LX 70. Ominaisuuksien mittaustulokset 1-kerroksinen 2-kerroksinen. Fyysiset ominaisuudet, nimellisarvot. Kalvon ominaisuudet



Samankaltaiset tiedostot
Transkriptio:

LX 70 % Läpäisy 36 32 % Absorptio 30 40 % Heijastus 34 28 % Läpäisy 72 65 % Heijastus ulkopuoli 9 16 % Heijastus sisäpuoli 9 13 Emissiivisyys.77.77 Auringonsuojakerroin.54.58 Auringonsäteilyn lämmönsiirtokerroin.47.50 Auringonsäteilyn valikoivuusindeksi 1.33 1.12 Lämmönsiirtokerroin auringonvalosta 1.53 1.30 % 53 50 % Auringonlämmön vaikutuksen 45 33 % Häikäisyn 20 20 75 microns Lasi LX 70 kalvolla 53% 72% >9 kaksikerroksisen ikkunan (+) sisäpuolelle

Silver 20 % Läpäisy 11 10 % Absorptio 39 47 % Heijastus 50 43 % Läpäisy 16 15 % Heijastus ulkopuoli 58 58 % Heijastus sisäpuoli 58 59 Emissiivisyys.70.70 Auringonsuojakerroin.28.37 Auringonsäteilyn lämmönsiirtokerroin.24.32 Auringonsäteilyn valikoivuusindeksi.57.41 Lämmönsiirtokerroin auringonvalosta.67.47 % 76 68 % Auringonlämmön vaikutuksen 72 57 % Häikäisyn 82 81 16% Lasi Silver 20 kalvolla 58% 58% 76% >9 kaksikerroksisen ikkunan (+) sisäpuolelle

Solar Bronze 20 % Läpäisy 12 10 % Absorptio 41 51 % Heijastus 47 39 % Läpäisy 22 20 % Heijastus ulkopuoli 37 39 % Heijastus sisäpuoli 36 37 Emissiivisyys.66.66 Auringonsuojakerroin.30.40 Auringonsäteilyn lämmönsiirtokerroin.26.34 Auringonsäteilyn valikoivuusindeksi.73.50 Lämmönsiirtokerroin auringonvalosta.85.59 % 74 66 % Auringonlämmön vaikutuksen 69 55 % Häikäisyn 76 75 22% Lasi Solar Bronze 20 kalvolla 37% 36% 74% >9 kaksikerroksisen ikkunan (+) sisäpuolelle

A better enviroment inside and out. Solar Gard Solar Control Window Films Stainless Steel 20 Performance results single double Solar energy % Transmittance 21 18 % Absorptance 56 59 % Reflectance 23 23 % Transmittance 24 22 % Reflectance exterior 28 31 % Reflectance interior 25 26 Emissivity.84.84 Winter U-Factor (W/m² C) 5.87 2.71 Shading coefficient.44.57 Solar heat gain coefficient.38.49 Solar selectivity index -.53.38 luminous efficacy (VLT/SC) Light to solar heat gain factor.62.44 % Ultraviolet light blocked (@ 300 to 380 nm) >99 >99 % Total solar energy rejected 62 51 % Summer solar heat gain reduction 55 34 % Glare reduction 74 73 Physical properties nominal Gauge Tensile strength 2,100 kg/cm 2 Melting point 260 265 C Film performance Performance results were generated from testing thick clear glass. transmittance reflectance (exterior) reflectance (interior) Ultraviolet light blocked Total solar energy rejected WITHOUT FILM 24% 25% 28% WITH STAINLESS STEEL 20 WINDOW FILM 62% >9 PERFORMANCE PERCENTAGE All performance results are based on the film installed on the inside surface of and + thick, clear glass. Notes 1. Solar Gard is a participating member of AIMCAL (the Association of Industrial Metallizers, Coaters and Laminators), IWFA, and EWFA. Performance results are calculated using NFRC methodology and LBNL Window 5.2 software, and are subject to variations within industry standards and only intended for estimating purposes. 2. These test data contain only results arrived at after employing specific test procedures and standards. The included data do not constitute a recommendation for, endorsement of, or certification of the product or material tested. These data are provided for informational purposes only and are not to be considered part of the basic representation or warranty, expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose, that its products will conform to these test data. Solar Gard s limited warranty should be carefully reviewed prior to purchasing any Solar Gard product. Extrapolation of data from the sample or samples relation to the batch or lot from which data were obtained may not correlate and should be interpreted accordingly with caution. Solar Gard shall not be responsible for variations in quality, composition, appearance, performance, or other feature of similar subject matter produced by persons or under conditions over which Solar Gard has no control. 3. Performance results for summer solar heat gain reduction and glare reduction are calculated by comparing filmed glass to that of untreated glazing. www.solargard.com SK0314SS20INT 02/12 Copyright 2012, Saint-Gobain Performance Plastics Corporation and/or its affiliates All Rights Reserved www.solargard.com Please recycle

Sterling 20 % Läpäisy 14 13 % Absorptio 40 48 % Heijastus 46 39 % Läpäisy 22 21 % Heijastus ulkopuoli 45 46 % Heijastus sisäpuoli 42 43 Emissiivisyys.67.67 Auringonsuojakerroin.32.41 Auringonsäteilyn lämmönsiirtokerroin.28.35 Auringonsäteilyn valikoivuusindeksi.69.51 Lämmönsiirtokerroin auringonvalosta.79.60 % 72 65 % Auringonlämmön vaikutuksen 67 53 % Häikäisyn 76 74 22% Lasi Sterling 20 kalvolla 42% 45% 72% >9 kaksikerroksisen ikkunan (+) sisäpuolelle

Sterling 40 % Läpäisy 27 24 % Absorptio 36 44 % Heijastus 37 32 % Läpäisy 41 38 % Heijastus ulkopuoli 33 35 % Heijastus sisäpuoli 30 31 Emissiivisyys.68.68 Auringonsuojakerroin.46.51 Auringonsäteilyn lämmönsiirtokerroin.40.44 Auringonsäteilyn valikoivuusindeksi.89.75 Lämmönsiirtokerroin auringonvalosta 1.03.86 % 60 56 % Auringonlämmön vaikutuksen 53 41 % Häikäisyn 54 53 33% 30% Lasi Sterling 40 kalvolla 41% 60% >9 kaksikerroksisen ikkunan (+) sisäpuolelle

Sterling 70 % Läpäisy 55 46 % Absorptio 29 36 % Heijastus 16 18 % Läpäisy 69 63 % Heijastus ulkopuoli 13 19 % Heijastus sisäpuoli 12 17 Emissiivisyys.75.75 Auringonsuojakerroin.75.72 Auringonsäteilyn lämmönsiirtokerroin.65.63 Auringonsäteilyn valikoivuusindeksi.92.88 Lämmönsiirtokerroin auringonvalosta 1.06 1.00 % 35 37 % Auringonlämmön vaikutuksen 24 16 % Häikäisyn 23 22 13% 12% 35% Lasi Sterling 70 kalvolla 6 >9 kaksikerroksisen ikkunan (+) sisäpuolelle