T 15/1 HEPA Tehokas ja hyvinvarusteltu pölynimuri laitossiivouskäyttöön. 1 HEPA-suodatin (EN 1882:1998) Imrissa on HEPA -suodatin (EN 1822:1998) mikä takaa puhtaan poistoilman ja on ihanteellinen käytettäväksi esim. päiväkodeissa. 2 Highflex-virtajohto Highflex -virtajohto on kestävä, joustava eikä menee solmuun
TEKNISET TIEDOT JA LAITE. T 15/1 HEPA Tekniset tiedot Tuotenumero HEPA-suodatin (EN 1882:1998) Highflex-virtajohto EAN koodi 4039784723603 Ilman läpivirtaus l/s 53 Alipaine mbar / kpa 240 / 24 Säiliötilavuus l 15 Maks. ottoteho W 800 Varusteiden halkaisija ID 51/61 35 Johdon pituus m 15 Äänenvoimakkuus db(a) 62 Äänitehotaso db(a) 76 Paino kg 8 Mitat (p x l x k) mm 435 315 400 Energialuokka (Asteikko A+++ - D) B Laite Imuletku m 2,5 Teleskooppimainen imuputki Standardi Pölypussi Fleece Vaihdettava lattiasuutin mm 285 Säiliön materiaali Muovi Lattiasuutin Rakosuutin Patterisuulake Toimituksen mukana.
1 2 3 4 5 6 7 8 10 12 13 16 17 18 19 Tuotenumero Määrä Pituus Leveys Kuvaus Poistoilman suodatin Moottorinsuojasuodatin 1 6.414-611.0 5 kpl Poistoilmansuodatin T 12/1 3 kpl. 2 6.414-802.0 3 kpl Standard exhaust filter and diffusor for reducing filtered air. Made of foam. Suodatinkori Suodatinkori T 15/1,T 12/1, T 17/1 3 5.731-640.0 1 kpl Main filter basket for T 15/1, T 12/1 and T 17/1 can be used as a main filter with or without filter bag. Nylon-plastic frame, washable up to 40 C. Hienopölysuodatin 4 4.731-011.0 1 kpl Plastic frames with reinforced fleece material, washably to 40 C. HEPA-suodatin, pölyluokka H Filter HEPA 5 6.414-801.0 1 kpl HEPA filter cassette (paper/plastic) - H 12 - increases filter capacity and improves exhaust air. Optional (with Professional version as standard) filter instead of exhaust filter cas- sette. Fleece-pölypussit (3-kerroksiset) Fleece pölypussit T 15/1, T 17/1, 10 kpl Fleece pölypussit T 15/1, T 17/1, 200 kpl Taivutettu imutanko, muovia Elbow electrically conducting packaged N Rakosuulakkeet 6 6.907-017.0 10 kpl Extremely tear-resistant, 3-ply fleece filter bags, dust class M. Fleece filter bags have 2 to 3 times the capacity of conventional paper filter bags. Standard for T 15/1 and T 17/1. 7 6.907-018.0 200 kpl 8 2.889-148.0 1 kpl ID 35 Crevice nozzle packaged NW35 9 2.889-130.0 1 kpl ID 35 210 mm Lattiasuulakkeet, kuivaimurointi Floor tool packaged NW35 10 2.889-129.0 1 kpl ID 35 295 mm Combination nozzle packaged 11 6.907-410.0 1 kpl ID 32 270 mm basalt grey Yhdistelmäsuulake (kuiva) ID 32, 12 6.906-107.0 1 kpl ID 32 360 mm Plastic combination floor tool for parquet (DN 32) with 360 mm brush strips and two rollers, suitable for all industrial T vacuum cleaners. Combination floor tool without changeover function. 360 mm Floor tool packaged D300 NW32 13 6.907-486.0 1 kpl ID 32 300 mm Parquet nozzle packaged D360 14 2.889-196.0 ID 35 360 mm NW35 Parquet nozzle packaged D300 15 2.889-197.0 ID 35 300 mm NW35 Combination nozzle packaged RD 16 6.907-468.0 1 kpl ID 32 290 mm 296 NW32 Combination nozzle packaged RD 17 6.907-467.0 1 kpl ID 32 270 mm 270 NW32 Imutangot metallia Telescopic tube packaged NW35 18 2.862-008.0 1 kpl ID 35 0,61 m IMUPUTKI DN32 19 6.906-618.0 1 kpl ID 32 0,5 m Metal suction tube (DN 32, length 0.5 m) with black plastic coating, suitable as an extension, e.g. vacuuming ceilings. TELESKOOPPIPUTKI /T 201 20 6.903-524.0 1 kpl ID 32 Chromium-plated metal telescopic tube (DN 32, length: 0.61-1 m), suitable as an extension, e.g. vacuuming ceilings. Imutanko DN 32 21 6.903-850.0 1 kpl ID 32 0,5 m Metal Toimituksen mukana. Saatavilla olevat varusteet.
22 24 25 26 27 28 30 31 32 33 34 35 36 37 38 39 40 Tuotenumero Määrä Pituus Leveys Kuvaus Imuletkut täydellinen (Clip-system) Hose packaged NW35 2.5m 22 2.889-133.0 1 kpl ID 35 2,5 m 23 4.440-982.0 1 kpl ID 32 2,5 m Paperinen pölypussi (kaksinkertainen) Paperinen pölypussi T 15/1, T 24 6.907-016.0 200 kpl 17/1, 10 kpl 25 6.907-019.0 10 kpl 10 paper filter bags (BIA-C dust class M), suitable for industrial dry vacuum cleaners (e.g. T 15/1 and T 17/1). Kankainen pölypussi Filter bag cloth 26 6.904-316.0 1 kpl Cotton filter bags, washable up to 40 C, suitable for T7/1, T 10/1 and T 12/1 models. Inaktiv Taivutettu tanko 32, muovi, sähköä johtava 27 4.408-052.0 1 kpl ID 32 Electrically conductive plastic bend (DN 32) with C-32 clip system, reduces static buildup. Optional for BV 111, T 7/1, T 191, T 10/1, T 12/1, T 201/T201 + ESB 28. Yleisharjat Yleisharjasuulake ID 32 28 6.906-122.0 1 kpl ID 32 120 mm All-purpose plastic brush Bristles: 120 x 45 mm. For all T and BV types. Moottoroidut harjasuulakkeet Harjapää ESB 34-230 V 29 2.642-442.0 1 kpl ID 32 340 mm Harjapää ESB 28 30 2.641-815.0 1 kpl ID 32 280 mm Electric brush with suction hose, power cord and telescopic suction tube. For better dirt pick up from textiles. Also suitable for flexible and hard surfaces. For T 201 and T 12/1. Harjasuulakkeet pattereille PATTERISUUTIN 31 6.903-034.0 1 kpl ID 35 Radiator brush is suitable for crevice tool 6.900-385.0 or 6.905-240.0. Patteriharja 32 6.903-404.0 1 kpl ID 32 Radiator brush is suitable for crevice tool 6.903-403.0 Verhoilusuulakkeet KALUSTESUUTIN /T 201 33 6.903-402.0 1 kpl ID 32 120 mm Plastic upholstery tool (DN 32) with thread catcher, standard for T 201, T 201 + ESB 28. Optional for T 7/1, T 191, T 10/1. Turbosuulakkeet TURBOSUUTIN/HUONEKALU 34 2.860-113.0 1 kpl ID 32 160 mm Plastic turbo upholstery nozzle (DN 35/32, 160 mm) with reduction sleeve. TURBOSUUTIN/LATTIA 35 2.860-114.0 1 kpl ID 32 270 mm Plastic turbo floor nozzle (DN 35/32, 270 mm) with reduction sleeve. Korjaussarjat Korjaussetti 36 2.639-739.0 1 kpl ID 32 Repair set (C32) includes threaded hose adapters for industrial T vacuum cleaners with clip system. Imuletkut (Clip-system) Imuletku (clip-kiinnitys) C 32, 37 4.440-911.0 1 kpl ID 32 2,5 m 2.5 m suction hose with dry vacuum cleaner connection, clip connection (C 32). Sovitinkappaleet Letkujen liitoskappale 38 6.902-077.0 1 kpl ID 32 Electrically non-conductive adapter with internal thread. For connecting two suction hoses without connectors. Suitable for DN 32 or DN 35. Jatkoletkut (Clip-system) Jatkoletku (clip-system) 2,5 m 39 6.906-237.0 1 kpl ID 32 2,5 m Electrically non-conductive standard extension hose for all C-32 and C-35 hoses with clip system. Jatkoletku (clip-system) 2,5 m, 40 6.906-277.0 1 kpl ID 32 2,5 m for all C-32 and C-35 hoses, electrically conductive. sähköä johtaa Toimituksen mukana. Saatavilla olevat varusteet.
41 42 43 44 Tuotenumero Määrä Pituus Leveys Kuvaus Sovitin (putkisuutin) Sovitin DN 32-35 41 6.902-083.0 1 kpl ID 32 From DN 32 to DN 35: Plastic adapter (electrically non-conductive). Suitable for BV and T vacuum cleaners. Supistin (putki - suutin) Supistin DN35 - DN32 42 6.902-072.0 1 kpl ID 35 Reducer with internal connecting cone DN 32. Ideal for accessories from the industrial vacuum cleaner range in combination with industrial NT vacuum cleaners. Supistin ja jatko-osasetti Supistin/sovitinsetti ID40/35, 43 2.860-117.0 1 kpl DN 40/35, DN 35/32 (tube -> nozzle), plastic. 35/32 muovia Mikrosuihkutussetit SUUTIN SETTI DN32 44 2.860-143.0 4 kpl ID 32 Nozzle kit (DN 32) for all industrial dry vacuum cleaners, includes crevice tool, upholstery tool, round brush and clip holder. Toimituksen mukana. Saatavilla olevat varusteet.
Tuotenumero Kuvaus Imuvarusteet Toimituksen mukana. 1 6.906-089.0 Saatavilla olevat varusteet.