EN IEC 61784-5-18:2019:en, 2019-01-04 Industrial communication networks - Profiles - Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18 SFS-EN 61784-5-18:en:2014 SFS-EN IEC 61784-5-2:2019:en, 2019-01-04 Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 SFS-EN 61784-5-2:en:2014 SFS-EN IEC 61784-5-20:2019:en, 2019-01-04 Industrial communication networks - Profiles - Part 5-20: Installation of fieldbuses - Installation profiles for CPF 20 SFS-EN IEC 61784-5-21:2019:en, 2019-01-04 Industrial communication networks - Profiles - Part 5-21: Installation of fieldbuses - Installation profiles for CPF 21 SFS-EN IEC 61784-5-6:2019:en, 2019-01-04 Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 SFS-EN 61784-5-6:en:2014 SFS-EN IEC 61784-5-8:2019:en, 2019-01-04 Industrial communication networks - Profiles - Part 5-8: Installation of fieldbuses - Installation profiles for CPF 8 SFS-EN 61784-5-8:en:2014 25.140.10 Paineilmatyökalut SFS-EN ISO 28927-4:2011/A1:2019:en, 2019-01-04
24 Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 4: Straight grinders. Amendment 1: Cupped wire brushes (ISO 28927-4:2010/Amd 1:2017) 25.160.10 Hitsausprosessit SFS-EN ISO 17677-1:2019:en, 2019-03-29 Resistance welding. Vocabulary. Part 1: Spot, projection and seam welding (ISO 17677-1:2019) SFS-EN ISO 17677-1:en:2009 25.160.40 Hitsausliitokset ja hitsit SFS-EN 14728:2019:en, 2019-03-01 Imperfections in thermoplastic welds. Classification SFS-EN 14728:en:2005 SFS-EN ISO 13588:2019:en, 2019-03-15 Hitsien rikkomaton aineenkoetus. Ultraäänitarkastus. Automaattinen vaiheistettu ultraäänitarkastus Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology (ISO 13588:2019) SFS-EN ISO 13588:2013 SFS-EN ISO 13588:en:2013 SFS-EN ISO 20601:2019:en, 2019-01-04 Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology for thinwalled steel components (ISO 20601:2018) SFS-EN ISO 5178:2019, 2019-03-08 Hitsien rikkova aineenkoetus metalleille. Hitsiaineen pitkittäinen vetokoe sulahitsausliitoksissa Destructive tests on welds in metallic materials. Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2019) Julkaisukieli: fi/en SFS-EN ISO 5178:2011 SFS-EN ISO 5178:en:2011 SFS-EN ISO 5178:2019:en, 2019-03-08 Hitsien rikkova aineenkoetus metalleille. Hitsiaineen pitkittäinen vetokoe sulahitsausliitoksissa Destructive tests on welds in metallic materials. Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2019)
25 SFS-EN ISO 5178:2011 SFS-EN ISO 5178:en:2011 25.220.20 Pintakäsittely SFS-EN 17120:2019:en, 2019-03-01 Photocatalysis. Water purification. Performance of photocatalytic materials by measurement of phenol degradation SFS-EN ISO 10111:2019:en, 2019-02-15 Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods (ISO 10111:2019) SFS-EN ISO 10111:en:2002 SFS-EN ISO 2063-1:2019:en, 2019-03-29 Terminen ruiskutus. Sinkki, alumiini ja niiden seokset. Osa 1: Korroosiosuojauksen suunnittelu ja laatuvaatimukset Thermal spraying. Zinc, aluminium and and their alloys. Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019) SFS-EN ISO 2063-1:2017:en:2017 SFS-EN ISO 3211:2019:en, 2019-01-04 Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018) SFS-EN ISO 3211:en:2010 25.220.40 Metalliset pinnoitteet SFS-EN ISO 10111:2019:en, 2019-02-15 Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods (ISO 10111:2019) SFS-EN ISO 10111:en:2002 SFS-EN ISO 2063-1:2019:en, 2019-03-29 Terminen ruiskutus. Sinkki, alumiini ja niiden seokset. Osa 1: Korroosiosuojauksen suunnittelu ja laatuvaatimukset
26 Thermal spraying. Zinc, aluminium and and their alloys. Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019) SFS-EN ISO 2063-1:2017:en:2017 27.060.30 Kattilat ja lämmönvaihtimet SFS-EN ISO 16812:2019:en, 2019-03-15 Petroleum, petrochemical and natural gas industries. Shell-and-tube heat exchangers (ISO 16812:2019) SFS-EN ISO 16812:en:2007 27.140 Vesivoimatekniikka SFS-EN IEC 62364:2019:en, 2019-03-29 Hydraulic machines - Guidelines for dealing with hydro-abrasive erosion in kaplan, francis and pelton turbines SFS-EN 62364:en:2013 29.020 Sähkötekniikka, yleistä SFS 5825:2019, 2019-02-15 Sähkölaitteiston varmennustarkastus Verification inspection of electrical installation Julkaisukieli: fi SFS 5825:2006 SFS-EN IEC 60204-11:2019:en, 2019-02-08 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kv SFS-EN 60204-11:en:2001 29.060.20 Kaapelit SFS-EN 13501-6:2019:en, 2019-01-04 Fire classification of construction products and building elements. Part 6: Classification using data from reaction to fire tests on power, control and communication cables SFS-EN 13501-6:en:2014
27 29.080.20 Läpivientieristimet SFS-EN 50673:2019:en, 2019-03-29 Plug-in type bushings for 72,5 kv with 630 A and 1 250 A for electrical equipment 29.100 Sähkölaitteiden komponentit SFS-EN IEC 62474:2019:en, 2019-02-22 Material declaration for products of and for the electrotechnical industry SFS-EN 62474:en:2012 29.120 Sähkötarvikkeet SFS 5490:2019, 2019-01-18 Pienjännitevarokkeet. Ammattikäyttöön tarkoitettujen varokkeiden lisävaatimukset (pääasiassa teollisuuskäytön varokkeet) kahvavarokkeet Low-voltage fuses. Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Fuses with fuse-links with blade contacts Julkaisukieli: fi SFS 5490:2009 SFS 5855:2019, 2019-01-18 Pienjännitevarokkeet. Maallikoiden käyttöön tarkoitettujen varokkeiden lisävaatimukset (pääasiassa kotitalouksiin ja vastaaviin käyttöihin tarkoitetut varokkeet). D-tyypin varokkeet Low-voltage fuses. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications). D-type fuses Julkaisukieli: fi SFS 5855:2009 29.120.01 Sähkötarvikkeet, yleistä SFS-EN IEC 60730-2-14:2019:en, 2019-03-08 Automatic electrical controls - Part 2-14: Particular requirements for electric actuators SFS-EN 60730-2-14/A1:en:2002 SFS-EN 60730-2-14/A11:en:2005 SFS-EN 60730-2-14/A2:en:2009 SFS-EN 60730-2-14:en:1999
28 29.120.40 Kytkimet SFS-EN IEC 61058-2-6:2019:en, 2019-01-25 Switches for appliances - Part 2-6: Particular requirements for switches used in electric motor-operated handheld tools, transportable tools and lawn and garden machinery SFS-EN 61058-2-6:2016:en:2016 29.120.50 Varokkeet ja muut ylivirtasuojalaitteet SFS-EN 60898-1:2019:en, 2019-02-01 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation SFS-EN 60898-1/A1:en:2005 SFS-EN 60898-1/A11:en:2006 SFS-EN 60898-1/A12:en:2009 SFS-EN 60898-1/A13:en:2012 SFS-EN 60898-1/IS1:en:2015 SFS-EN 60898-1/IS2:en:2015 SFS-EN 60898-1/IS3:en:2015 SFS-EN 60898-1/IS4:en:2015 SFS-EN 60898-1:en:2003 29.130 Kytkin- ja ohjauslaitteet SFS 5490:2019, 2019-01-18 Pienjännitevarokkeet. Ammattikäyttöön tarkoitettujen varokkeiden lisävaatimukset (pääasiassa teollisuuskäytön varokkeet) kahvavarokkeet Low-voltage fuses. Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Fuses with fuse-links with blade contacts Julkaisukieli: fi SFS 5490:2009 SFS 5855:2019, 2019-01-18 Pienjännitevarokkeet. Maallikoiden käyttöön tarkoitettujen varokkeiden lisävaatimukset (pääasiassa kotitalouksiin ja vastaaviin käyttöihin tarkoitetut varokkeet). D-tyypin varokkeet Low-voltage fuses. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications). D-type fuses Julkaisukieli: fi SFS 5855:2009
29 29.130.20 Pienjännitekytkinlaitteet SFS-EN IEC 60947-7-4:2019:en, 2019-03-22 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors SFS-EN 60947-7-4:en:2014 29.140.30 Loistelamput. Purkauslamput SFS-EN 60188:2001/A11:2019:en, 2019-02-22 High-pressure mercury vapour lamps - Performance specifications SFS-EN 60662:2012/A11:2019:en, 2019-03-01 High-pressure sodium vapour lamps - Performance specifications SFS-EN 62560:2013/A11:2019:en, 2019-03-15 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications 29.140.50 Valaisimien asennusjärjestelmät SFS-EN IEC 62386-220:2019:en, 2019-03-29 Digital addressable lighting interface - Part 220: Particular requirements for control gear - Centrally supplied emergency operation (device type 19) 29.140.99 Muut lamppuihin liittyvät standardit SFS-EN IEC 62386-220:2019:en, 2019-03-29 Digital addressable lighting interface - Part 220: Particular requirements for control gear - Centrally supplied emergency operation (device type 19) 29.160.20 Generaattorit SFS-EN 50549-1:2019:en, 2019-02-15 Requirements for generating plants to be connected in parallel with distribution networks - Part 1: Connection to a LV distribution network - Generating plants up to and including Type B CLC/TS 50549-1:en:2015 SFS-EN 50438:2015 SFS-EN 50438:en:2015
30 SFS-EN 50549-2:2019:en, 2019-02-15 Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network - Generating plants up to and including Type B CLC/TS 50549-2:en:2015 29.220.20 Happoakut SFS-EN IEC 62660-1:2019:en, 2019-03-01 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing SFS-EN 62660-1:en:2011 SFS-EN IEC 62660-2:2019:en, 2019-03-01 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing SFS-EN 62660-2:en:2011 29.240.20 Sähkönjakelujohdot SFS-EN 50341-2-24:2019:en, 2019-03-29 Overhead electrical lines exceeding AC 1 kv - Part 2-24: National Normative Aspects (NNA) for Romania (based on EN 50341-1:2012) 31.020 Elektroniikan komponentit, yleistä SFS-EN IEC 60286-3:2019:en, 2019-03-22 Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes SFS-EN 60286-3:en:2013 SFS-EN 60286-3/AC:en:2015 SFS-EN IEC 62474:2019:en, 2019-02-22 Material declaration for products of and for the electrotechnical industry SFS-EN 62474:en:2012
31 31.200 Mikropiirit. Mikroelektroniikka SFS-EN IEC 61967-1:2019:en, 2019-03-01 Integrated circuits - Measurement of electromagnetic emissions - Part 1: General conditions and definitions SFS-EN 61967-1:en:2002 31.220.01 Sähkömekaaniset komponentit, yleistä SFS-EN IEC 60512-23-3:2019:en, 2019-03-15 Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method SFS-EN 60512-23-3:en:2001 31.220.10 Pistokytkimet. Koskettimet SFS-EN 60603-7:2011/A2:2109:en, 2019-03-22 Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors SFS-EN 61076-1:2007/A1:2019:en, 2019-03-29 Connectors for electronic equipment - Product requirements - Part 1: Generic specification 31.220.20 Kytkimet SFS-EN IEC 61020-1:2019:en, 2019-03-29 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification SFS-EN 61020-1:en:2010 31.240 Elektroniikkalaitteiden mekaaniset rakenteet SFS-EN IEC 60286-3:2019:en, 2019-03-22 Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes SFS-EN 60286-3:en:2013 SFS-EN 60286-3/AC:en:2015
32 31.260 Optoelektroniikka. Laserlaitteet SFS-EN IEC 61496-3:2019:en, 2019-03-01 Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for active optoelectronic protective devices responsive to diffuse Reflection (AOPDDR) CLC/TS 61496-3:en:2015 33.020 Tietoliikenne, yleistä SFS-EN 300132-1 V2.1.1:2019, 2019-03-22 Environmental Engineering (EE). Power supply interface at the input to Information and Communication Technology (ICT) equipment. Part 1: Alternating Current (AC) Julkaisukieli: Ei SFS:n julkaisua 33.040.01 Televerkot, yleistä SFS-EN 319531 V1.1.1:2019, 2019-02-08 Electronic Signatures and Infrastructures (ESI). Policy and security requirements for Registered Electronic Mail Service Providers Julkaisukieli: Ei SFS:n julkaisua 33.050.01 Telepäätelaitteet, yleistä SFS-EN 300132-1 V2.1.1:2019, 2019-03-22 Environmental Engineering (EE). Power supply interface at the input to Information and Communication Technology (ICT) equipment. Part 1: Alternating Current (AC) Julkaisukieli: Ei SFS:n julkaisua SFS-EN 303470 V1.1.1:2019, 2019-03-22 Environmental Engineering (EE). Energy Efficiency measurement methodology and metrics for servers Julkaisukieli: Ei SFS:n julkaisua 33.060.20 Radiovastaanottimet ja -lähettimet SFS-EN 303098 V2.2.1:2019, 2019-02-22 Maritime low power personal locating devices employing AIS. Harmonised Standard for access to radio spectrum Julkaisukieli: Ei SFS:n julkaisua 33.100.10 Häiriönpäästö SFS-EN 303098 V2.2.1:2019, 2019-02-22 Maritime low power personal locating devices employing AIS. Harmonised Standard for access to radio spectrum Julkaisukieli: Ei SFS:n julkaisua
33 SFS-EN IEC 55016-1-4:2019:en, 2019-03-29 Radiohäiriöiden ja häiriönsiedon mittauslaitteet ja menetelmät. Osa 1-4: Radiohäiriöiden ja häiriönsiedon mittauslaitteet. Antennit ja mittapaikat radiohäiriöiden mittaamiseen Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements SFS-EN 55016-1-4/A1:en:2013 SFS-EN 55016-1-4:2011/A2:2017:en:2017 SFS-EN 55016-1-4:en:2011 SFS-EN IEC 61000-3-2:2019:en, 2019-03-15 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase) SFS-EN 61000-3-2:en:2014 33.100.20 Häiriönsieto SFS-EN IEC 55016-1-4:2019:en, 2019-03-29 Radiohäiriöiden ja häiriönsiedon mittauslaitteet ja menetelmät. Osa 1-4: Radiohäiriöiden ja häiriönsiedon mittauslaitteet. Antennit ja mittapaikat radiohäiriöiden mittaamiseen Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements SFS-EN 55016-1-4/A1:en:2013 SFS-EN 55016-1-4:2011/A2:2017:en:2017 SFS-EN 55016-1-4:en:2011 SFS-EN IEC 61000-6-1:2019:en, 2019-03-08 Sähkömagneettinen yhteensopivuus (EMC). Osa 6-1: Yleiset standardit. Häiriönsieto kotitalous-, toimisto- ja kevyen teollisuuden ympäristöissä Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments SFS-EN 61000-6-1:en:2007 SFS-EN IEC 61000-6-2:2019:en, 2019-03-08 Sähkömagneettinen yhteensopivuus (EMC). Osa 6-2: Yleiset standardit. Häiriönsieto teollisuusympäristöissä Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
34 SFS-EN 61000-6-2:en:2006 33.160 Audio-, video- ja audiovisuaalinen tekniikka SFS-EN IEC 63033-2:2019:en, 2019-02-15 Car multimedia systems and equipment - Drive monitoring system Part 2: Recording methods of the drive monitoring system 33.160.01 Audio- ja videojärjestelmät ja audiovisuaaliset järjestelmät, yleistä SFS-EN IEC 60268-21:2019:en, 2019-01-04 Äänilaitteet. Kaiuttimet. Akustiset mittaukset Sound system equipment - Part 21: Acoustical (output-based) measurements 33.160.10 Vahvistimet SFS-EN IEC 62087-7:2019:en, 2019-03-01 Audio-, video- ja niihin liittyvät laitteet - Tehonkulutuksen mittausmenetelmät - Osa 7: Tietokonenäytöt Audio, video, and related equipment - Methods of measurement for power consumption Part 7: Computer monitors 33.180.10 Kuidut ja kaapelit SFS-EN IEC 60793-1-32:2019:en, 2019-01-04 Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability SFS-EN 60793-1-32:en:2011 SFS-EN IEC 60793-2-50:2019:en, 2019-03-15 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres SFS-EN 60793-2-50:en:2016 33.180.20 Valokuitujen liitäntälaitteet SFS-EN IEC 60869-1:2019:en, 2019-01-04 Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification SFS-EN 60869-1:en:2013